|
Twist-Lock Triple Suction Mount with 1/4"-20 Stud
The RAP-B-365-224-202AU consists of a triple 3.3" diameter suction cup twist lock base, double socket arm and round base adapter that contains a 1/4"-20 male camera thread. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
|
66.49 |
|
|
Medium Tough-Claw w/1/4"-20 Stud
Features:
1/4"-20 Stud
Medium Tough-Claw
Weight: 0.94 lbs.
|
55.14 |
|
|
RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & Camcorders
The RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Compatible Cameras:
Contour GPS
Contour HD
Gobandit GPS-HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.11 |
|
|
RAM 1 Inch Ball with 1/4-20 Stud for Cameras
The RAM-B-237U, universal camera and camcorder base consists of a 1" diameter rubber ball, connected to a 1/4"-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
Compatible Cameras:
Contour GPS
Contour HD
Gobandit GPS-HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
8.28 |
|
|
Twist-Lock Triple Suction Cup Ball Base
The RAP-B-365-224-1U, triple suction cup base, consists of a 1" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection with 1" double socket arms to any non-porous surface, like a windshield, with confidence.
Features:
Material: High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
|
42.40 |
|
|
RAM® Tough-Ball™ with 1/4"-20 x .50" Threaded Stud
The RAP-379U-252050 consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post and tooth lock washer.
Hardware Included:
(1) 1/4" Tooth Lock Washer
Thread Pitch:
1/4"-20 x .5"
Ball/Socket Size:
C Size (1.5")
Weight Capacity:
4 lbs
Materials:
High strength composite
Stainless steel threads
|
10.56 |
|
|
RAM® Tough-Ball™ with 1/4"-20 x .50" Threaded Stud for Kayaks
The RAP-379U-252050-KAY1 consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 X .50" male threaded post and tooth lock washer.
Hardward Included:
(1) 1/4" Tooth Lock Washer
Thread Pitch:
1/4"-20 x .5"
Ball/Socket Size:
C Size (1.5")
Weight Capacity:
4 lbs
Materials:
High strength composite
Stainless steel threads
|
10.68 |
|
|
Medium Tough-Claw w/Short Arm 1/4"-20 Stud
Features:
Medium Tough-Claw
Short Arm
1/4"-20 Stud
Weight: 0.84 lbs.
|
53.70 |
|
|
Power Post 1/4 - 20 Stud
• Insulated bases are glass-reinforced Nylon
• All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16.3.2.)
• Studs are 300 series stainless steel
• Assembly includes stainless steel hex nut, split lockwasher, and flat washer
• Rated for 48VDC Maximum
• Current ratings are dependent on wire and terminal size utilized
|
3.94 |
|
|
2307 Common 150A BusBar - (4) 1/4"-20 Studs w/Cover
Features:
The industry standard busbar for positive distribution
The industry standard busbar for the collection of negative or AC ground circuits
Specifications:
Maximum Voltage: 300V AC / 48V DC
Number of Terminal Studs: 4
Terminal Type: 1/4" Stud
Continuous Rating: 130A AC / 150A DC
Base Material: Reinforced Polycarbonate
Bus Material: Tin-Plated Copper CDA 110 / UNS 11000
Cover Material: Clear Polycarbonate
Weight: 0.39lb (0.18 kg)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.66 |
|
|
RAM Twist Lock Suction Cup Mount with 1" Ball Adapter that contains a 1/4"-20 Thread for Cameras
The RAM-B-166-237U consists of a 3.25" suction cup locking base, double socket arm and 1" rubber ball that contains a 1/4"-20 camera male thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. The mount contains adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.
Ball Size: 1 Inch Rubber Ball
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
|
36.97 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base & 1" Ball Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149Z-237U
The RAM-B-149Z-237U consists of a zinc coated u-bolt base, double socket arm and 1" diameter rubber ball, connected to a 1/4"-20 camera thread. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob, allows for infinite articulation and optimum viewing angles. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. Also included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Compatible Cameras:
Contour GPS
Contour HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.49 |
|
|
RAM® Tough-Ball™ with 1/4"-20 x .25" Threaded Stud
The RAM Tough-Ball™. Why call it tough? Because this latest addition to the RAM product line has steel inside and out. The seamless transition between RAM versatility and steel durability allows for a multitude of real world, and out of this world, applications. With so many of the things we use incorporating threads and fasteners, there really is no limit to the number of uses you’ll find for the RAM Tough-Ball™.
The RAP-379U-252025 consists of a 1.5" diameter rubber ball, connected to a 1/4"-20 X .25" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera.
Thread Pitch:
1/4"-20 x .25"
Ball/Socket Size:
C Size (1.5")
Weight Capacity:
4 lbs
Materials:
High strength composite
Stainless steel threads
|
10.43 |
|
|
RAM® Tough-Ball™ with 1/4"-20 x .375" Threaded Stud
Features:
Threaded Pitch: 1/4"-20 x .375"
Ball/Socket Size: C Size (1.5")
Weight Capacity: 4 lbs
Materials:
High strength composite
Stainless steel threads
|
10.39 |
|
|
RAM® Double Ball Mount with 1/4"-20 Male Thread - Medium Arm
The RAM-101AU consists of a double socket arm mount, one round 2.5" diameter base with the universal AMPS hole pattern and round base with a 1/4"-20 threaded steel stud. The round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Hole Pattern:
4-Hole AMPS: 1.181" x 1.496"
3-Hole 120-Degree: 1.812" Diameter
Features:
Socket to Socket Length: 4.66"
Plate Size: 2.5" Diameter
Materials: Marine-grade aluminum
Product Dimensions: Overall Height: 7.35"
Ball/Socket Size: C Size - 1.5"
|
50.51 |
|