|
Locking Case for the Garmin dezl™760LMT, nuvi® 2797LMT & RV 760LMT
The RAM-HOL-GA61LU consists of a high strength composite locking case and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Custom pocket for factory dock
3. Rugged construction deters theft and protects vulnerable areas of device
4. Secures at 4 corners with provided hardware
5. Will not obstruct GPS signal
6. Secure USB power connection with wire retention
7. Lifetime warranty
8. Made in the U.S.A.
Specifications:
Material: High Strength Composite
Note: *The RAM-HOL-GA61LU was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.
The "U" in the part number reflects product packaged in poly bag.
Weight: 0.45 lbs.
Special Information: Designed for use with third party EOBR equipment and recording hours of service in compliance with CSA (compliance, safety, accountability) initiative. To learn more visit the Federal Motor Carrier Safety Administration (FMCSA) website.
For more information about Garmin Commercial Solutions and PND-based Mobile Resource Management (MRM) Solutions, visit the Garmin website.
|
33.46 |
|
|
Cradle for Garmin dezl™ 760LMT, nuvi® 2797LMT & RV 760LMT
The RAM-HOL-GA54U consists of a high strength composite cradle and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Lifetime warranty
Made in the U.S.A.
Material: High Strength Composite
Note: *The RAM-HOL-GA54U was designed prior to the BC20 wireless backup dock was released. The current design will not allow for that dock module to be integrated into the cradle.
|
25.63 |
|
|
Locking Case f/Garmin dezl™ 770LMTHD
The RAM-HOL-GA70LU is a high-strength composite locking case for the Garmin dezl 770LMTHD. RAM has designed a form-fit cradle that supports the device and protects it from vibration. We have also molded in a sun visor to shield the screen and the diamond hole pattern allows the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker, microphone, and SD slots
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Built in visor prevents glare on screen
Integrates the factory Garmin magnetic dock for charging
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Specifications:
Material: High Strength Composite
The "U" in the part number reflects product packaged in poly bag.
Weight: 0.55 lbs.
|
27.36 |
|
|
RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700
The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.
Features:
Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible
Locks the device in place so it cannot be removed without the use of tools
Made of high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(2) #8-32 x 5/8" Machine Screws
(2) #8-32 Nylock Nuts
(2) 4" Cable Ties
Specifications:
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High Strength Composite
Weight: 0.35lbs
|
18.88 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM Cradle Holder for the Garmin dezl 560LMT & 560LT
This RAM high strength composite cradle is designed to hold the following devices:
Garmin dezl 560LMT
Garmin dezl 560LT
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Patent pending roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
17.59 |
|
|
EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790
The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle. With the included cradle lock as a theft deterrent, keep the Garmin Fleet protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle.
Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Locking Case Features:
Open access to all electronic ports including speaker and microphone
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Locks device in place so it cannot be removed without the use of tools
Lifetime warranty
Made in the U.S.A.
Material:
High Strength Composite
|
21.73 |
|
|
RAM Universal LARGE Tab-Lock Holder for 10" Screen Tablets including the Apple iPad, iPad 2, iPad 3, iPad HD, Motorola XOOM & Motorola XOOM 2
Almost everyone wants a tablet pc so don't let someone get yours for free. Keep it safe with the new RAM locking Tab-Lock tablet holder. This product is sure to make most would-be thieves think twice about trying to steal yours. Our easy to use locking holder not only looks great and performs flawlessly, but it is compatible with RAM's full line of mounting solutions ideally suited for personal and fleet use. Spring loaded and form fitting, this compact yet durable holder won't take up a lot of space yet provides loads of security. With the new Tab-Lock tablet holder, RAM lets you keep your tablet where it belongs...in your possession.
The Tab-Lock will fit the following devices with or without case, skin or sleeve:
Apple iPad
Apple iPad 2
Apple iPad 3
Apple iPad HD
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Motorola XOOM 2 10.1
Pandigital R90A200
Samsung Galaxy Tab 8.9
Samsung Galaxy Tab 10.1
Samsung Galaxy Tab 2 10.1
Toshiba Thrive
Features:
Multiple support cups contain open slots to accommodate for tablets of varying dimensions
Spring loaded for ease of removal and insertion of your tablet
Full access to all ports
Customize height of holder for your tablet
Locking mechanism for theft deterrence
Material:
High Strength Composite
Included with Purchase:
(1) Spring loaded locking back plate
(2) Support cups for thin tablets
(2) Support cups for wide tablets
Mounting hardware
Note:
The "U" in the part number reflects product packaged in poly bag. Round base adapter not included with purchase. To insure your mount is "theft deterrent" proof, it is recommended that the RAM-KNOB3LU be purchased; this part attaches to the mount.
|
73.44 |
|
|
Spine Clip Holder with Ball for Garmin Handheld Devices
With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. For use in nearly any application, the included B size diamond base adapter and hardware allows you to connect your Garmin handheld to any RAM® B size mounting base.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
B Size 1" Rubber Ball
Note:
Part number reflects product packaged in a poly bag.
|
12.46 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve
The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 7" minimum to 8.875" maximum
Width: maximum to 4.7"
Depth: maximum to 0.43"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
25.18 |
|
|
Suction Cup Mount
This adjustable suction cup mount allows you to easily access your compatible device while navigating in your vehicle. Simply suction your mount to the windshield or any smooth, flat surface for easy viewing.
Compatible Devices:
dēzl™ 760LMT
nüvi® 2757LM
nüvi® 2797LMT
RV 760LMT
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
23.99 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin nuvi 200w
Garmin nuvi 205w
Garmin nuvi 250w
Garmin nuvi 255w
Garmin nuvi 260w
Garmin nuvi 265wt
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
8.94 |
|
|
Locking EZ-ROLL'R™ Cradle for the Garmin nuviCam and dezlCam
The Garmin nuviCam™ & dezlCam™ keeps an extra eye on the road. And RAM Mounts custom cradle for these innovative devices keeps traffic information in your line of sight and keeps the device secure in your vehicle.
The cradle allows for full range of motion of the device camera and integrates the factory Garmin magnetic dock for access to charging. The high-strength composite mount integrates a cable retention system to prevent accidental unplugging. The custom-fit cradle also has a locking option that is installed using press-fit nuts to enhance security. The cradle has two location options to attach the RAM ball (comes with 1" B-Size ball).
Compatible Devices:
Garmin nuviCam™ LMTHD
Garmin dezlCam™ LMTHD
Features:
Open access to all electronic ports including speaker, microphone, SD and mUSB slots
Allows for full range of motion for the camera
Roller design for super smooth placement and removal of the GPS
High strength materials ensure product longevity
Form fitted cradle supports and protects device without vibration
Cradle integrates the factory Garmin magnetic dock
Comes with B sized, 1" ball
Locking attachment allows for a low profile theft deterrent
Lifetime warranty
Made in the U.S.A
Material:
High Strength Composite
|
18.88 |
|
|
RAM® X-Grip® Large Phone Mount with Track Ball™ Base & Long Arm
This RAM® Track Mount for large-size phones (RAM-HOL-UN10B-C-354-TRA1U) is made up of a B-size 1" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system, or the RAM® Tough-Track™ line of tracks. Simply insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a B-size long-length socket arm and a RAM® X-Grip® for large-size phones with or without a case. This track mount is ideal for mounting devices to the Jeep JL and Gladiator dashboard track mounts (RAM-DT-204-TRACK-A12U) and the new Ford Bronco dashboard track mount (RAM-DT-207-TRACK-EXA-29BU).
Features:
1" B-size RAM® ball with adjustable T-bolt designed for track mounting systems, including the RAM® Tough-Track™ and other third-party track systems
Features a rubber friction washer and a stainless steel T-bolt; simply insert it into your track and twist the ball clockwise to tighten
Includes a B-size long-length socket arm and a large-size RAM® X-Grip® phone holder
Spring-loaded X-Grip® holds large-size phones and includes an optional device tether for peace of mind during rugged use
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) Optional Tether & (1) Glue Tube for Rubber Caps
Holder Dimensions (inch): Width Range: 1.75" - 4.5" / Depth Range: .875" max
Socket to Socket Length (inch): 5.31"
Ball Size (inch): B Size (1")
Weight Capacity: Standard Use: 2 lbs. / Heavy-Duty Use: 1 lb.
Materials: Marine-grade aluminum, high-strength composite, stainless steel
Packaging Type: Poly Bag
Weight: 0.84 lb.
Compatible Devices:
Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max
Blackberry: Evolve X
Blackview: BV9900, BV9900 Pro
Cat: S42, S62, S62 Pro
Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, RV 770 LMT-S
Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, Pixel 7 Pro
HTC: Bolt, U Ultra
Huawei: Mate 20 X
Kyocera: DuraSport 5G
LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, X venture
Magellan: TR5, TR7
Motorola: Moto e4 plus, moto g4, moto z2, moto z2 play, moto z3
Rand: McNally Road Explorer 5, McNally TND 540
Razer: Phone 2
Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, Galaxy S23 Ultra
Sonim: RS60
Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, Xperia XZ Premium
|
60.90 |
|
|
X-Grip® Large Phone Mount with Low-Profile Medium Tough-Claw™
The RAM® X-Grip® Large Phone Mount with Low-Profile RAM® Tough-Claw™ consists of the medium RAM® Tough-Claw™ base and the universal large RAM® X-Grip® phone holder, connected by the RAM® Pin-Lock™ adapter. The large RAM® X-Grip® features an ‘X’ design that expands and contracts to secure your phone and includes a device tether recommended for outdoor applications. With the RAM® Tough-Claw™ base connected, easily attach the RAM® X-Grip® to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter.
This kit is compatible with handheld devices that fit the dimensions listed below. It is important to verify the dimensions of your handheld device with its case, sleeve, or skin when determining the overall size.
Features:
Low-profile phone mount clamps to your handlebar with the turn of a single knob
includes a medium version of the RAM® Tough-Claw™ base, designed to clamp to round, square, and odd-shaped rails and bars ranging from 1" to 1.6" in outer diameter; rubber pads provide stable gripping and protection of the mounting surface
The spring-loaded 'X' design for large phones with rubber caps sports great holding power without hiding your phone; Includes optional device tether for peace of mind during rugged use; Check the compatibility section below to see if your phone will fit
Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (1) Optional Tether and (1) Glue Tube for Rubber Caps
Hole Dimensions: Width Range: 1.75" - 4.5", Depth Range: .875" max
Clamp Range (inch): 1" - 1.6" diameter
Materials: High-strength composite and stainless steel
Weight: 0.78 lb.
Compatible Devices:
Apple: iPhone 6s Plus, iPhone 7 Plus, iPhone 8 Plus, iPhone Xs Max, iPhone 11 Pro Max, iPhone 12 Pro Max, iPhone 13 Pro Max, iPhone 14 Plus, and iPhone 14 Pro Max
Blackberry: Evolve X
Blackview: BV9900 and BV9900 Pro
Cat: S42, S62, and S62 Pro
Garmin: Drive 50, Drive 51 LM, Drive 52, Drive 61 LM, DriveSmart 51 LMT-S, DriveSmart 61 LMT-S, DriveTrack 71, Nuvi 2788LM, RV 660LMT, and RV 770 LMT-S
Google: Pixel 2 XL, Pixel 3 XL, Pixel 3a XL, and Pixel 7 Pro
HTC: Bolt and U Ultra
Huawei: Mate 20 X
Kyocera: DuraSport 5G
LG: Fiesta 2 LTE, Fiesta LTE, G8S ThinQ, Harmony, Stylo 2 V, Stylo 3, Stylo 3 Plus Titan, Stylo 4, V20, V50 ThinQ, X charge, and X venture
Magellan: TR5 and TR7
Motorola: moto e4 plus, moto g4, moto z2, moto z2 play, and moto z3
Rand: McNally Road Explorer 5 and McNally TND 540
Razer: Phone 2
Samsung: Galaxy A7, Galaxy A7 (2017), Galaxy A7 (2018), Galaxy A8, Galaxy A8 (2016), Galaxy A9 (2016), Galaxy A9 Pro (2016), Galaxy A9 (2018), Galaxy A70, Galaxy A80, Galaxy A90 5G, Galaxy C7, Galaxy C7 Pro, Galaxy C9 Pro, Galaxy E7, Galaxy Grand Neo Plus, Galaxy J7, Galaxy J7 Max, Galaxy J7 V, Galaxy Note 5, Galaxy Note 10 Plus, Galaxy Note20 Ultra, Galaxy On7, Galaxy S10 5G, Galaxy S8, Galaxy S8 Active, Galaxy S21 5G, Galaxy S21+ 5G, Galaxy S21 Ultra 5G, Galaxy S22 Ultra 5G, Galaxy S23+, and Galaxy S23 Ultra
Sonim: RS60
Sony: Xperia C4, Xperia L2, Xperia XA Ultra, Xperia XA1 Ultra, Xperia XA2 Ultra, and Xperia XZ Premium
|
54.98 |
|