RAM Flat Surface Horizontal Single Swing Arm Mount The RAM single swing arm mount consists of a 6" long BENT swing arm mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360 degree rotation. Dimensions: Center of knob to center of ball socket: 6" Overall length of swing arm assembly: 10.75" Overall height: 5.6" Height from base to top of knob: 4.91" Material: Powder Coated Marine Grade Aluminum Note:The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM® Tilt-N-Turn™ 90-Degree Bracket with Single Swing Arm The RAM-VB-TNT90-1, Tilt-N-Turn™ 90 degree motion attachment swing arm, consists of a steel plate on a single swing arm that has a tilt range of 90 degrees forward and back from the vertical position. The small range of tilt is designed to angle a connected RAM laptop cradle forward giving you a comfortable typing and viewing angle. The Tilt-N-Turn™ plate can spin in 360 degrees around on the swing arm end, and with a twist of the side lock knob, the attachment will tilt forward and back. Knowing that this product has countless applications, numerous hole patterns are built right in making the Tilt-N-Turn™ exceptionally versatile. The AMPS, 90 degree AMPS, 75 x 75MM VESA, 2” x 4”, and RAM’s own three hole at 120 degrees take the guess work out of whether this product will work for you. Whether you have and existing RAM system and want to integrate this product, or simply need the best mounting system available, consider RAM and yet another ergonomic product; this time with the Tilt-and-Turn™ feature.  Hardware Included: (1) 3/8"-16 x 1.5" Carriage Bolt (1) 3/8"-18 Lock Nut (1) 2" Rubber Washer (2) 5/16" Flat Washer Materials:  Powder coated steel Marine grade-aluminum

RAM Mixed Combination Pin-Lock™ Security Kit for Single Swing Arm Mounts and Gimbal Brackets The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM®mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering.

Horizontal 6" Swing Arm Mount with Ball The RAM-109H-2BU consists of a 6" long STRAIGHT swing arm mounted on a horizontal surface mounting base. At the free end of the mount swing arm is a round 1.5" diameter ball. The connection between the swing arm and the base is a bolt pivot point, and the round plate and arm connection is the RAM ball and socket system. The bolt pivoting point allows a complete 360 degree rotation and the ball and socket system allows a 180 degree vertical pivot with a 360 degree rotation.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.67 lbs.

RAM Mount Universal Finger Grip Holder Surface Mount Part #: RAM-B-138-UN4 Simply choose the base mounting hardware and the possibilities become endless with a RAM flat surface mount. Four mounting holes in the round ball base easily accommodate up to a #10 screw. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. Universal Finger Grip™ Holder Description: The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. This mount is designed to hold the following devices: Cell Phones 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25" Maximum with Top and Bottom Plates: 6.0" The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 2.5W x 5.0H" Using Short Arm Side Clamps: Maximum Depth: 0.75" Minimum Width: 1.25" Maximum Width: 3.0" Using Medium Arm Side Clamps: Maximum Depth: 1.25" Minimum Width: 1.5" Maximum Width: 3.5" Using Long Arm Side Clamps: Maximum Depth: 1.6" Minimum Width: 2.25" Maximum Width: 3.5" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Security Knob Kit f/ Single Swing Arm

Heavy-Duty Single Swing ARM Lockable LED TV Wall Mount Bracket Majestic has a versatile range of swing arm brackets all specifically designed to handle the Harsh Marine and Tough Outback environment. Engineered in Australia under the some of the toughest outback conditions found anywhere in the world, you can be assured of the higher quality and reliability of the Majestic product. The Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket comes with a locking pin so that you can lock it in place when travelling. The TV Vesa plate on the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed for Majestic TV's and many other brands supporting both 75mm, 100mm and 200mm Vesa combinations. This bracket is designed to hold larger sized TVs' including the Majestic 32" as well as other branded TVs of 23" or above. Technical Features: Weight: The physical design of the Majestic ARM102 Heavy Duty Single Swing ARM Lockable LED TV Wall Mount Bracket is designed to be able to withstand the harsh Outback and tough Marine environment. It is designed to be able to hold TV weighing upto 30Kg, and is engineered with both 75mm x 75mm, 100mm x 100mm and 200mm x 200mm Vesa mounting holes or any combination of those, it can be used with all larger Majestic TV's  as well as other brands.  Warranty: Majestic products are designed and developed in Australia and exported globally, with over 15 years experience Majestic stands by the quality of our products by providing a 3 year worldwide warranty. Our engineering design team has paid attention to all the important details to ensure that when you purchase a product of this quality and caliber that you can enjoy many years of reliable performance in the toughest conditions where domestic brands will not survive. Note: It is recommended to remove the TV from the Arm during off-road transit. Adjustable angle: 10 degrees up/down Maximum load: 30kgs Suitable for TV sizes: 23" - 42" Distance to wall: 70-230mm Specifications: Color: Black Holds up to 30kg Max TV Size: 42" Vesa Size: 75mm, 100mm, 200mm

RAM® Pin-Lock™ Security Kit for Single Swing Arms & Gimbal Brackets The RAP-S-KNOBG-109U includes Pin-Lock™ security knobs/keys for single swing arms and Gimbal brackets. The RAP-S-KNOBG-109U offers the ideal amount of leverage to properly tighten your mount to prevent slippage in heavy chop or in extreme vibration environments. With an emphasis on aesthetics and function, the RAP-S-KNOBG-109U is low in profile and only adds a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included Pin-Lock™ security knob for Gimbal brackets is a universal design that utilizes various stud sizes to accommodate most popular GPS, chart plotter, fish finder and VHF radio brands. With a simplistic design, our security knob is extremely affordable and simple to install. Pair this with a security knob for your RAM® mount and you can feel at ease when leaving your expensive electronics in public places without the concern of theft or tampering. Hardware Included: (2) RAM Pin-Lock Security Keys (1) 1.25" Nylon Washer (1) #10-24 x .72" Threaded Stud Adapter (1) 5/16"-18 x 1.06" Threaded Stud Adapter (1) 1/4"-20 x 1.34" Threaded Stud Adapter (1) M5-.8 x 12mm Threaded Stud Adapter (1) M6-1 x 16mm Threaded Stud Adapter (1) M8-1.25 x 21mm Threaded Stud Adapter (4) .72" Nylon Washers (1) .77" Nylon Washer

Single Swing Arm Bracket w/Locking Pin Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plat so you can remove the TV and ARM when travelling in harsh conditions.  You can also purchase an addition base plate if you would like to move the TV & ARM to a different location! Majestic has a versatile range of swing arm brackets. The ARM101 can be easily removed from the base plate so you can remove the TV and ARM when travelling in harsh conditions.  You can also purchase an addition base plate if you would like to move the TV & ARM to a different location! The ARM101 is also compatiable with the Majestic locking pin.  The locking pin is designed to lock your arm bracket against the wall during transit. The ARM101 comes in Black and also has removable covers to allow you feed cable through so that your installation is nice and neat. The Vesa plate is designed for Majestic TV's and many other brands. Note: It is recommended to remove the TV from the wall during off-road transit. Adjustable angle: 10 degrees up/down Maximum load: 15kgs Suitable for TV sizes: 13" - 27" Distance to wall: 70-235mm

Universal X-Grip® Flat Surface Mount The RAM-B-138-UN7U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring loaded X-Grip® holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone holder evolved. Holder Dimensions: Minimum Width = 1.875" Maximum Width = 3.25" Depth = 0.875" Features: Rustproof High strength composite and stainless steel construction Spring loaded holder expands and contracts for perfect fit of your device Rubber coated tips will hold device firm and stable Socket technology allows for multiple adjustment angles and articulation of device Lifetime warranty Made in U.S.A. Material: Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite Ball Size: 1" Rubber Ball "B" Size

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.  Specifications: Base: Flush base Fits: 2” flat surfaces

RAM 12" Long Double Swing Arm with Open Swivel Single Socket The RAM-VB-110-4U consists of two 6" long single swing arms, Tele-Pole connection hole and swivel single socket that will accommodate 1.5" ball bases. The two swing arms connect with a bolt and knob system. With a simple turn of the knob you can pivot the swing arms at this center point and the tighten the knob to lock the arms in place. The swivel single socket arm allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. Easily incorporated into numerous RAM systems, this rotating swing arm is available with the standard 1.5 inch ball size or the heavy duty 2.25 inch ball size. Swing Arm Length: 12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting Base The RAM single swing arm mount consists of a 6" long swing arm mounted on a vertical surface mounting base. At the device mounting end of the mount is a rectangular 6.25" x 2" plate. There are two (2) pivoting points on the mount. One at the swing arm and base and one at the center of the rectangular plate and the end of the swing arm. Each pivoting point allows a complete 360° rotation. Max Weight Capacity: 10 lbs. Dimensions:  Center of knob to center of ball socket: 6" Overall length of swing arm assembly: 11.4375" Overall height: 8.45" Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.

RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Mount will attach to flat surfaces with the following dimensions: Min: 4.4mm / 0.17" Max: 28.0mm / 1.12" Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.