|
Horizontal Swing Arm Mount for Lowrance Elite-5 Series
Horizontal Base Mount with Swing Arm C Size 1.5" Ball and Lowrance Mounting Base.
Compatible Devices:
Lowrance Elite-5 Series
|
120.72 |
|
|
1.5" Ball "Rugged Use" Composite Mount f/Lowrance Elite-5 & Mark-5 Series Fishfinders
The RAP-101U-LO11 consists of a 2.5" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
|
37.51 |
|
|
RAM 1.5" Ball Marine Electronic "Rugged Use" Mount f/the Lowrance Elite 5 Series
Part #: RAM-101-LO11
The RAM-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
This mount is compatible with the following electronic devices:
Lowrance Elite-5
Lowrance Elite-5M
Lowrance Elite-5X
Raymarine Apelco Fishfinder with matching hole pattern
Ball Size:
1.5" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
|
51.59 |
|
|
RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.
Compatible Devices:
Lowrance Elite-5
Lowrance Elite-5 DSI
Lowrance Elite-5 Gold
Lowrance Elite-5x
Lowrance Elite-5x DSI
Lowrance Elite-5m
Lowrance Elite-5m Gold
Lowrance Mark-5x
Lowrance Mark-5x DSI
Lowrance Mark-5x DSI Portable
Lowrance Mark-5x Pro
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
RAM Double Socket Arm for 1.5" Ball Bases
The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball
The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
45.52 |
|
|
1" Ball "Light Use" Composite Mount f/Lowrance Elite-4 & Mark-4 Series Fishfinders
The RAP-B-101U-LO11 consists of a composite 2.5" diameter round base with the universal AMPS hole pattern, composite double socket arm and adapter base that inserts directly to the back of Lowrance Elite-4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
High Strength Composite
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this mount for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.
|
24.30 |
|
|
RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders
Part #: RAM-202U-LO11
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.
Compatible Devices:
Lowrance Elite-5
Lowrance Elite-5 DSI
Lowrance Elite-5 Gold
Lowrance Elite-5x
Lowrance Elite-5x DSI
Lowrance Elite-5m
Lowrance Elite-5m Gold
Lowrance Mark-5x
Lowrance Mark-5x DSI
Lowrance Mark-5x DSI Portable
Lowrance Mark-5x Pro
Lowrance Elite-7 TI
Lowrance Elite-7 TI2
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
|
14.04 |
|
|
RAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 Series
The RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices listed below.
This base is compatible with the following electronic devices:
Humminbird 700 Series
Humminbird 500 Series
Humminbird 300 Series
Humminbird 100 Series
Humminbird Matrix Series (excluding Matrix 97)
Lowrance Elite-5
Lowrance Elite-5M
Lowrance Elite-5X
Raymarine Apelco Fishfinder with matching hole pattern
Ball Size:
1.5" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. The RAM-107BU is a "rugged use" base, designed to hold large marine electronic devices.
|
20.36 |
|
|
RAM® 12" Upper Pole with Double Swing Arms & Round Plate
The RAM-VP-SW1-12 consists of a 12" upper male Tele-Pole™, double swing arm, and 2.5" round base that contains the universal AMPs hole pattern. The Tele-Pole™ can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with a rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".
Features:
Hardware Included: Assembly Hardware
Hole Pattern: Tele-Pole: 2.625" x 2.625"/Round Plate: 4-Hole AMPS: 1.181" x 1.496" & 3-Hole 120-Degree: 1.812" Diameter
Plate Size: 2.5" Diameter
Ball Size: C Size (1.5")
Materials: Powder-coated steel/Marine-grade aluminum
Weight: 4.4 lbs
|
95.80 |
|
|
1" Ball Marine Electronics Mount with Diamond Base
The RAM-B-107U-238 consists of a double socket arm, diamond base and connecting Humminbird/Apelco marine base. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
RAM 1" Ball Marine Electronic Mount with Diamond Base for the Humminbird 100-700 Series, Matrix Series and Lowrance Elite-5 Series.
Features:
Overall Height: 5"
Weight Capacity: To 2.25kg approximately 5 lbs
Ball Size: 1: Rubber "B" Ball Size
Material: Powder Coated Marine Grade Aluminum
Note: The "U" in the part number reflects product will be packaged in a poly bag
Weight: 0.68 lbs
|
36.72 |
|
|
Vertical Mounting Base with Double 6" Swing Arm and Swivel Single Socket for 1.5" Balls
Features:
Weight: 3.45 lbs.
Double 6" Swing Arm
Swivel Single Socket
Made specifically for 1.5" balls
|
91.28 |
|
|
Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short Arm
The RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
|
28.49 |
|
|
The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
44.42 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM 1" Ball Marine Electronic "Light Use" Mount for the Lowrance Elite-4 Series
Part #: RAM-B-101-LO11
The RAM-B-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly to the back of Lowrance Elite 4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
This mount is compatible with the following electronic devices:
Lowrance Elite-4
Lowrance Elite-4 DSI
Lowrance Elite-4 Gold
Lowrance Elite-4x
Lowrance Elite-4x DSI
Lowrance Elite-4m
Lowrance Mark-4
Ball Size:
1" Rubber "B" Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM recommends this mount for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.
|
35.11 |
|
|
RAM Single Arm Ball Mount Horizontal
The RAM single swing and socket arm mount includes a 6" STRAIGHT swing arm mounted on a horizontal surface mounting base. At the end of the mount is a rectangular 6.25" x 2" top base. The pivoting point of the rectangle base allows 180 degree rotation, the swing arm allows a 360 degree rotation.
RAM Marine Electronic Mounts Page
RAM-109HSB Dimensions
A. Center of knob to center of ball socket: 6"
B. Overall length of swing arm assembly: 10.75"
C. Height from base to top of knob: 4.89"
Part number reflects product packaged in clear clam shell for store shelf display. For additional specifications, see components and drawings tabs.
Ball Size: 1.5 Inch Rubber Ball
Material: Powder Coated Marine Grade Aluminum
Color: Black Powder Coat
|
72.46 |
|