RAM 18" Long Extension Pole with 1" and 1.5" Single Open Sockets The RAP-CB-201-18U consists of a LONG extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction. Dimensions: Pole Length (Socket End to Socket End): 18" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 14" Long Extension Pole with 1" and 1.5" Single Open Sockets The RAP-CB-201-14U consists of a SHORT extension pole and 1" and 1.5" ball single open sockets. The socket ends can swivel 360 degrees; this allowing for you to rotate your camera adapter in any direction. Dimensions: Pole Length (Socket End to Socket End): 14" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 18" Long Extension Pole with (2 qty) 1" Diameter Ball Ends, and Double Socket Arm The RAP-BB-230-18-201U consists of a LONG extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions: Overall Length (Arm Socket to Ball End): 18" Pole Length (Ball End to Ball End): 16.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 12.75" Long Extension Pole with 2 1" Diameter Ball Ends The RAP-BB-230-14U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions: Pole Length (Ball End to Ball End): 12.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 14" Long Extension Pole with 2 1" Diameter Ball Ends, and Double Socket Arm The RAP-BB-230-14-201U consists of a SHORT extension pole with (2 qty) 1" diameter ball ends and double socket arm. Dimensions: Overall Length (Arm Socket to Ball End): 14" Pole Length (Ball End to Ball End): 12.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Composite 3.25" Diameter Suction Cup Base w/1" Ball The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface. Features: Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size

RAM 16.75" Long Extension Pole with (2 qty) 1" Diameter Ball Ends The RAP-BB-230-18U consists of a LONG extension pole with 2 1" diameter ball ends. The ball ends are compatible with all 1" ball double socket arms. Dimensions: Pole Length (Ball End to Ball End): 16.75" Features: 1. Extension poles are buoyant, will float if dropped in the water 2. All components are plastic or stainless steel making this camera system the perfect solution for many outdoor activities, including saltwater applications 3. Light weight, easily adjustable and packable - easily break down your camera system to stow when not in use 4. Modular system allows for infinite configurations - easily capture self-portrait images from water level, overhead shots and even underwater images of your latest catch 5. Easily rotate the mounted camera to operate on-board functions, check shot angles and other critical adjustments 6. Lifetime warranty 7. Made in USA Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

BURKS GA6-1.5MV-5-11/16, PUMP END ONLY with VITON SEAL UNSPSC Code: 40150000

BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT Bronze Fitted Cast Iron Construction. Base mounted Pump Only less Motor. Ports are Inches NPT Inlet, Inches NPT Outlet.   UNSPSC Code: 40150000

Universal No-Drill™ RAM POD HD™Vehicle Mount with 18" LONG Length Pole and Double Socket Arm Blending the best of versatility, strength and installation ease; the RAM POD HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD™is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be removed quickly without the use of tools. The versatility of the RAM POD HD™makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Pole Length: Minimum: 24.75”/Maximum: 31.75”  Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Aluminum post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Features: Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves Back plate can support various size support cups Spring loaded tension provides secure support for your tablet Spring loaded cradle allows for quick release of your tablet Full access to all ports Material:High Strength Composite Note:The "U" in the part number reflects product packaged in poly bag. Weight:0.65 lbs.

RAM 6.25" x 2" Universal Electronics Base with 1.5" Ball The RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

The RAP-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.