B Size 1" Fishfinder Ball Adapter for the Lowrance Hook2 Series Designed for light duty use, this B size (1”) ball base kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect to a variety of compatible RAM mounting solutions. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM® D Size Souble Ball Adapter The RAM-D-230U is a 2.25" double ball connector, allowing you to connect two socket arms together and maintain a flexible mount.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: D Size 2.25" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.83 lbs.

RAM Double 1-1/2" Ball Adapter Part #: RAM-230U The RAM double socket connector allows you to connect two socket arms together and maintain a flexible mount. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Diameter Ball with Custom GoPro Hero Adapter GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO". The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket. Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera Mount to many RAM double socket arms and mounts Multiple articulation and adjustment points for perfect viewing angles Lifetime warranty Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Pin-Lock™ Security Kit and 2.25" Diameter Ball SHORT Mount with 11" X 3" Rectangle Plate The RAM-S-D-111U-C consists of a 3.68" diameter round base, SHORT LENGTH double socket arm, 11" x 3" rectangular base, RAM mixed combination Pin-Lock™ security nut and key knob. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. Features Overall Height: 8.125" Weight Capacity: Up to 15 lbs Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 2.25" Rubber "D" Ball Size Note: The 11" x 3" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM® Double Ball Mount with 1/4"-20 Male Thread - Short Arm The RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder base. The universal camera/camcorder base consists of a 1" diameter rubber ball connected to a 2.5" diameter round base with 1/4-20 camera thread. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles.  Hole Pattern: 4-Hole AMPS: 1.181" x 1.496" 3-Hole 120-Degree: 1.812" Diameter Features: Ball/Socket Size: B Size - 1" Materials: Marine-grade aluminum Plate Size: 2.5" Diameter Socket to Socket Length: 3" Product Dimensions: Overall Height: 5"

Ram Rod 2000 Rail Mount Adapter Kit Material: High Strength Plastic Color: Black

Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern) Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1" Ball Adapter for GoPro® Bases with Short Arm and Action Camera Adapter For anyone who needs more versatility from their GoPro® mounting solution, look no further than the RAM Adapter for GoPro Bases. Utilizing the RAM ball and socket mounting system, simply attach the included B Size 1” ball to the base for enhanced adaptability and superior vibration dampening – letting you get the most out of your GoPro. This kit includes a short arm and two-pronged universal action camera for even greater versatility, allowing for an easily adjustable 360-degree rotation of your camera.  Features: Patented rubber ball design dampens shock and vibration helping to extend the life of your camera. 360-degree rotation of your action camera. Compatible with any action camera with univeral mounting hinge. Lifetime warranty. Made in the U.S.A. Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in a poly bag

D Size 2.25" Ball on Round Plate with AMPS Hole Pattern The RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.6 lbs.

RAM-ROD 1.5" Diameter Ball & Hardware f/RAM 5 Spot Mounting Base Color: Black Material: High Strength Composite

RAM 2-7/16" X 1-5/16" Base w/Ball Part #: RAM-238U The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Cell Phone Mounts from the Ram Mount Store  

IPad/IPhone/IPod Mounts from our Ram Mount Store