RAM 2" x 4" Rectangle Base with 1.5" Ball The RAM-202U-24 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 4" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 2" Square Base with 1.5" Ball The RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 3" Rectangle Base with 1.5" Ball The RAM-202U-23 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Mounting hardware not included with purchase.

RAM 1.5" Ball Marine Electronic "RUGGED USE" Base for the Humminbird 100, 300, 500, 700 Series, Matrix Series and Lowrance Elite-5 Series The RAM-107BU is a marine grade aluminum base with 1.5" rubber ball. The base connects to the underside of Humminbird and Raymarine marine GPS devices listed below. This base is compatible with the following electronic devices: Humminbird 700 Series Humminbird 500 Series Humminbird 300 Series Humminbird 100 Series Humminbird Matrix Series (excluding Matrix 97) Lowrance Elite-5 Lowrance Elite-5M Lowrance Elite-5X Raymarine Apelco Fishfinder with matching hole pattern Ball Size: 1.5" Rubber Ball Size Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. The RAM-107BU is a "rugged use" base, designed to hold large marine electronic devices.

RAM Stainless Steel Double U-Bolt Base with 1.5" Ball for Rails from 1" to 1.25" in Diameter The RAM-235U consists of a stainless steel double u-bolt base connected to a 1.5" diameter ball. The double u-bolt base will accommodate rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. This mount includes stainless steel u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt.

RAM Rail Base with Zinc Coated U-Bolt & 1.5" Ball for Rails from 0.5" to 1" in Diameter The RAM motorcycle handlebar base contains a 1.5" rubber ball designed to sit at right angles to the mounting rail. The zinc coated u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5". U-Bolt Dimensions: Accommodates rails from 0.5" to 1" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

100 x 100mm VESA Plate w/1.5" Ball This RAM-246U consists of a 1.5" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner.  Square plate features the VESA hole pattern for connection to a wide variety of devices Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments Backed by a lifetime warranty Material:  Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Plate Size: 4.75" x 4.75" Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2-7/16" X 1-5/16" Base w/Ball Part #: RAM-238U The powder coated marine grade aluminum base contains a 1.5" diameter rubber ball connected at right angles to a 1.25" x 2.5" inch diamond plate. The base has two holes 1.912" from center to center, positioned at both ends of the diamond base. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" x 3" Rectangle Base with 1.5" Ball The RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 6.25" x 2" Universal Electronics Base with 1.5" Ball The RAM-111BU consists of a 1.5" diameter rubber ball connected at right angles to a flat 6.25 x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Triple Suction Cup Base with 1.5" Ball The RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the RAM-224-3U on a glass or non-porous plastic surface. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.14 lbs.

RAM 1" x 2" Rectangle Base with 1.5" Ball The RAM-202U-12 consists of a 1.5" diameter rubber ball connected at right angles to a 1" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" x 2.5" Rectangle Base with 1.5" Ball The RAM-202U-1525 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 2" x 2.5" Rectangle Base with 1.5" Ball The RAM-202U-225 consists of a 1.5" diameter rubber ball connected at right angles to a 2" x 2.5" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 1.5" x 2" Rectangle Base with 1.5" Ball The RAM-202U-152 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 2" rectangular base. This mount has pre-drilled holes at each corner of the base plate. Material:  Powder Coated Marine Grade Aluminum Ball Size:  1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.