|
RAM Short Double Socket Arm f/3-3/8" Bases
Part #: RAM-E-201U-D
The RAM-E-201U-D short double socket arm has a socket at both ends that accomodates 3-3/8" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 7.25"
Socket-to-Socket Length: 4.375"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
106.10 |
|
|
RAM Double Socket Arm f/3-3/8" Ball Bases
Part #: RAM-E-201U
The RAM-E-201U double socket arm has a socket at both ends that accommodates 3.38" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 12.625"
Socket to Socket Length: 9.875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball E Size
|
158.98 |
|
|
RAM Short Double Socket Arm with Jam Nut for 2.25" Ball Bases
Part #: RAM-D-201U-C-MI1
The RAM-D-201U-C-MI1, short double socket arm with jam nut, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
50.05 |
|
|
Description:
The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
17.64 |
|
|
RAM 3.68" Diameter Base w/3-3/8" Ball
Part #: RAM-E-202U
The RAM-E-202U consists of a 3.38" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
3.38" Rubber Ball "E" Size
|
48.48 |
|
|
Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short Arm
The RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
|
28.49 |
|
|
RAM® Track Ball™ Mount for Garmin Striker + More
This RAM® Track Ball™ bundle includes the RAM® Track Ball™, the RAM® Double Socket B Size Arm, and the RAM® Round Plate with Ball & Mounting Hardware for Garmin Striker and other fishfinder models. The RAM® Track Ball™ consists of a B-size 1" rubber ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the RAM® Track Ball™ into the track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball.
The included RAM-B-201U consists of a medium-length double socket arm that accommodates 1" B-size ball bases, device holders, and adapters. The easy-to-adjust knob allows for near-infinite adjustability for the connected device. The RAM-B-202-G4U consists of a 1"-diameter rubber ball connected to a flat 2.5"-diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.
Features:
Designed for track mounting systems including the RAM® Tough-Track™; includes 1" B-size rubber ball
Features a rubber friction washer and a stainless steel T-bolt; simply insert it into the track and twist the ball clockwise to tighten
Standard RAM® double socket arm provides an ideal overall length of 3.73" and a socket-to-socket length of 3"
Made of high-strength composite and steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (3) #8-32 x 5/8" Machine Screws and (3) #8-32 Nylock Nuts
T-Bolt Dimensions (inch): 0.48" x 0.95"
Socket to Socket Length: 3"
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496"; 3-Hole 120-Degree: 1.812" Diameter
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum and high-strength composite
Packaging Type: Polybag
Weight: 0.4 lbs.
Compatibility:
Garmin: Striker 4, Striker 4dv, Striker Plus 4cv, Striker Vivid 4cv, echo 100, echo 150, echo 300c, ECHOMAP Plus 42cv, ECHOMAP Plus 43cv, ECHOMAP Plus 44cv, ECHOMAP Plus 45cv, and ECHOMAP UHD2 6"
|
33.83 |
|
|
Strap Clamp Roll Bar Mount w/Standard Length Double Socket Arm & 2.5" Round Base with 1/4"-20 Male Threaded Post
The RAM-B-149Z-2-202AU consists of a steel strap base, u-bolt bases, double socket arm and 2.5" dia. round base with 1/4"-20 threaded post. Designed for a clean installation, the included roll bar base accommodates most common tubing sizes on UTV's and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap clamp in a compact housing, you won't have to worry about exposed sharp edges or unwanted loosening. The camera base contains a 1" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
43.80 |
|
|
Low Profile Composite Double Socket Arm
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
Dimensions:
Overall Length: 2.75"
Socket-To-Socket Length: 2"
|
6.22 |
|
|
Composite Double Socket Swivel Arm
The RAP-B-200-12U, double socket swivel arm, consists of double 1" diameter open ball sockets with a 360° rotation point at the center of the arm. The rubber ball and socket at each end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit.
Dimensions:
Overall Length: 3.69"
Socket-To-Socket Length: 3.5"
|
13.62 |
|
|
RAM Double Socket Swivel Arm for 1" Ball Bases
The RAP-B-200-2U consists of double 1" diameter open ball sockets with a 360 degree rotation point at the center and a connecting swivel joint that rotates forward and back 180x. The rubber ball and socket at either end, and a central pivot point provides unsurpassed adjustability. The RAM ball sockets maximize ball coverage for optimal fit.
Dimensions:
Overall Length: 6.25"
Socket-To-Socket Length: 5"
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.36 |
|
|
The RAM-D-201U powder coated marine grade aluminum 6.88" double socket arm allow for connnection to a 2.25" diameter ball. Socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 8.375"
Socket-To-Socket Length: 6.5625"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
69.64 |
|
|
Double Socket Swivel Arm
Specifications:
Ball/Socket Size: C Size (1")
Weight Capacity: 2 lbs
Materials: High strength composite
Weight: 0.65 lbs.
|
22.36 |
|
|
Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting Base
The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a horizontal surface mounting base. At the device mounting end of the mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation.
Dimensions:
Overall length: 16.69"
Overall height: 8.577"
Height from bottom of base to top of knob: 4.89"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag
|
96.13 |
|
|
Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting Base
The RAM double swing arm mount includes two 6" long BENT swing arms mounted on a vertical surface mounting base. At the end of the device mount is a rectangular 6.25 x 2" top base. The pivoting points of the mount allow a complete 360° rotation.
Powder Coated Marine Grade Aluminum
|
105.36 |
|