|
D Size 2.25" Ball on Round Plate with AMPS Hole Pattern
The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball "D" Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.6 lbs.
|
23.06 |
|
|
24" No-Drill™ Vehicle Mount with B Size 1" Ball on Round Plate with AMPs Hole
The RAM-B-316-1-24-202U is a universal base from RAM that allows you to mount a light to medium weight item such as tablets, in a car safely and securely. No drilling required!
Installation Instructions:
At right angles to the base of the 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the rigid aluminum rod.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
1.7 lbs.
|
40.34 |
|
|
Forklift Overhead Guard Plate with D Size 2.25" Ball
Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications.
Features:
Hole Patterns:
AMPS 4-Hole Pattern
100 x 100 VESA Pattern
75 x 75 VESA Pattern
Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided.
Material: Powder Coated Marine Grade Aluminum
Weight: 8.6 lbs.
|
111.41 |
|
|
D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench
The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Weight:
3.45 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Hi-Torq™ Wrench
The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
|
144.56 |
|
|
2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball
The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.56 |
|
|
D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm.
Weight Capacity:
Up to 15 lbs.
Ball Size:
2.25" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
3.95 lbs.
|
124.86 |
|
|
D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 3.0 lbs.
|
98.20 |
|
|
50mm x 100mm Half VESA Plate Adapter with D Size 2.25" Ball
The RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.8 lbs.
|
33.00 |
|
|
Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter
The RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in diameter.
HARDWARE INCLUDED
(2) 1/4"-20 U-Bolts for 1" - 1.25" Rails
(4) 1/4"-20 Nylock Nuts
(4) Rubber Caps
CLAMP RANGE
1" - 1.25" diameter
BALL SIZE
D Size (2.25")
WEIGHT CAPACITY
Standard Use: 6 lbs
Heavy-Duty Use: 5 lbs
Note:
The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight:
0.86 lbs
|
35.60 |
|
|
Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter
The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" D-Size Ball
Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.
Weight: 0.54 lbs.
|
33.78 |
|
|
RAM® Large Round Plate with 6-Hole Pattern & Ball
The RAM-D-202U-SYM1 consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base. There are 6 pre-drilled holes in the base.
Features:
Plate Size - 2.5" Diameter
Ball/Socket Size - D Size (2.25")
Materials - Marine-grade aluminum
|
34.20 |
|
|
RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern
The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
41.11 |
|
|
RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole Pattern
The RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
64.50 |
|
|
Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole Pattern
The RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. Designed into the mount is a 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Dimensions:
Overall Length: 3"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.24 lbs.
|
12.62 |
|
|
RAM 2" x 1.7" Base w/AMPs Hole Pattern
The powder coated marine grade aluminum base consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal AMPs hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
11.59 |
|