RAM Universal Drill-Down Laptop Mount Swing Arm Connects to 2.5" Diameter Ball Base. Ball Size: 1.5" Rubber Ball Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display

BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP BURKS Model: GNB6-1-1/2-6.25 Burks Frame Mounted End Suction GNB Series Pump Bronze Fitted, 6.25" Bronze Impeller 2" Suction & 1 1/2" Discharge Carbon / Ceramic / SS Buna-N Shaft Seal Maximum Temperature of 225°F (107°C) Application: Waste Treatment and Plating   Ships Via Truck please us the Contact Us page to get a Freight Quote.

RAM Swing Arm w/Single Socket Pedestal Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5 inch Rubber Ball Color: Black Powder Coat

Ram Mount Swing Arms for all Mounts  

Universal Floor Mount The Universal Floor Mount is the ideal solution for mounting your Universal Laptop Mount when the under-seat bolts are not accessible. Featuring the same easy-on/easy-off design, the black powder-coated Universal Floor Mount can be mounted anywhere using the six (6) included sheet-metal screws. Features: Strong Sturdy Base Allows Mounting On Vehicle Floor Sheet Metal Screws Included One Year Warranty

Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting Base The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation. Max Weight Capacity: 10 lbs. Dimensions:  Center of knob to center of ball socket: 6" Overall length of swing arm assembly: 11.4375" Overall height: 8.45" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM Mount w/3" x 11" Base & Short Arms Part #: RAM-E-111U-D The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device. Material: Powder Coated Marine Grade Aluminum Color: Black Powder Coat Ball Size: 3.38" Rubber Ball

Groco K-3-P Monel Pin, .25 X 2.75  

{Standard Start-Up Kit - No Adhesive The 65109 Start Up Kit has a wide variety of Weld Mount parts designed to give the user the chance to try numerous applications at a low cost. Kit Contains: 1 pc AT-300 Adhesive Dispensing Gun 5 pc. AT-850 Adhesive Mixing Tips 50 pc. AT-5 White Tie Mount 2 pc. AT-113 Blarge Black Footman's Strap 4 pc. ST125-1420-12SS 1.00" Stainless Stud 1 Plano Storage Box 11" x 7.25" x 2.75"

Fill-Rite 901-1 1/2 Flow Meter   Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports

BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet features a voltage rating of 230/460 VAC 6.06 in impeller Bronze fitted   UNSPSC Code: 40150000

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 5.0625" Socket-To-Socket Length: 3.1875" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

B45 Standard Low-Speed Fairing Block Airmar's Standard Low-Speed Fairing Block for B45.  Specifications: Dimensions: 4.25” x 2.37” x 1.87” This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.