|
RAM STACK-N-STOW Bait Board
The RAP-395U includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With the universal AMPs hole pattern, located on the bottom of the board, easily integrate the bait board to your existing mount, or choose from an assortment of RAM compatible mounts. The bait board will also accomodate pipes and extension poles with a diameter of 1", and with a fish on the line, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
28.91 |
|
|
RAM STACK-N-STOW Bait Board w/18" Pipe, Post & Spline
The RAP-395-PSP-18U consists of the RAM STACK-N-STOW Bait Board and 18" long pipe with spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With spline post, located on the bottom of the 18" long pipe, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. With the 18" long pipe, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
35.64 |
|
|
RAM STACK-N-STOW Bait Board with 3" Post and Spline
The RAP-395-PU consists of the RAM STACK-N-STOW Bait Board and 3" long spline post. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. With the 3" long spline post, located on the bottom of the board, easily integrate it to your existing spline post base, or choose from an assortment of RAM compatible bases. The bait board will also accomodate pipes and extension poles with a diameter of 1", and with a fish on the line, quickly rotate the bait board away from the action. Tightening of the included knob will resecure the bait board.
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
31.27 |
|
|
RAM STACK-N-STOW Bait Board w/Combination Bulkhead Rail Adapter Kit
The RAP-395-RMU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and bulkhead rail adapter kit. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. This mount joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1".
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
45.07 |
|
|
RAM STACK-N-STOW Bait Board w/Combination Bulkhead/Flat Surface Base & Plunger
The RAP-395-BMPU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and combination bulkhead/flat surface mounting base. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. The mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. The bait board will also accomodate pipes and extension poles with a diameter of 1".
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
38.47 |
|
|
RAM STACK-N-STOW Topside Base w/1" Ball
The RAP-395W-BBU consists of a 1" ball, connected to a round base, that contains female grooves and hardware that will allow mounting to all RAM STACK-N-STOW Bait Boards.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
6.19 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
Bait Board
The Scotty Bait Board is the ultimate multi-purpose workspace for all your tool, tackle, and gear prep needs. Quickly mount the Bait Board to any of our post mounts, enabling storage for all of your fishing favorites with the built-in lure and accessory rack.
Quick and easy access to everything you need is now conveniently at your finger tips. Exterior tray walls let you cut bait and prep lures in a tidy, contained space. Keep knives, pliers, hook sharpeners and other sharp objects organized in between use for added safety.
You can easily customize your Bait Board to the right height and angle by attaching any Scotty adjustable extender, such as the 429 Gear Head Mount Extender. Mount the durable board to your kayak with our 453 Gimbal Mount Adapter.
The Bait Board comes with a universal post base, to fit any of our Rod Holder Mounts and Adapters.
So go ahead and speed through the prep work. Spend more time fighting the fish, and not the fishing gear!
( Extenders, Camera Mount, Fish Finder Mount, Cup Holder and accessories sold seperately.)
Board Dimensions: 9.5" x 12.25" x 1.75"
|
21.46 |
|
|
RAM® No-Drill™ Laptop Mount f/ '19-21 RAM 1500
This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Dodge RAM 1500 using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit. Laptop base will fit under seat air duct in vehicles that have that option.
Compatible Vehicles
RAM
1500 (2019-2021)
|
216.88 |
|
|
RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &
Toyota Tundra
This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.
The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens)
The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
Compatible Vehicles:
Nissan NV1500 (2011-2021)
Nissan NV2500 HD (2011-2020)
Nissan NV3500 HD (2011-2020)
Toyota Tundra (2007-2021)
Features:
Placement of Mount:
Passenger side, front, where seat rail frame attaches to floor board.
Drilling Requirements:
No - attaches to seat studs
Seat Configuration:
Bucket
Material:
High Strength Composite and Powder Coated Steel
Notes:
If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.
|
311.86 |
|
|
No-Drill™ Laptop Mount Vehicle System for '17-20 Ford F-Series + More
This RAM® No-Drill™ laptop stand system installs quickly and easily into a variety of Dodge, Ford, and Jeep vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Features:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration dampening
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
Compatible Devices
10" to 16" Wide Laptops & (17" Wide Screens)
Compatible Vehicles
Dodge
Journey (2011-2020)
Ford
F-150 (2015-2020)
F-250-F-550 (2017-2020)
Escape (2013-2019)
Expedition (2018-2021)
Transit Connect (2014-2021)
C-Max (2014-2018)
Focus (2011-2018)
Raptor (2015-2020)
Jeep
Compass (2013-2021)
Patriot (2013-2017)
|
214.90 |
|
|
RAM® No-Drill™ Laptop Mount for 2019 Ford Ranger
This RAM® No-Drill™ laptop stand system installs quickly and easily into the 2019 Ford Ranger using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12” to 18”. Dual swing arms provide articulation and 12” of reach for passenger and driver access to the mounted device. RAM® rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation.
The spring-loaded RAM® Tough-Tray™ laptop holder accommodates 10” to 16” wide laptops, and 17” wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM® Tough-Tray™. In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM® mounting solutions.
Specifications:
Placement of Mount: Passenger side, in front, where seat frame meets floor board
Drilling Requirements: No. Utilizes existing vehicle mounting points and hardware
Seat Configuration: Bucket
Material: High Strength Composite and Powder Coated Steel
Features:
Custom, No-Drill™ mounting base offers lowest profile in the industry
Ball and socket mounting system offers shock and vibration damping
Dual articulating swing arm offers the simplest and most comfortable adjustment points in the industry
Combination Telescoping pole adjusts both height and swing with one knob
Modular system makes changing your vehicle, or your device, simple and cost effective
Ability to mount laptops, tablets and other devices using the same mounting system
Universal Laptop Tray accommodates most laptops
|
224.50 |
|
|
PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 Gen2 Touch, HDS-9 Gen3 & HDS Carbon 9 - Carbon Black
PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy to reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions. This protection assures reliability and longevity of your marine electronics. PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution.
RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing. When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance. This will allow most boat covers to fit over the PedestalPod when not in use. Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers.
PedestalPods are waterproof housings for marine electronics specifically designed for bass boats. PedestalPods are better than bracket mounting. Very sturdy and secure, yet clean and attractive, this mount provides protection of your marine electronics from the harshest of wet boating conditions. PedestalPods provide the convenience of height for accessibility and added security with protection from theft.
PedestalPods position your fishfinder/chartplotter at 20” off the deck and located near the bow and at a 45-degree angle for ease of viewing while fishing. This allows the user to easily reach and access the fishfinder/chartplotter for changes to range, zoom or even control the trolling motor.
All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. They keep harsh spray off the electrical connections on the back of your fishfinder/chartplotter assuring reliability and longevity of your marine electronics.
Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PedestalPod. The heavy duty, black powder coated aluminum pedestal tube is 3” in diameter with a 5” round base and has a large 1.75” opening providing plenty of room for running wires and connectors internally for a very clean look. It provides protection for wires and connectors from water intrusion, UV exposure or damage from just getting kicked or snagged and ripped out of their sockets.
All NavPods come with a security wrench and nickel chrome-plated stainless steel tamperproof screws for protection from theft. PedestalPods are available pre-cut for 7”, 9” and 12” LCD displays from all major marine electronic manufacturers. Constructed out of durable ABS like all Gen3 NavPods, black carbon PedestalPods have the same high gloss finish with UV stability.
NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.
PedestalPods – Protection, Convenience, Security
|
366.53 |
|
|
RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to a 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
44.42 |
|
|
RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureScan LSS transducer, while protecting it from damage. Perfect for kayak applications, the included rigid mounting arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the transducer mount can quickly be moved to a different kayak with an existing 1" RAM ball. Add a RAM ball mount for the Lowrance HDS-7 Fishfinder, and you have a complete mounting solution for your next fishing adventure.
Compatible Transducers:
Lowrance StructureScan LSS-2
Lowrance StructureScan LSS-1
Features:
18" rigid aluminum rod can be bent to position your transducer to its optimum location
Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
High quality materials prevent corrosion
Compatible with the Yakattack 1" screw ball
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
51.71 |
|