|
RAM 1" Diameter Ball Flat Surface Mount with Long Double Socket Arm, 2.5" Round Base & Diamond Base
The RAM-B-138U-C consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, LONG double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
Overall Height:
6.59"
Material:
Powder Coated Marine Grade Aluminum
Ball Size
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
33.54 |
|
|
RAM 1" Diameter Ball Mount with Long Arm & 2/Diamond Bases
The RAM-B-102U-C consists of a long double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
32.46 |
|
|
RAM 1" Diameter Ball Flat Surface Mount with Short Double Socket Arm, 2.5" Round Base & Diamond Base
The RAM-B-138U-A consists of a 2.5" diameter round base that contains the universal AMPs hole pattern, SHORT double socket arm and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
Overall Height:
3.09"
Material:
Powder Coated Marine Grade Aluminum
Ball Size
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.84 |
|
|
RAM 1" Diameter Ball Long Double Socket Arm with Diamond Base. Overall Length: 6.62"
The RAM-B-103-C-238U consists of a diamond base and LONG double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Dimensions:
Overall Length: 6.62"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
26.75 |
|
|
RAM 1" Diameter Ball Double Socket Arm with Diamond Base
Part #: RAM-B-103-238U
The RAM-103-238U consists of a diamond base and double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.21 |
|
|
RAM 1" Diameter Ball Short Double Socket Arm with Diamond Base. Overall Length: 3"
The RAM-B-103-A-238U consists of a diamond base and SHORT double socket arm that will accept 1" ball bases. The diamond base measures 2.43" x 1.31" and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Dimensions:
Overall Length: 3"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
18.30 |
|
|
RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter
Part #: RAM-B-121-238U
Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
42.52 |
|
|
RAM Glare Shield Clamp Mount with Diamond Base Adapter
The RAM-B-177U consists of a double socket arm, glare shield clamp base and diamond base adapter. The RAM-B-177U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
40.08 |
|
|
RAM Yoke Clamp Mount w/Diamond Base - Long
Part #: RAM-B-121-C-238U
Universal glare shield/yoke mount with LONG double socket arm and universal diamond base adapter, is ideally suited for a day on the wing and yet easily removed for travel in the flight bag. Both strong and light weight, this new clamping base is perfect for numerous electronic devices commonly found in the cockpit. Modular in design, switch out the clamps for a perfect fit no matter what the mounting surface, or add a second ball to mount another device. Crafted to hold firm to most glare shields, yokes, or tubing, practically any aircraft can benefit from this product. Simple to use and exceptionally versatile, RAM has created another "must have" for any pilot. The RAM-B-121-C-238U fits rails or edge lips from 0.625" to a maximum of 1.25". The mounting base can also accept a second ball giving you the ultimate double ball base.
Clamp Dimensions:
Fits rails or edge lips from 0.625" to a maximum of 1.25"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The rail does not need to be perfectly round to mount this base.
|
49.64 |
|
|
RAM 1" Diameter Ball Mount with Short Arm & 2/Diamond Bases
The RAM-B-102U-A consists of a short double socket arm and two diamond bases. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.05 |
|
|
RAM Mount Universal Finger Grip Holder Surface Mount
Part #: RAM-B-138-UN4
Simply choose the base mounting hardware and the possibilities become endless with a RAM flat surface mount. Four mounting holes in the round ball base easily accommodate up to a #10 screw. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device.
Universal Finger Grip™ Holder Description:
The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.
This mount is designed to hold the following devices:
Cell Phones
2-Way Radios
GPS Devices
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions:
2.5W x 5.0H"
Using Short Arm Side Clamps:
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"
Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"
Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
56.47 |
|
|
RAM Composite Twist Lock Suction Cup Mount w/ Diamond Adapter
Description:
The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
22.02 |
|
|
1" Ball Marine Electronics Mount with Diamond Base
The RAM-B-107U-238 consists of a double socket arm, diamond base and connecting Humminbird/Apelco marine base. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The diamond base contains two holes 1.912" from center to center, positioned at both ends of the base. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
RAM 1" Ball Marine Electronic Mount with Diamond Base for the Humminbird 100-700 Series, Matrix Series and Lowrance Elite-5 Series.
Features:
Overall Height: 5"
Weight Capacity: To 2.25kg approximately 5 lbs
Ball Size: 1: Rubber "B" Ball Size
Material: Powder Coated Marine Grade Aluminum
Note: The "U" in the part number reflects product will be packaged in a poly bag
Weight: 0.68 lbs
|
36.72 |
|
|
RAM Drink Cup Holder Mount w/ Diamond Base
Part #: RAM-B-102-132u
A favorite world wide, the RAM self leveling drink cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Included is a cozy, self leveling drink cup, double socket arm and diamond plate that contains the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with an adjustment point at the diamond plate and base of the cup holder.
Ball Size:
1" Rubber "B" Ball Size
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
|
32.59 |
|
|
1" Ball Standard Length Double Socket Arm w/Medium Tough-Claw™ Base
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
42.23 |
|