|
No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015
Specifications/Features
Compatible Vehicles:
Dodge RAM 1500-5500 (2008-2015)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
2.1 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO
|
97.58 |
|
|
No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More
Compatible Vehicles:
Ford
Transit Connect (2010-2013)
Transit Connect Wagon Premiun (2013)
Transit Connect XL Van (2013)
Transit Connect XLT Van (2013)
Transit Connect XLT Wagon (2013)
Dodge
Grand Caravan (2008-2009 2012-2016)
Grand Caravan AVP (2013)
Grand Caravan Crew (2013)
Grand Caravan RT (2013)
Grand Caravan SE (2013)
Grand Caravan SXT (2013)
RAM C/V Tradesman Van (2014-2015)
Chrysler
Town & Country (2008-2009 2012-2016)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.5 lbs.
Material:
Powder Coated Steel
|
47.48 |
|
|
No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
Ford
Edge (2007-2013)
Edge Limited (2013)
Edge SE (2013)
Edge SEL (2013)
Edge Sport (2013)
Fiesta (2015)
Fusion (2013-2021)
Placement of Mount:
Passenger side on the floor, under front seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
Powder Coated Steel
Weight:
6 lbs.
Features:
Quick installation with no drilling needed
|
54.68 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
No-Drill™ Laptop Base f/'17-20 Ford F-Series + More
The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
Compatible Vehicles:
Dodge
Journey (2011-2018)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2019)
Transit Connect (2014-2020)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2018)
Patriot (2013-2017)
|
45.01 |
|
|
RAM® No-Drill™ Vehicle Base for '19 Chevy Silverado 1500 & GMC 1500
The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Chevrolet All-New Silverado and GMC Next Generation Sierra perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchase Separately
Material: Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
|
52.14 |
|
|
No-Drill Laptop Base for the Dodge Challenger, Charger, Magnum, Sprinter Van, Freightliner Sprinter Van & Mercedes Sprinter Van
Compatible Vehicles:
Chrysler
300 (2011-2021)
Dodge
Challenger (2011)
Charger (2005, 2011-2021)
Charger Police Package (2005, 2011-2021)
Magnum (2005)
Magnum Police Package (2005)
Sprinter Van (2007-2011)
Freightliner
Sprinter Van (2010-2020)
Mercedes
Metris (2016-2021)
Sprinter Van (2010-2019)
Ram
Promaster (2014-2021)
Promaster
City (2014-2020)
Placement of Mount:
Passenger side on the floor, in front of seat
Drilling Requirements:
No - uses existing seat bolts
Seat Configuration:
Bucket
Pole:
Purchased Separately
Weight:
4.9 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.
|
63.79 |
|
|
RAM® No-Drill™ Vehicle Base for '20-22 Ford Police Interceptor Utility
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base with a universal design to fit the 2020-2022 Ford Police Interceptor Utility. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution.
Features:
RAM® No-Drill™ base offers low-profile mounting; designed specifically for the 2020-2022 Ford Police Interceptor Utility
Compatible with RAM® Tele-Pole™ mounting systems
Requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts
Made of powder-coated steel
Backed by a lifetime warranty
Specifications:
Hardware Included: Foot Stabilizer
Hole Pattern: Seat Bolt Distance 12" Center to Center
Materials: Powder Coated Steel
|
40.13 |
|
|
No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Features:
Material: Powder Coated Steel
Placement of Mount: Passenger side on the floor, under front seat
Drilling Requirements: None - attaches to seat bolts
Seat Configuration: Bucket
Pole: Purchased Separately
Weight: 9.0 lbs.
Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.
|
108.56 |
|
|
RAM® No-Drill™ Vehicle Base for '20-21 Ford Explorer
RAM® No-Drill™ mounting base for the 2020 Ford Explorer offers low-profile mounting; telescoping pole allows for height adjustments. The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2020-2021 Ford Ranger perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Features:
Made of powder-coated steel
Backed by a lifetime warranty
Hardware Included:
Foot Stabilizer
(2) M10-1.5 x 75mm Hex Bolts
(2) 1.68" Stand-Offs
(2) 3/8" Fender Washers
|
54.61 |
|
|
No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Compatible Vehicles:
F-250 (1997-2016)
F-350 (1997-2016)
F-450 (1997-2016)
F-550 (1997-2016)
F-650 (1997-2018)
F-750 (1997-2018)
Excursion (2000-2005)
Placement of Mount:
Passenger side floor board, in front of seat
DRILLING REQUIREMENTS:
No - attaches to seat studs
Seat Configuration:
Bucket
Pole:
Purchased Separately
Material:
Powder Coated Steel
|
86.82 |
|
|
No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
Placement of Mount:
Passenger side floor board, in front of seat
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Hole Pattern:
Seat Bolt Distance: 15"-15.5625" center to center
Pole:
Purchased Separately
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed. Rock solid construction with a lifetime warranty
Compatible Vehicles
Chevrolet
Avalanche (2007-2013)
Avalanche LS/LT/LTX (2009)
Silverado (2007-2013)
Silverado 1500 (2007-2013)
Silverado 1500 Hybrid (2008)
Silverado 1500HD (2008)
Silverado 2500HD (2007-2013)
Silverado 3500HD (2007-2013)
Suburban (2007-2014)
Suburban 12-Ton (2012)
Suburban 34-Ton (2012)
Tahoe (Front Bucket Seats Only) (2007-2014)
GMC
Sierra (2007-2013)
Sierra 1500 (2007-2013)
Sierra 1500 Denali (2012)
Sierra 1500 Hybrid (2008 2012)
Sierra 1500HD (2008)
Sierra 2500HD (2007-2014)
Sierra 2500HD Denali (2007-2012)
Sierra 3500HD (2007-2014)
Sierra 3500HD Denali (2007-2014)
Sierra Hybrid (2011)
Yukon (2007-2014)
Hummer
H2 (2003-2011)
|
118.24 |
|
|
Compatible Vehicles:
Dodge Avenger (2007-2010)
Dodge Caliber (2007-2009)
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Weight:
4.5 lbs.
Material:
Powder Coated Steel
Features:
Quick installation with no drilling needed.
|
54.12 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 Ford Ranger
The RAM® No-Drill™ laptop mounting base features a stabilizer foot and heavy-duty steel base custom-designed to fit the 2019 Ford Ranger perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Manufactured from high strength steel with a durable powder coat finish
If required, high quality fastening hardware is included
Mounts using existing seat bolts, no drilling required
|
54.61 |
|
|
RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm & 2/2.5" Round Bases (AMPs Hole Pattern)
The RAM-316-3-202U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm and two 2.5" round bases that contain the universal AMPs hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The universal AMPs hole pattern found on the round base adapter will connect to many RAM cradles.
Leg Lengths:
18", 20" and 30"
Installation Instructions:
At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
136.92 |
|