1" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

1.5" Track Ball w/ T-Bolt Attachement Designed to accommodate all kayak tracks, as well as common track systems, engage and fasten this base to your existing track system or many other's including GearTrac, SlideTrax and the common T-Track. With a quick turn of the ball the base will slide along the track, giving you ultimate flexibility in repositioning your rod holder. A necessity for the all fishing enthusiasts, the RAM Track Base is certain to create more mounting options or access on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-Tracks Scotty Slide Track, Many More!

Fishfinder Mount for Lowrance Hook2 Series - 1" Track Mount Designed for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and base to virtually any track system including the RAM® Tough-Track™. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. T-Bolt Dimensions: .48" x .95" Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber Ball Size Note: Part number reflects product packaged in a retail bag store shelf display.

RAM 2" x 1.7" Base with AMPs and 1" Ball for the Garmin zumo, TomTom Rider & Urban Rider The RAM-B-347U base consists of a 1" diameter rubber ball connected at right angles to a 2" x 1.7" square base. The base has four pre-drilled holes at each corner, making the universal 1.5 x 1.188 (hole spacing) AMPS hole pattern. This adapter/base is designed to hold the following devices: Garmin zumo 400 Garmin zumo 450 Garmin zumo 500 Garmin zumo 550 Garmin zumo 660 TomTom Rider 2 TomTom Urban Rider Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball The RAM® Torque™ handlebar and rail mounting base has a 1" rubber ball and accommodates bars 3/4" to 1" in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter Specs & Features Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 0.32lbs

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM® Roller-Ball™ Paddle & Accessory Holder With the RAM® Roller-Ball™ Clip for Tracks, easily secure your net, paddle, gaff hooks, stakeout/push poles, or BogaGrip®. Its three-point security design means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter. Note: This product consists of one single RAM® Roller-Ball™ Clip. For larger paddles and heavy duty applications, a second RAM® Roller-Ball™ may be required. Specifications: Material: Rubber and High Strength Composite Note: Part number reflects product packaged in retail bag for store shelf display Weight: 0.3 lbs. T-Bolt Dimensions: .48" x .95"

2-Pack RAM® Roller-Ball™ Paddle & Accessory Holder With the 2-Pack RAM® Roller-Ball™ holder for tracks, easily secure your heavy-duty net, paddle, gaff hooks, stakeout / push poles, or BogaGrip®. Its three-point security design on each RAM® Roller-Ball™ means there are always three points of tension keeping your net, paddle or other items attached, while also ensuring quiet placement and removal. The T-Bolt adapter is compatible with the RAM® Tough-Track™ and most other kayak track systems, and holds paddles and poles 1” - 1 5/16” in diameter.  Specifications: Material: Rubber and High Strength Composite Note: Part number reflects product packaged in retail bag for store shelf display Weight: 0.5 lbs. T-Bolt Dimensions: .48" x .95"

RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ Base The RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected to the base is a standard length double socket arm and 6.25" x 2" rectangle plate for supporting a wide range of fishfinders and chartplotters. The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum and High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: Part number reflects product packaged in clear polybag for store shelf display. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM® Tough-Cleat™ for the Tough-Track™ Create an anchor tie-off point for your kayak with the RAM® Tough-Cleat™. While fishing on the river or lake, moving the Tough-Cleat to an ideal position is easy – simply loosen the knob and slide along your track mounting system. The Tough-Cleat features a T-Bolt attachment and is compatible with the RAM Tough-Track™.  Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. 

Adapt-A-Post™ Side Track Base The Adapt-A-Post™ Side Track Base consists of a t-bolt, ratchet tooth and groove composition and female post spline hole. With a turn of the knob you can quickly fasten, adjust or remove the base to your existing track system. The ratchet tooth and groove composition enables you to slide and relocate the mount along the track; it can also rotate 360 degrees around, parallel to the track. The female post spline hole is compatible with many RAM Rod/Tube holders, along with 3rd party holders. Pressing of the side button, located on the right side of the image, you can quickly engage or release your holder from the base. Features: Quick installation, removal and stowage Easily relocate side track base along track Installation at any point on the track Track bases can rotate 360 degrees while mounted to track Compatible Post/Spline rod holders and extensions High strength materials ensure product longevity Lifetime warranty Made in U.S.A. Material: High Strength Composite

RAM Pod I Universal No-Drill Vehicle Mount w/Netbook Tray Well thought out and compact designs are common place at RAM and our RAM Tough Tray II™ is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC's, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM. This kit includes the RAM-234-6 with the RAM POD I with a 1" diameter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt. Tough Tray II™ Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 11.12" Side Clamp Arm Height: 2.75" max Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

POD No-Drill™ Vehicle Mount with Netbook Tray & 1.5" Ball This kit includes the RAM-234-6 with the RAM POD I with a 1" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt. Tray Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 11.12" Side Clamp Arm Height: 2.75" max Features: Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag

RAM Universal X-Grip Cell Phone Holder w/1" Ball Part #: RAM-HOL-UN7BU Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

RAM Small Cable Manager for 1" & 1.5" Diameter Ball Bases The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage. Compatible RAM Mounts: Compatible with all 1" and 1.5" diameter ball bases that contain the universal AMPs hole pattern. Material: High Strength Composite and Glass Filled Nylon IMPORTANT: To prevent galling of threads during assembly, it is imperative that all threads are lubricated with oil prior to assembly. Note: The "U" in the part number reflects product packaged in poly bag. RAM ball base not included with purchase.