RAM POD III w/Double Ball Mount RAM Tough-Tray Description: The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics. RAM POD III Description: The RAM POD III is the latest in the Mobile In-Car range from RAM. This universal base allows you to mount a laptop or any other in car device safely and securely. Mounting Instructions: At right angles to the base of two legs are feet with mounting holes. Place the holes into the passenger seat mounting bolts then adjust the mount to the required height with the flexible legs. The third flexible leg on the RAM Pod III should also be adjusted to help support the mount. The flexible rigid arms will hold everything you need safely and securely. Leg Length Dimensions: Length of Leg 1: 18" Length of Leg 2: 20" Length of Leg 3: 30" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag.

RAM POD III Universal No-Drill Laptop Mount w/Tough-Tray The RAM-316-3SW1U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, ratchet swing arm and RAM Tough-Tray. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four (4) side clamping arm with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, smartphones or other electronics. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Pod I Universal No-Drill Vehicle Mount w/Netbook Tray Well thought out and compact designs are common place at RAM and our RAM Tough Tray II™ is no exception. Spring loaded to create just the right amount of holding force, most tablets, UMPC's, and compact laptops can be made safe and secure while on the go. Simple to install and adjust retaining arms insure a perfect fit without interfering with ports or functions. Also, if a compact laptop is in place, these retaining arms hold firm with the screen up or down. Ideally suited to a multitude of applications, and easily attached to hundreds of mounting systems for cars, boats, planes, and more, compact devices just work better in the universal tablet holder from RAM. This kit includes the RAM-234-6 with the RAM POD I with a 1" diameter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt. Tough Tray II™ Dimensions: Tray Depth: 6.0" Tray Thickness: 1" Tray Width (Expansion): 8.56" to 11.12" Side Clamp Arm Height: 2.75" max Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm & 2/2.5" Round Bases (AMPs Hole Pattern) The RAM-316-3-202U consists of the RAM POD III No-Drill vehicle base, three rigid aluminum rod legs, double socket arm and two 2.5" round bases that contain the universal AMPs hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The universal AMPs hole pattern found on the round base adapter will connect to many RAM cradles. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Pod I Universal No-Drill Vehicle Mount w/Universal X-Grip III Holder f/Large Tablets The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill® vehicle base, 18" rigid aluminum rod, socket system and universal X-Grip® III clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip® III clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip® III clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip® III. The RAM X-Grip® III cradle is compatible with the following tablets WITH OR WITHOUT CASE: Apple iPad Air Apple iPad 4 (With Lightning Connector) Apple iPad 3 Apple iPad 2 Apple iPad 1 HP TouchPad Asus EEE Pad Asus Eee Pad Transformer Lenovo LePad Slate & IdeaTab Lynx LG G-Slate LG Optimus Pad Microsoft Surface Motorola XOOM Motorola XYBOARD 10.1 Samsung Galaxy Tab 8.9 Samsung Galaxy Tab 10.1 Samsung Galaxy Tab 2 10.1 Samsung Galaxy Tab 3 10.1 Toshiba Thrive Most 10" Screen Tablets X-Grip® III Cradle Features: 1. Spring loaded cradle expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of cradle allows for attachment to many 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the cradle for quick release of your tablet 6. Multiple mounting access points on the back of the cradle 7. Additional support keeper at the bottom of the cradle 8. Full access to all ports 9. Lifetime warranty Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Note: The RAM-B-316-1-UN9 is not compatible with the Apple iPad with LIFEPROOF NUUD CASE

POD I Universal No-Drill™ Vehicle Mount with 24" Rigid Aluminum Rod & 1.5" Diameter Ball Round Adapter Base The RAM POD I, universal no-drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely. Features: Installation Instructions: At right angles to the base of the flexible 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag

RAM POD I Universal No-Drill Vehicle Mount Connecting to No Ball Base Part #: RAM-B-316-1U The RAM-B-316-1U, universal RAM-POD I vehicle mount, consists of a single open socket arm, connected to a 18" long flexible rod. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely. Installation Instructions: At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base Part #: RAM-B-316-1-238U The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18" rigid flex rod. The flex rod base is designed to connect to a vehicle seat rail bolt in cars, trucks, fleet vehicles and suvs. The flex rod can hold light to medium weight items in your vehicle safely and securely. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Universal No-Drill™ RAM POD HD™Vehicle Mount with Double Socket Arm & 2.5" Round Base AMPs Hole Pattern Blending the best of versatility, strength and installation ease; the RAM POD HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD™is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM POD HD™ makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Pole Length: Minimum: 18.75” Maximum: 25.75” Features: Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - aluminum post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag Weight: 5.15 lbs.

Universal No-Drill™ RAM POD HD™Vehicle Mount with 18" LONG Length Pole and Double Socket Arm Blending the best of versatility, strength and installation ease; the RAM POD HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD™is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be removed quickly without the use of tools. The versatility of the RAM POD HD™makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Pole Length: Minimum: 24.75”/Maximum: 31.75”  Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Aluminum post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM (Left Hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Solid steel post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM (Left Hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm and Diamond Base (AMPS 2-Hole Pattern) Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Solid steel post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM (Left hand Orientation) Universal No-Drill™ RAM Pod HD Vehicle Mount w/ Double Socket Arm & 3.625" Square Base (Vesa 75mm x 75mm Hole Pattern) Blending the best of versatility, strength and installation ease; the RAM ToughPod HD™ is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM ToughPod HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM ToughPod HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet. Low Profile, Low Cost and Extremely Robust: - The minimalist design offers a low profile form factor while offering an extremely robust mounting platform - Ideal mounting solution for fleet and service vehicle fleets with a varying range of vehicles. Stands up to the demands of field applications Highly Versatile: - Angle adjustment feature to compensate for varying floorboard angles - Can be used as a horizontal or vertical flat surface drill-down mount - Solid steel post can be cut to size in order to accommodate varying vehicle configurations Easy to Install and Remove: - Works on most vehicles. Fast and simple installation, requires no drilling or modification to your vehicle - Attaches using an existing seat rail bolt or seat track - Remove the upper portion of the mount with the turn of one knob, creating valuable space in the cab when the mount is not in use Pole Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size

RAM Mount POD I No-Drill Vehicle Mount w/X-Grip II Part #: RAM-B-316-1-UN8U Consists of the universal spring loaded X-Grip II holder and RAM POD I universal No-Drill vehicle mount. The base of the mount clamps to your seat rail without any drilling necessary. Connected to the base is a 18" rigid flexible rod that can be bent to position your device to it's optimum viewing location. The RAM POD I will hold everything you need safely and securely. X-Grip II consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. It expands and contracts for perfect fit of most 7" tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip II. Compatible Devices: Amazon Kindle Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Samsung Galaxy Tab (7" version) Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your tablet 2. Rubber coated tips will hold your tablet firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts 4. Socket technology allows for multiple adjustment angles and articulation of your tablet 5. Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite, Rubber Tips and Powder Coated Marine Grade Aluminum