RAM Universal Drill-Down Laptop Mount Swing Arm Connects to 2.5" Diameter Ball Base. Ball Size: 1.5" Rubber Ball Color: Black Powder Coat Material: Powder Coated Marine Grade Aluminum

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles. Dimensions: Overall Length: 5.0625" Socket-To-Socket Length: 3.1875" Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball "D" Size

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display

BURKS GNB6-1-1/2-6.25 CENTRIFUGAL PUMP BURKS Model: GNB6-1-1/2-6.25 Burks Frame Mounted End Suction GNB Series Pump Bronze Fitted, 6.25" Bronze Impeller 2" Suction & 1 1/2" Discharge Carbon / Ceramic / SS Buna-N Shaft Seal Maximum Temperature of 225°F (107°C) Application: Waste Treatment and Plating   Ships Via Truck please us the Contact Us page to get a Freight Quote.

Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting Base The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation. Dimensions:  Overall length: 16.69" Overall height: 8.577" Height from bottom of base to top of knob: 4.89" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag

Universal Floor Mount The Universal Floor Mount is the ideal solution for mounting your Universal Laptop Mount when the under-seat bolts are not accessible. Featuring the same easy-on/easy-off design, the black powder-coated Universal Floor Mount can be mounted anywhere using the six (6) included sheet-metal screws. Features: Strong Sturdy Base Allows Mounting On Vehicle Floor Sheet Metal Screws Included One Year Warranty

Ram Mount Swing Arms for all Mounts  

Gianneschi SUPER LARIO 2 Bronze Hand Pump 1" Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.

Groco K-3-P Monel Pin, .25 X 2.75  

{Standard Start-Up Kit - No Adhesive The 65109 Start Up Kit has a wide variety of Weld Mount parts designed to give the user the chance to try numerous applications at a low cost. Kit Contains: 1 pc AT-300 Adhesive Dispensing Gun 5 pc. AT-850 Adhesive Mixing Tips 50 pc. AT-5 White Tie Mount 2 pc. AT-113 Blarge Black Footman's Strap 4 pc. ST125-1420-12SS 1.00" Stainless Stud 1 Plano Storage Box 11" x 7.25" x 2.75"

Circular Baseplate for Horizontal Mount Lights - Aluminum - Silver Replacement aluminum base for horizontal lights. Compatible with: Lopolight horizontal mounted lights Features: Aluminum  Weight - 11.99oz In the Box: Baseplate Mounting hardware Instruction manual *Sold as an Individual

Circular Baseplate for Horizontal Mount Lights - Aluminum - Black Replacement aluminum base for horizontal lights. Compatible with: Lopolight horizontal mounted lights Features: Aluminum  Weight - 11.99oz In the Box: Baseplate Mounting hardware Instruction manual *Sold as an Individual

Fill-Rite 901-1 1/2 Flow Meter   Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports

BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet features a voltage rating of 230/460 VAC 6.06 in impeller Bronze fitted   UNSPSC Code: 40150000

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim