RAM Universal SMALL Tab-Tite Holder for 7" Screen Tablets including the Samsung Galaxy, Dell Streak 7 & BlackBerry PlayBook Now that you've got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. The Tab-Tite is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES: Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Included With Purchase: (1) Spring loaded back plate (2) Support cups for thin tablets with no skins (2) Support cups for thin tablets with thin or no skins (2) Support cups for thick tablets with cases Mounting hardware The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Height: 7.3" minimum to 9.62" maximum Width: Maximum width to 5.31" Depth: 1.06" maximum Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.31" Depth: 0.125" minimum to 0.56" maximum Cradle Dimensions: Height: 5" minimum to 9.1" maximum Width: Maximum width to 4.70" Depth: 0.125" minimum to 0.44" maximum Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Diamond base adapter not included with purchase.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases. Features: The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum, high-strength composite, powder-coated steel Weight: 1.98 lb. Compatible Devices: Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2

RAM Tab-Tite Universal Clamping Cradle for 10" Screen Tablets WITH OR WITHOUT HEAVY DUTY CASES Get the most out of your tablet with the RAM Tab-Tite spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. The RAM Tab-Tite universal clamping cradle is compatible with the following tablets & cases: 10" Screen Tablets with or without heavy duty cases 10" Screen Tablets with OtterBox Defender cases 10" Screen Tablets with Gumdrop Drop Tech cases 10" Screen Tablets with Griffin Technology cases 10" Screen Tablets with Belkin cases Many More! The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Maximum Width = 8.12" Length Range = 8.5" to 10.5" Maximum Depth = 1.12" Features: Support cups contain open slots to accommodate for tablets of varying dimensions Spring loaded for ease of removal and insertion of your tablet Full access to all ports Customize height of holder for your tablet Best usage in low vibration environments Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Hardware included to attach to mount.

RAM Universal Large Tab-Tite Holder f/10" Screen Tablets Part #: RAM-HOL-TAB-LGU Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. The Tab-Tite™ is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES: Apple iPad & iPad 2 Asus EEE Pad Asus Eee Pad Transformer HP TouchPad Lenovo LePad Slate LG G-Slate LG Optimus Pad Motorola XOOM Pandigital R90A200 Samsung Galaxy 10.1 Toshiba Thrive Most 10" Screen Tablets Included With Purchase: (1) Spring loaded back plate (2) Support cups for thin tablets (2) Support cups for wide tablets Mounting hardware The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Height: 8.5" minimum to 10.75" maximum Width: Maximum to 7.75" Edge Depth: Maximum to 0.56" Cradle Dimensions: Height: 8.25" minimum to 10.75" maximum Width: Maximum to 6.8" Edge Depth: Maximum to 0.50" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite

RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: 10" Screen Tablets with LifeProof nüüd cases 10" Screen Tablets with Lifedge cases 10" Screen Tablets with heavy duty cases The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 8.75" minimum to 10.75" maximum Width: maximum to 8.25" Depth: maximum to 1.1" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM POD I Universal Vehicle Mount with Tab-Tite™ Cradle for the Apple iPad, iPad 2 & HP TouchPad Part #: RAM-B-316-1-TAB3 The RAM-B-316-1-TAB3 consists of a single socket arm, flex rod and Tab-Tite™ cradle. The base mounts to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it's optimum viewing location. The RAM POD I will hold everything you need safely and securely. The RAM Tab-Tite™ is compatible with the following tablets: Apple iPad Apple iPad 2 Apple iPad's with bumper or case including the Otterbox case HP TouchPad HP TouchPad's with bumper or case including the Otterbox case Tab-Tite™ Cradle Features: 1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. Full access to all ports Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

Tab-Tite™ Cradle f/8" Samsung Galaxy Tab A & S2 8.0 w/Case The RAM® Tab-Tite&$153; spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0, Tab A 8.0 with S Pen Tab S2 8.0 with Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.25" to 11" Width: 5" to 5.88" Depth: 0.3" to 0.67" Features: Support cups are designed to offer access to ports and tablet functions Modular design makes upgrading to a new tablet simple and cost effective Dual-spring loaded tension provides secure support for your tablet Easy, quick release of your tablet for on-the-go applications Versatility of cradle allows for attachment to many RAM mounting solutions Lifetime warranty Made in U.S.A. Material: High Strength Composite Weight: 0.69 lbs.

RAM Tab-Tite™ Holder for Small Tablets including the Amazon Kindle Fire, Apple iPad mini, Google Nexus 7 & Motorola XYBOARD 8.2 Now that you've got the right tablet for the job, you are going to need the right mounting system. Get the most out of your tablet with the RAM Tab-Tite. With interchangeable cup ends, you can fit the cradle to your device for a near custom fit. This spring loaded design makes it easy to load and unload your device, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. RAM universal Tab-Tite for tablets including the Samsung Galaxy Tab and BlackBerry PlayBook. Compatible Tablets: Amazon Kindle Fire WITH OR WITHOUT CASE, SKIN, SLEEVE Apple iPad mini WITHOUT CASE, SKIN, SLEEVE Google Nexus 7 WITHOUT CASE, SKIN, SLEEVE Motorola XYBOARD 8.2 WITH OUT WITHOUT CASE, SKIN, SLEEVE TABLETS WITH FOLDERS, SLEEVES, SKINS, BUMPERS & CASES Any tablet that will fit the cradle dimensions listed below Cradle Dimensions: Height: 6.8" minimum to 9" maximum Width: Maximum width to 5.31" Depth: 0.125" minimum to 0.625" maximum Features: Support cups contain open slots to accommodate fordevices of various sizes, including tablets in protective sleeves. Back plate can support various size support cups Spring loaded tension provides secure support for device Spring loaded cradle allows for quick release of device Full access to all ports Material: High Strength Composite

Tab-Tite™ Cradle for 8" Tablets - Samsung Galaxy Tab 4 8.0 & Tab E 8.0 The RAM® Tab-Tite™ spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0, Tab S 8.4, Tab E 8.0 and Tab A 8.0 (2017). The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Length: 8.08" to 10.69" Width: 3.77" to 4.96" Depth: 0.13" to 0.36" Features: 1. Support cups are designed to offer access to ports and tablet functions 2. Modular design makes upgrading to a new tablet simple and cost effective 3. Dual-spring loaded tension provides secure support for your tablet 4. Easy, quick release of your tablet for on-the-go applications 5. Versatility of cradle allows for attachment to many RAM mounting solutions 6. Lifetime warranty 7. Made in U.S.A. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.5 lbs.

Double Twist-Lock™ Suction Cup Mount w/Tab-Tite™ Universal Spring Loaded Cradle f/Apple iPad 1-4 with or without Light Duty Case The RAM-B-189-TAB3U consists of a double 3.3" twist lock suction cup base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded Tab-Tite™ cradle makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.5" to 11.125" Width: 6.38" to 7.75" Depth: 0.13" to 0.56" Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty 8. Made in the U.S.A. Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.8 lbs.

RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. Weight:0.65 lbs.

RAM TAB-TITE Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet. Compatible Devices: Apple iPad mini WITH CASE, SKIN, SLEEVE Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE The Tab-TiteT cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 6.80" minimum to 9" maximum Width: Maximum width to 5.68" Depth: 0.125" minimum to 1" maximum Tab-Tite Cradle Features: Support cups contain open slots to accommodate for tablets of various sizes Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet High strength materials maximize longevity of cradle Full access to all ports Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

Tab-Tite™ Drill-Down Mount with Backing Plate for Small Tablets This mount consists of a 2.10" x 2.60" backer plate, double socket arm, round base adapter, and Tab-Tite™ universal clamping cradle. The spring-loaded Tab-Tite™ cradle makes it easy to load and unload your tablet while keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet. By allowing access to audio jacks, USB, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that fits the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 7.375" - 10", Width Range: 4" - 5.31", Depth Range: .13" - 1.06" Socket to Socket Length (inch): 3” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum, high-strength composite, and steel Weight: 1.2 lb.