Level Cup™ XL w/Long Double Socket Arm Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup XL keeps your drink upright, regardless of the conditions. This kit includes a long arm that can accommodate any B-size mounting base. This gives you the flexibility to put your cup anywhere you need it. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

RAM Twist Lock Suction Cup Mount with Long Double Socket Arm and Diamond Adapter The RAM-B-166U-C consists of a 3.25" suction cup locking base, LONG double socket arm and diamond base end. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

Universal Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-C-UN7U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" X-Grip® Cradle Dimensions Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Specifications/Features: Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends adding a secondary tethering device for all open cockpit applications while using this product.

Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® IV f/Large Phone/Phablet Cradle The RAM-B-400-C-UN1 consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 5" large phones and phablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 5" phone or phablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" X-Grip® Cradle Dimensions Minimum Width = 1.75" Maximum Width = 4.5" Depth = 0.875" Specifications/Features: Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends adding a secondary tethering device for all open cockpit applications while using this product. Weight: 1.0 lbs.

RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length) The RAM-B-101U-C consists of a long double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Overall Height: 7.3125" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Tough-Claw™ Base w/Long Double Socket Arm & Universal X-Grip® Cradle w/1" Ball f/7" Tablets The RAM-B-400-C-UN8U consists of the Tough-Claw™ rail clamp base, LONG length double socket arm and universal spring loaded X-Grip® cradle for 7" tablets. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" X-Grip® Cradle Dimensions Minimum Width = 2.25" Maximum Width = 5.75" Depth = 0.875" Specifications/Features: Rustproof Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: RAM Highly Recommends adding a secondary tethering device for all open cockpit applications while using this product. The "U" in the part number reflects product packaged in poly bag.

1" Diameter Ball Mount w/Long Double Socket Arm, 6.25" x 2" Rectangle Base & 2.5" Round Base (AMPS Pattern) The RAM-B-111U-C consists of a long double socket arm, 2.5" diameter round base and 6.25" x 2" rectangle base. The round base contains pre-drilled holes, including the universal AMPS hole pattern. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

Twist Lock Suction Cup Mount with Long Double Socket Arm & 2.5" Round Base - AMPS Hole Pattern (9" Length) The RAM-B-166-C-202U consists of a 3.3" suction cup twist lock base, long double socket arm and round base that contains the universal AMPs hole pattern. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to most RAM cradles and 3rd party cradles. Overall Length: 9" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.

RAM 1.5" Diameter Ball Mount with Long Double Socket Arm & 2 2.5" Round Bases w/AMPs Hole Pattern The RAM-101U-D consists of a long double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-101U-D-2461 consists of a LONG double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 3.625" square plate with the VESA hole pattern. The VESA plate contains a 75mm X 75mm hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Seat Tough-Wedge with 1" Ball Long Double Socket Arm, 2.5" Round Base & Diamond Base The RAM-B-407-C-202U consists of the Tough-Wedge™ 1" ball diamond base, long double socket arm and round base. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The long length double socket arm measures 6" and will connect to all RAM cradles/adapters with a 1" ball. The 2.5" round base contains the universal AMPs hole pattern. Tough-Wedge™ Dimensions: Length: 13.25" Height: 8.25" Depth: 1" Inside Wedge Depth: 0.375" - 0.875"

The RAM-D-201U-E powder coated marine grade aluminum LONG double socket arm allows for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 12.875" Socket-To-Socket Length: 11.1875" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size Note: The "U" in the part number reflects product packaged in poly bag.

Level Cup™ XL w/Single Socket for B Size 1" Ball Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL that has an integrated single-socket arm. This cup holder can attach to any B-size base or RAM® Mounts B-size ball accessory. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.  Koozie included with purchase of this product.  Common Beverage Sizes: 12oz Cans Water Bottles Insulated Cups 32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask) Material: High Strength Composite   Ball Size: 1" Rubber Ball "B" Size   Note: The "U" in the part number reflects product packaged in poly bag Compatible Dimensions: Width Range: 2.6" - 3.5" Height Range: 3.75" - 11"

RAM 1" Diameter Ball Long Double Socket Arm with Diamond Base. Overall Length: 6.62" The RAM-B-103-C-238U consists of a diamond base and LONG double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position. Dimensions: Overall Length: 6.62" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Long Double Socket Arm for 1.5" Ball Bases The RAM-201U-D, LONG double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 9.125" Socket-To-Socket Length: 8.75" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size