|
RAM Seat Tough-Wedge with 1" Ball Base & Standard Length Double Socket Arm
The RAM-B-407-201U consists of the Tough-Wedge™ and standard length double socket arm. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The standard length double socket arm measures 3.68" and will connect to all RAM cradles/adapters with a 1" ball.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
63.47 |
|
|
Ram Seat Tough-Wedge with 1" Ball Base & Long Length Double Socket Arm
The RAM-B-407-201U-C consists of the Tough-Wedge™ and long length double socket arm. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The long length double socket arm measures 6" and will connect to all RAM cradles/adapters with a 1" ball.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
70.58 |
|
|
1" Ball Standard Length Double Socket Arm w/Medium Tough-Claw™ Base
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
42.23 |
|
|
RAM 1" Diameter Ball Standard Length Double Socket Arm with 3.25" Diameter Suction Cup Twist Lock Base
The RAM-B-166-103U consists of a 3.25" suction cup twist lock base, 1" ball diamond base and standard length double socket arm. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The socket arm is compatible with all 1" ball bases and adapters.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.
|
29.69 |
|
|
Strap Clamp Roll Bar Mount w/Standard Length Double Socket Arm & 2.5" Round Base with 1/4"-20 Male Threaded Post
The RAM-B-149Z-2-202AU consists of a steel strap base, u-bolt bases, double socket arm and 2.5" dia. round base with 1/4"-20 threaded post. Designed for a clean installation, the included roll bar base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
43.80 |
|
|
Universal X-Grip® Cradle with 1" Ball & STANDARD Length Double Socket Arm for 7" Tablets
Consists of a STANDARD length double socket arm and universal X-Grip® clamping cradle for 7" tablets. The double socket arm is 3.69" in length and will accept all RAM 1" diameter ball bases. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your 7" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Cradle Dimensions
Minimum Width = 2.5" (Minimum Height = 7")
Maximum Width = 5.75" (Minimum Height = 4")
Depth = 0.875"
Specs & Features
Spring loaded cradle expands and contracts for perfect fit of your tablet
Rubber coated tips will hold your tablet firm and stable
Socket technology allows for multiple adjustment angles and articulation of your tablet
Easy access grip knobs, located on the back of the cradle for quick release of your tablet
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Rustproof
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.5 lbs.
Compatible Devices:
7" Screen Tablets
Amazon Kindle Fire
Amazon Kindle Fire HD
Amazon Kindle Fire HDX
Apple iPad mini
Apple iPad mini 2
Apple iPad mini 3
Apple iPad mini 4
Nexus 7
Samsung Galaxy Tab 2 7.0
Samsung Galaxy Tab 3 7.0
Samsung Galaxy Tab 4 7.0
Samsung Galaxy Tab A 8.0
Samsung Galaxy Tab S2 8.0
Samsung Galaxy Tab S 8.4
|
50.02 |
|
|
RAM Seat Tough-Wedge with 1" Ball Long Double Socket Arm, 2.5" Round Base & Diamond Base
The RAM-B-407-C-202U consists of the Tough-Wedge™ 1" ball diamond base, long double socket arm and round base. The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. The The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm. The long length double socket arm measures 6" and will connect to all RAM cradles/adapters with a 1" ball. The 2.5" round base contains the universal AMPs hole pattern.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
77.66 |
|
|
RAM Seat Tough-Wedge Accessory with 1" Ball Base
The Tough-Wedge™ is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge™ can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge™ in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge™ to the mount.
The 1" diamond ball base is compatible with all RAM-B size single and double socket arms.
Tough-Wedge™ Dimensions:
Length: 13.25"
Height: 8.25"
Depth: 1"
Inside Wedge Depth: 0.375" - 0.875"
|
50.84 |
|
|
Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle
The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Features:
Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5"
Clamping Range (Flat Surfaces): 0" to 1.14"
Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875"
Rustproof
High strength composite and stainless steel construction
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Includes Tether for open cockpit and extreme environments
Lifetime warranty
Made in U.S.A.
Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product.
Weight: 0.95 lbs.
|
71.12 |
|
|
D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm.
Weight Capacity:
Up to 15 lbs.
Ball Size:
2.25" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
3.95 lbs.
|
124.86 |
|
|
Small Tough-Claw™ Base w/1" Ball & M6 x 30 SS Hex Head Bolt f/Raymarine Dragonfly-4/5 & WiFish
The RAM-B-400-379-M616U consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
The RAM-B-400-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Specifications/Features:
Rustproof
Spring loaded cradle expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.
|
48.68 |
|
|
Suction Cup Mount w/1" Ball, including M6 X 30 SS HEX Head Bolt, f/Raymarine Dragonfly-4/5 & WiFish Devices
The RAM-B-224-1-379-M616U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and 1" diameter ball, containing a M6 x 30 SS HEX head bolt. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces.
The RAM-B-224-1-379-M616U reduces the mounting footprint, compared to old dragonfly units that contain a large neck. This mount allows for a seamless marriage of RAM components into your Raymarine system, opening up the ball and socket system and all of our mounting options to you.
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. Raymarine device not included with purchase.
|
35.52 |
|
|
D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 3.0 lbs.
|
98.20 |
|
|
RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ Base
The RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected to the base is a standard length double socket arm and 6.25" x 2" rectangle plate for supporting a wide range of fishfinders and chartplotters. The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear polybag for store shelf display. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
51.59 |
|
|
RAM 1" Diameter Ball Standard Length Double Socket Arm with Small Tough-Claw™ Base
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Features:
1. High strength glass filled nylon construction with corrosion resistant stainless steel hardware
2. Rubber pads provide stable, even gripping and protection of mounting surface
3. Clamp jaw is configured for round, flat and odd shapes
4. Quick installation and removal of Tough-Claw™
5. Lifetime Warranty!
6. Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
|
37.43 |
|