EZ-Roll’r™ Locking Cradle for the Garmin Fleet 770, 780 & 790 The EZ-Roll’r™ cradle for the Garmin Fleet 770/780/790 provides a secure fit with quick and easy one-handed attachment and removal of the device from the cradle. With the included cradle lock as a theft deterrent, keep the Garmin Fleet protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Locking Case Features: Open access to all electronic ports including speaker and microphone High strength materials ensure product longevity Form fitted cradle supports and protects device without vibration Locks device in place so it cannot be removed without the use of tools Lifetime warranty Made in the U.S.A. Material: High Strength Composite

RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700 The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.   Features: Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible Locks the device in place so it cannot be removed without the use of tools Made of high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Hardware Included: Assembly Hardware (2) #8-32 x 5/8" Machine Screws (2) #8-32 Nylock Nuts (2) 4" Cable Ties Specifications: Hole Pattern: 2-Hole AMPS: 1.912" Materials: High Strength Composite Weight: 0.35lbs

Locking EZ-ROLL'R™ Cradle for the Garmin nuviCam and dezlCam The Garmin nuviCam™ & dezlCam™ keeps an extra eye on the road. And RAM Mounts custom cradle for these innovative devices keeps traffic information in your line of sight and keeps the device secure in your vehicle. The cradle allows for full range of motion of the device camera and integrates the factory Garmin magnetic dock for access to charging. The high-strength composite mount integrates a cable retention system to prevent accidental unplugging. The custom-fit cradle also has a locking option that is installed using press-fit nuts to enhance security. The cradle has two location options to attach the RAM ball (comes with 1" B-Size ball). Compatible Devices: Garmin nuviCam™ LMTHD Garmin dezlCam™ LMTHD Features: Open access to all electronic ports including speaker, microphone, SD and mUSB slots Allows for full range of motion for the camera Roller design for super smooth placement and removal of the GPS High strength materials ensure product longevity Form fitted cradle supports and protects device without vibration Cradle integrates the factory Garmin magnetic dock Comes with B sized, 1" ball Locking attachment allows for a low profile theft deterrent Lifetime warranty Made in the U.S.A Material: High Strength Composite

Locking Case f/Garmin dezl™ 770LMTHD The RAM-HOL-GA70LU is a high-strength composite locking case for the Garmin dezl 770LMTHD. RAM has designed a form-fit cradle that supports the device and protects it from vibration. We have also molded in a sun visor to shield the screen and the diamond hole pattern allows the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. Locking Case Features: Open access to all electronic ports including speaker, microphone, and SD slots High strength materials ensure product longevity Form fitted cradle supports and protects device without vibration Built in visor prevents glare on screen Integrates the factory Garmin magnetic dock for charging Locks device in place so it cannot be removed without the use of tools Lifetime warranty Made in the U.S.A. Specifications: Material: High Strength Composite The "U" in the part number reflects product packaged in poly bag. Weight: 0.55 lbs.

RAM Suction Cup Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Suction Cup Mount Features: Double socket arm, 3.25" suction cup twist lock base and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks.

RAM Yoke Clamp Mount w/iPad mini EZ-ROLL'R Cradle The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite Yoke Clamp Mount Features: Consists of a double socket arm, round 2.5" base that contains the universal AMPs hole pattern and yoke clamp base. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products.

RAM® EZ-Roll'r™ Powered Dock for Samsung Tab Active 2 & 3 This powered cradle for the Samsung Tab Active3 and Tab Active2 has been designed to meet the demands of field workers in a variety of applications including transportation, field sales, logistics, manufacturing, and much more. Power capabilities are provided to the device through pogo pins, and you can easily rotate the device for use in portrait or landscape mode. This cradle is also compatible with the RAM® Skin™ or factory device skin, as well as GDS® Hand-Stand™ and shoulder strap accessories. Access to the stylus remains while the device is docked. Included is a set of four nuts and bolts to connect the cradle to any RAM® components containing the universal AMPS hole pattern. Also included is the mUSB female pigtail, GDS® USB 2.0 cable, cable clamp, and zip ties.  Features: RAM® EZ-Roll'r™ Powered form-fit cradle provides charging capabilities for the Samsung Galaxy Tab Active3 and Tab Active2 through an integrated pogo pin connector and mUSB cable Compatible with the Samsung OEM skin as well as the RAM® Skin™; the built-in cavity in the back allows for GDS® Hand-Stand™ compatibility Access to speakers, mics, and headphone jack remains while the device is docked; allows access to the GDS® shoulder strap loops on RAM® Skin™ Backed by a 3-year warranty Specifications: Product Dimensions(inch): Width: 9.24"; Height: 6.34"; Depth: 2.57" Hole Pattern: 4-Hole AMPS: (inch) 1.181" x 1.496" Materials: High-strength composite Packaging Type: Polybag Input Voltage: 4.4VDC - 5.4VDC (USB power source dependent) Output Voltage: 4.4VDC - 5.4VDC (USB power source dependent) Input Connector: mUSB Female Warranty: 3-year warranty Weight (lbs): 0.71 lb. Hardware Included: (4) #8-32 x 5/8" Machine Screws (4) #8-32 Nylock Nuts (1) GDS® Genuine USB 2.0 Straight Cable (1) Optional Cable Clamp Housing (2) Large Cable Ties (5) Small Cable Ties *Look to the RAM-GDS-CHARGE-V7BU hardwire charger or the RAM-GDS-CHARGE-USB2QCCIG cigarette vehicle charger for supplying power

RAM® EZ-Roll'r™ Powered Dock for Kyocera DuraForce Ultra 5G E7110 This form-fit dock is designed specifically for the Kyocera DuraForce Ultra 5G E7110, providing a perfect fit for a device without a case or sleeve. The dock supplies power to the device through integrated pogo pins while the device is docked and retains access to the audio port for the device's PTT functionality. For attaching to a huge range of RAM® arms and mounting accessories, the dock is RAM® Mounts Compatible™ with RAM® B and C size diamond ball bases. Features: Form-fit powered vehicle dock for the Kyocera DuraForce Ultra 5G E7110 provides a perfect fit for your device without a case or sleeve; access to the audio port is available When connected to a power source, integrated pogo pins provide power to the device while docked Compatible with B and C size RAM® diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a 3-year warranty Specifications: Hardware Included: (2) #8-32 x 1/2" Machine Screws, (2) #8-32 x 5/8" Machine Screws, (2) #8-32 x 3/4" Machine Screws, and (2) #8-32 Nylock Nuts Hole Pattern (inch): 2-Hole AMPS: 1.912" Materials: High-strength composite Input Connector: USB Type A Male Output Cable Length: 1.25 meters Packaging Type: Polybag Weight: 0.45 lb. Compatibility: Kyocera: DuraForce Ultra 5G E7110

RAM EZ-ROLL'R Cradle f/Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE The EZ-ROLL'R consists of a high strength composite cradle and patent pending roller design. The patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle. The EZ-ROLL'R cradle is compatible with the following tablets: Apple iPad mini WITHOUT CASE, SKIN OR SLEEVE Specifications: Docking Cradle: No Locking Cradle: No Fits Tablets WITH Cases: No Fits Tablets WITHOUT Cases: Yes Low Vibration Environment: Yes High Vibration Environment: Yes Cradle Features: 1. Compatible with various iPad cable/docking accessories 2. Patent pending roller design for super smooth placement and removal of the iPad 3. High strength materials maximize longevity of cradle 4. Full access to all ports 5. Lifetime warranty Material: High Strength Composite

EZ-Roll'r™ Holder for Phones with OtterBox uniVERSE Mount your OtterBox uniVERSE-protected iPhone or Samsung Galaxy wherever you need to with this RAM® EZ-Roll'r™. This mount is compatible with any OtterBox uniVERSE phone case–simply pair a B-size arm and base for your intended use case, and you have a vibration-reducing ball and socket mounting system that allows for near-infinite adjustability. Features: RAM® EZ-Roll'r™ cradle designed for phones in an OtterBox uniVERSE case Pair with any B-size arm and base; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Ball Size: B Size (1 in.) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: High-strength composite Weight: 0.21 lb. Compatible Devices: OtterBox: uniVERSE Cases - All Phone Models

EZ-Roll'r™ Cradle with Ball for Apple iPad mini 1-3 The RAM-B-202-AP14U consists of a 2.5" round base adapter, with 1" ball, attached to a high strength composite cradle. The cradle includes a patent pending roller design allows for smooth placement and removal of the iPad, while keeping it secure while on the go. Compatible and interchangeable with a wide range of popular RAM Mounting products, this cradle is ready to compliment your iPad and become the most useful accessory in your vehicle.  Features: Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.4 lbs.

EZ-Roll'r Cradle for Apple iPad Pro 12.9" 3rd Gen  The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: 1. Compatible with various iPad cable/docking accessories 2. Roller design for super smooth placement and removal of the iPad Pro 3. High strength materials maximize longevity of cradle 4. Full access to all ports and buttons 5. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

EZ-Roll'r™ Cradle for SPOT X™ The form-fitting, high-strength composite RAM® EZ-Roll’r™ cradle for the SPOT X™ allows for the attachment of RAM® components containing the universal AMPS hole pattern. With the device in the cradle, all buttons and the power port remain fully accessible. The RAM® EZ-Roll’r™ cradle for the SPOT X™ is compatible and interchangeable with a wide range of RAM® diamond ball bases. Included is a set of two nuts and bolts.  Features: Open access to all electronic ports Patented roller design for super smooth placement and removal of the SPOT X™ Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

EZ-Roll'r™ Cradle for Apple iPad Pro 11" The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.  Features: Compatible with various iPad cable/docking accessories Roller design for super smooth placement and removal of the iPad Pro High strength materials maximize longevity of cradle Full access to all ports and buttons Lifetime warranty Specifications: Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag

RAM® EZ-Roll'r™ Cradle for Apple iPad mini 6 The RAM® EZ-Roll’r™ cradle for the iPad mini 6 secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure it into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™ cradle also features two attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil. Features: Form-fit cradle for iPad mini 6 provides a perfect fit for your device without a case Compatible with B and C size RAM® round ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Lifetime warranty Specifications: Hardware Included: (4) #8-32 x 5/8" Machine Screws, (4) #8-32 Nylock Nuts  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" Materials: High strength composite Weight: 0.25lbs