RAM® Drop-N-Lock™ Scanner Gun Holder The RAM Drop-N-Lock™ Scanner Gun Holder is a specially designed cradle that will hold most types of Gun Scanner handles. On the side of the cradle is a spring loaded leaver that will securely hold the Gun Scanner in the cradle. Simply drop the scanner handle into the holder and it will lock in place immediately. To remove simply lift the tab behind the holder and your scanner gun will lift right out with ease. Internal Holder Dimensions: Inside Width: 1.46" Inside Length: 2.5" Inside Height: 5.11" Specifications: Material: High Strength Composite  Note: The "U" in the part number reflects product packaged in poly bag

Power-Grip™ Universal Scanner Gun Holder Whether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has once again innovated with the Power-Grip™ Universal Scanner Gun Holder. This product is compatible with a wide range of ruggedized 2D barcode scanners and is compatible with RAM's full range of forklift mounting systems, as well as mounting systems for a variety of mounting scenarios. Using a variety of high strength, quality materials, The Power-Grip™ securely locates your 2D barcode scanner while you aren't using it. When required, the 2D barcode scanner easily removes to quickly scan the desired item. The unique open bottom design enables scanning while in the holder. Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required. Backed with RAM's renowned lifetime warranty, the Power-Grip™ Universal Scanner Gun Holder is an essential accessory for your 2D barcode scanner. Internal Dimensions: Width = 3.47" Length = 2.16" Depth = 4.9" Features: Unique open bottom design enables scanning while in the holder Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required Form fitted cradle supports and protects device without vibration  High strength materials ensure product longevity  Integrated lanyard holes Lifetime warranty (excludes fin grips) Included: Power-Grip™ Holder Hardware for attaching to compatible RAM mounts Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. Lifetime warranty includes the Power-Grip™ holder; the elastomeric fin grips are not included in the warranty.

Power-Grip™ XL Universal Scanner Gun Holder The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.  Internal Dimensions: Width = 3.96" Length = 2.66" Depth = 7.43" Features: Unique open bottom design enables scanning while in the holder Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Integrated lanyard holes Lifetime warranty (excludes fin grips) Included: RAM® Power-Grip XL™ Holder Hardware for attaching to compatible RAM® Mounts Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. 

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Double Socket Arm with Small Size Locking Knob for 1.5" Ball Bases The RAM-201U-BL, standard double socket arm with small size locking knob, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. The locking knob, includes a brass 1/4"-20 thread; this allowing you to disengage the screwing of the knob. Once you have set your mount in the location you need, you can lock it in place and feel safe that your mounted device will stay right where you left it. Dimensions: Overall Length: 5.625" Socket-To-Socket Length: 4.5" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Backing Plate Adapter  2.10” x 2.60” steel backing plate with hardware and two-hole patterns: 4-hole AMPS pattern with #8-32 threaded holes, and 4-hole 2" x 2.5" pattern with #10-24 threaded holes. Included hardware can attach to ball bases such as RAM-202U and RAM-202U-225. Features: 2.10" x 2.60" steel backing plate with hardware attaches to a variety of RAM® Mounts ball bases Includes screws and lock washers Backed by a lifetime warranty Hardware Included: (1) 2.1" x 2.6" Stainless Steel Backing Plate (4) #10-24 x 1" Machine Screws (4) #10 Lock Washers (4) #8-32 x 1" Machine Screws (4) #8 Lock Washers Specifications: Product Dimensions: 2.1" x 2.6" x .15"  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" (#8-32)/1.5" x 2" (#10-24) Materials: Steel Weight: 0.3 lbs

Dashboard Mount with Backing Plate for 7"-8" Tablets with Cases The RAM® Tab-Tite™ bundle is a rugged mount including the RAM® Tab-Tite™, RAM® Universal Double Ball Mount with Two Round Plates, and RAM® Backing Plate Adapter. The RAM® Tab-Tite™ spring-loaded, quick-release holder offers a secure fit with easy access to the mounted tablet. The spring-loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. The included 2.10" x 2.60" steel backing plate with #8-32 threaded holes attaches to a variety of RAM® Mounts ball bases. Features: The spring-loaded holder secures 7 in. -8 in. tablets with a case; interchangeable end cups allow you to modify the holder when upgrading devices Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Height Range: 8.32" - 10.92", Width Range: 4.43" - 5.3", Depth Range: .13" - .62" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum, high-strength composite, powder-coated steel Weight: 1.98 lb. Compatible Devices: Samsung: Galaxy Tab 4 8.0 with Otterbox Defender Case, Galaxy Tab A 8.0 (2017) with Case, Galaxy Tab A 8.0 (2018) with Case, Galaxy Tab A 8.0 (2019) with Case, Galaxy Tab S 8.4 with Otterbox Defender Case, Galaxy Tab E 8.0 with Verizon Rugged Case, and Galaxy Tab Active2

Adapt-A-Post™ Track Base The RAM® Adapt-A-Post™ Track base will quickly slide and connect to most kayak track systems. Compatible with the full line of RAM® Post and Spline rod holders, the RAM®Adapt-A-Post™ offers a unique locking mechanism that allows the user to insert the post from any direction. Thanks to this efficient design, you no longer need to align your post in any specific position before inserting. Just drop it in and you’re ready. To remove, simply press and hold the side button and your post will come out effortlessly. With an innovative combination of ease and security, the RAM® Adapt-A-Post™ will quickly become one of your favorite kayak accessories. Features: Quick installation, removal and stowage Easily relocate side track base along track Installation at any point on the track Track bases can rotate 360 degrees while mounted to track Compatible Post/Spline rod holders and extensions High strength materials ensure product longevity Lifetime warranty Made in U.S.A. Material: High Strength Composite

X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping. The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles. Features: Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases Made of high-strength composite and steel components for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875" Socket to Socket Length (inch): 2.5” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size (inch): 2.5" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and high-strength composite Weight: 2.42 lb. Compatible Devices: Amazon: Fire HD 10 Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022) ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10 Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000 Google: Nexus 10 and Pixel C HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1 Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10 Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches) LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1 Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2 Nokia: T21 Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z Vankyo: MatrixPad Z4 10" Zebra: ET50 10" and ET55 10"

Portable Side Mount with Dual Lock 4 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 4 Rods.

Portable Side Mount with Dual Lock 6 Rod Holder The great side-mount Rod Holder in a portable version.  Easy to install using a 3M Dual-lock technology.  Simply clean and place the mounting squares where you want and you're done.  The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion.  Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods.  Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations.  Holds up to 6 Rods. 

Portable Side Mount with Dual Lock 8 Rod Holder The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.

RAM® Safe-N-Secure™ Locking Kit for RAM® Tough-Tray™ & Swing Arms Until now, locking features on universal laptop holders have been hard to use or simply get in the way of typing. RAM has made all that just a memory with the new RAM SAFE-N-SECURE™ locking feature. Purchase your laptop mounting system with this option, add it on later, or integrate it into your existing system. No matter what you choose, you’ll have one of the best theft deterrents available to keep your laptop where it belongs, with you. Using keyed locking knobs, this system operates easily and does not detract from the overall versatility you’ve come to love in your RAM Laptop Mount. The four locking knobs allow you to disengage the screwing of the swing arm knobs found on the top of the tele-pole, swing arm joint, and laptop tray connection.  Features: Hardware Included: Assembly Hardware 8 Keys

RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 6" Post  The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 6" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 6" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling. Features: Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops Includes RAM® Tube Jr.™ rod holder with 6" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks The locking button prevents the base from spinning loose with rod holder movement Quick-release mechanism for easy installation and removal of rod holder Backed by a lifetime warranty Specifications: T Bolt Dimensions: .48" x .95" Post Length: 6" Materials: High-strength composite Packaging Type: Poly Bag Weight: 1.02lbs

RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 4" Post The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 3.75" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 3.75" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ Base is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling. Features: Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops Includes RAM® Tube Jr.™ rod holder with 3.75" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks The locking button prevents the base from spinning loose with rod holder movement Quick-release mechanism for easy installation and removal of rod holder Backed by a lifetime warranty Specifications: T Bolt Dimensions: .48" x .95" Post Length: 3.75" Materials: High-strength composite Packaging Type: Poly Bag Weight: 0.94lbs