|
RAM® Printer Cradle with U-Bolt Mount for Brother RuggedJet + More
Specifications:
Hardware Included: Assembly Hardware - (2) 1/4"-20 U-Bolts for 1.25" - 1.5" Rails, (4) 1/4"-20 Nylock Nuts, (4) Rubber Caps
Clamp Range: 1.25" - 1.5" diameter
Socket to Socket Length: 4.66"
Ball Size: C Size (1.5")
Weight Capacity: Standard Use: 4 lbs/Heavy-Duty Use: 3 lbs
Materials: Marine-grade aluminum, High strength composite
Packaging Type: Poly Bag
Weight: 1.9 lb
|
83.14 |
|
|
RAM® Printer Cradle with U-Bolt Mount for Brother RuggedJet RJ-4030/40
The RAM Printer Mount for the Brother RuggedJet™ 4 is ideally suited to help create the optimum mobile office environment, regardless of vehicle or application. Our form-fit design has no sharp edges and adds little to the overall size of the printer. After all, one of the key features of the RuggedJet™ 4 is its size. Why purchase a bulky mount made from metal when RAM has the ideal solution both low profile and durable? Multiple mounting options are available to accommodate a wide variety of mounting configurations. RAM enables mounting of the printer where it is best for you, not where it is best for the mount.
Specifications:
Hardware Included: (4) #8-32 x 5/8" Machine Screws, (4) #8-32 Nylock Nuts
Hole Pattern: 4-Hole AMPS: 1.181" x 1.496"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 0.45 lbs
|
30.23 |
|
|
Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets
The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
X-Grip® Cradle Dimensions
Minimum Width = 2.25"
Maximum Width = 5.75"
Depth = 0.875"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.
|
84.79 |
|
|
RAM® Mount Handi-Case™ with U-Bolt Mount
The RAM-149Z-HC1U consists of a zinc-coated u-bolt base, double socket arm, 2.5" diameter round base, and Rugged Handi-Case™. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allows for almost infinite adjustment and perfect viewing angles. The RAM Handi-Case™ is capable of doing so many tasks it will astound you.
Applications:
For any professional on the go, this is the tool to keep you organized at home, at the office, or on the go regardless of what you ride, drive, or fly
When a briefcase is too much but a notepad, is not enough, the Handi-Case™ is exactly what you need
Beyond just a writing surface, you get document storage, a tool holder, pen and pencil storage, and of course, RAM's rugged construction
No matter where the job takes you, the RAM Handi-Case™ is ready to multi-task
Specifications:
Clamp Range (inch): .5" - 1.25" diameter
Socket to Socket Length (inch): 4.66"
Ball Size (inch): C Size (1.5")
Packaging Type: Polybag
Weight Capacity (lbs): Standard use-4 lbs. / Heavy-duty use-3 lbs.
Materials: Marine-grade aluminum; High strength composite
Input Connector: mUSB Female
Weight (lbs): 3.42 lb
Hardware Included (inch):
Assembly Hardware
(1) 1/4"-20 U-Bolt for .5" - 1" Rails
(1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
(2) 1/4"-20 Nylock Nuts
(2) Rubber Caps
(1) U-Bolt Spacer
|
114.30 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve
The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 7" minimum to 8.875" maximum
Width: maximum to 4.7"
Depth: maximum to 0.43"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
25.18 |
|
|
Locking EZ-ROLL'R™ Cradle for the Garmin nuviCam and dezlCam
The Garmin nuviCam™ & dezlCam™ keeps an extra eye on the road. And RAM Mounts custom cradle for these innovative devices keeps traffic information in your line of sight and keeps the device secure in your vehicle.
The cradle allows for full range of motion of the device camera and integrates the factory Garmin magnetic dock for access to charging. The high-strength composite mount integrates a cable retention system to prevent accidental unplugging. The custom-fit cradle also has a locking option that is installed using press-fit nuts to enhance security. The cradle has two location options to attach the RAM ball (comes with 1" B-Size ball).
Compatible Devices:
Garmin nuviCam™ LMTHD
Garmin dezlCam™ LMTHD
Features:
Open access to all electronic ports including speaker, microphone, SD and mUSB slots
Allows for full range of motion for the camera
Roller design for super smooth placement and removal of the GPS
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Cradle integrates the factory Garmin magnetic dock
Comes with B sized, 1" ball
Locking attachment allows for a low profile theft deterrent
Lifetime warranty
Made in the U.S.A
Material:
High Strength Composite
|
18.88 |
|
|
EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790
The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle. With the included cradle lock as a theft deterrent, keep the Garmin Fleet protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker and microphone
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
|
21.73 |
|
|
Power-Grip™ Universal Scanner Gun Holder
Whether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has once again innovated with the Power-Grip™ Universal Scanner Gun Holder. This product is compatible with a wide range of ruggedized 2D barcode scanners and is compatible with RAM's full range of forklift mounting systems, as well as mounting systems for a variety of mounting scenarios. Using a variety of high strength, quality materials, The Power-Grip™ securely locates your 2D barcode scanner while you aren't using it. When required, the 2D barcode scanner easily removes to quickly scan the desired item. The unique open bottom design enables scanning while in the holder. Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required. Backed with RAM's renowned lifetime warranty, the Power-Grip™ Universal Scanner Gun Holder is an essential accessory for your 2D barcode scanner.
Internal Dimensions:
Width = 3.47"
Length = 2.16"
Depth = 4.9"
Features:
Unique open bottom design enables scanning while in the holder
Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Integrated lanyard holes
Lifetime warranty (excludes fin grips)
Included:
Power-Grip™ Holder
Hardware for attaching to compatible RAM mounts
Material:
High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. Lifetime warranty includes the Power-Grip™ holder; the elastomeric fin grips are not included in the warranty.
|
28.64 |
|
|
Power-Grip™ XL Universal Scanner Gun Holder
The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.
Internal Dimensions:
Width = 3.96"
Length = 2.66"
Depth = 7.43"
Features:
Unique open bottom design enables scanning while in the holder
Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required
Form fitted cradle supports and protects device without vibration
High strength materials ensure product longevity
Integrated lanyard holes
Lifetime warranty (excludes fin grips)
Included:
RAM® Power-Grip XL™ Holder
Hardware for attaching to compatible RAM® Mounts
Material:
High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts.
|
35.69 |
|
|
RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in Diameter
The RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
|
23.22 |
|
|
Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter
The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" D-Size Ball
Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight: 0.54 lbs.
|
33.78 |
|
|
RAM® Spine Clip Garmin Mount with Handlebar U-Bolt Base
The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. Included are a medium-length RAM® double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5” to 1.25” in diameter. This ideal motorcycle mount is perfect for securing your Garmin device in the harshest conditions.
Features:
Kit includes RAM® Spine Clip Holder for Garmin, B size diamond ball base, short double socket arm, and RAM® U-Bolt base
The holder secures any Garmin handheld device with an integrated spine connection
The U-bolt base includes a bar spacer and accommodates rails from .5" to 1.25" in diameter
Backed by a lifetime warranty
Compatible Garmin Devices:
Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™
Includes:
Assembly Hardware
(1) 1/4"-20 U-Bolt for .5" - 1" Rails
(1) 1/4"-20 U-Bolt for 1" - 1.25" Rails
(2) 1/4"-20 Nylock Nuts
(2) Rubber Caps
(1) U-Bolt Spacer
Specifications:
Clamp Range (inch): .5" - 1.25" diameter
Socket to Socket Length (inch):1.75"
Ball Size: B Size (1")
Weight: 0.68 lb.
Materials: Marine-grade aluminum, high-strength composite
Weight Capacity:
Standard Use: 2 lbs
Heavy-Duty Use: 1 lb
|
36.26 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Self-Leveling Cup Holder & Cozy
Drink Cup Mount Description:
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Motorcycle Handlebar Mount Description:
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware for tubing that is 0.50" to 1.25" in diameter.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
38.78 |
|
|
RAM Rail Base with "Rust-Proof" Stainless Steel U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in Diameter
The RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The "Rust-Proof" stainless steel u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
U-Bolt Dimensions:
Accommodates rails from 0.5" to 1" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
17.96 |
|