RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter The RAM-B-176U consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals: Metric Standard 12mm .5 degrees 14mm .5 degrees 16mm .63 degrees 18mm .71 degrees 20mm .79 degrees 28mm 1.10 degrees Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.

Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter The RAP-B-400-238U consists of the small Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.35 lbs.

RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A dapter The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 2.25" Clamping Range (Flat Surfaces): 0" to 2.2"

Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Clamping Range (Rail/Tube Surfaces): 1" to 1.875" Clamping Range (Flat Surfaces): 0" to 1.6" Specifications/Features: High strength glass filled nylon construction with corrosion resistant stainless steel hardware Rubber pads provide stable, even gripping and protection of mounting surface Clamp jaw is configured for round, flat and odd shapes Quick installation and removal of Tough-Claw™ Lifetime Warranty! Made in U.S.A. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 11mm Flat Base with Double Socket Arm and Diamond Adaptor (U) The RAM-B-179U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. The RAM-B-252U, base for the RAM-B-179U, consists of a 1" diameter ball and 2.25" x 0.875 base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 9mm Angled Base with Double Socket Arm and Diamond Adaptor (U) The RAM-B-180U, offset motorcycle base, makes attaching to a variety of mounting locations, including handlebars, a breeze. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your mobile electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. With a turn of a single comfortable to grasp knob, adjustments can be made and the sleek hourglass shape of the arm assembly compliments the lines of any motorcycle. The RAM-B-272U, base for the RAM-B-180U, consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Small Tough-Claw™ Base with Double Socket Arm & Universal X-Grip® Cell/iPhone Cradle The RAM-B-400-UN7 consists of the Tough-Claw™ rail clamp base, STANDARD length double socket arm and universal spring loaded X-Grip® cradle for phones. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your tablet. Included are easy access grip knobs for quick insertion and release of your handheld device. The Tough-Claw™ rail clamp base is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Features: Clamping Range (Rail/Tube Surfaces): 0.625" to 1.5" Clamping Range (Flat Surfaces): 0" to 1.14" Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25"), Maximum Width = 3.25" (Minimum Height = 2.25"), Depth = 0.875" Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: Part number reflects product packaged in clear clam shell for store shelf display. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.95 lbs.

Tough-Charge™ Waterproof Wireless Charging Motorcycle Mount The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it's placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging handlebar kit includes a B size diamond base featuring a 1” rubber ball, short length double socket arm, and zinc-coated U-bolt base. U-bolt hardware accommodates rails from .5" to 1.25" in diameter. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger.  Features: Waterproof Qi wireless phone charging cradle features spring-loaded RAM X-Grip technology Kit for motorcycles includes wireless cradle, B size diamond ball base, short double socket arm, U-bolt handlebar base, extension cable, and hardwire charger Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM Mounts backed by lifetime warranty, RAM electronics backed by 1-year warranty Specifications: Clamp Range: .5" - 1.25" diameter Socket-to-Socket Length: 1.75" Ball/Socket Size: B Size (1") Materials: Marine-grade aluminum High strength composite stainless steel  Output Connector Type: USB Type-A Male Input Cable Length: 20" with optional 1.2M extension cable Compliance: Over current protection, short circuit protection and over temperature protection  Hardware Included: (1) Safety Tether (1) Glue Tube for Rubber Caps (1) Cradle Leg (1) Cradle Leg Cover (1) Silicon sleeve for USB waterproof connection (1) 1.2 Meter USB Extension Cable (4) 4" Zip Ties (6) 7" Zip Ties (1) 1/4"-20 U-Bolt for .5" - 1" Rails (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails (2) 1/4"-20 Nylock Nuts (2) Rubber Caps (1) U-Bolt Spacer

Universal No-Drill RAM Pod HD Vehicle Mount w/Double Socket Arm & 2.5" Round Base (AMPS Hole Pattern) Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Motorcycle Base w/9mm Hole & 1" Ball The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick). Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

Tough-Claw Small Clamp Mount w/Double Socket Arm - 1" Ball MODULAR DESIGN The rubber ball and socket design offers a secure hold with infinite options and vibration dampening for demanding environments. BEST WARRANTY The philosophy is simple—build the best products available. And so our warranty is simple too. If we built it, we guarantee it. We are confident in the quality of our products, and with our warranty, you can be too. MADE IN AMERICA The all-American staff designs, manufactures, assembles, and sells our products right here, and ships them straight to you. Clamp Range: .625" - 1.14" diameter Socket to Socket Length: 1.75" Ball Size: B Size (1") Weight Capacity: Standard Use: 2 lbs/Heavy-Duty Use: 1 lb Materials: Marine-grade aluminum/High strength composite

Universal X-Grip® Cell Phone Cradle w/Double Socket Arm Consists of the universal spring loaded X-Grip® cradle and standard size composite double socket arm. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The double socket arm will accommodate all 1" ball bases. The X-Grip® includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions: Minimum Width = 1.875" (Minimum Height = 4.25") Maximum Width = 3.25" (Minimum Height = 2.25") Depth = 0.875" Specs & Features Rustproof High strength composite and stainless steel construction Spring loaded cradle expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Includes Tether for open cockpit and extreme environments Lifetime warranty Made in U.S.A. Material: Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. RAM highly recommends using the provided Tether for all open cockpit applications while using this product. Weight: 0.46 lbs.

Composite 3.25" Diameter Suction Cup Base w/1" Ball The RAP-B-224-1U, composite twist lock mount consists of a 3.25" rubber base that is connected to the (RAP-B-238U), diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface. Features: Material: High Strength Composite Ball Size: 1" Rubber Ball "B" Size