RAM Handlebar/Rail Mount f/Garmin Montana® Series Included is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter. This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Features: 1. Open access to all electronic ports and camera 2. Patent pending roller design for super smooth placement and removal of the GPS Material: High strength composite

RAM Flat Surface Waterproof Mount f/Garmin Montana® Series This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Features: 1. Open access to all electronic ports and camera 2. Patent pending roller design for super smooth placement and removal of the GPS Material: High strength composite

RAM Cradle Holder for Garmin Montana® Series This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Handlebar Rail Mount, Zinc Coated U-Bolt & 1" Diameter Ball with Custom GoPro Hero Adapter The RAM-B-149Z-GOP1U consists of a zinc coated u-bolt base, standard size double socket arm and 1" diameter ball with custom GoPro Hero adapter. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base includes black cover caps to be placed over the exposed ends of the u-bolt. The included composite rail adapter can narrow the rail to a minimum width of 0.5". Compatible GoPro Cameras: All HD HERO Original + HD HERO2 Professional Cameras U-Bolt Dimensions: Accommodates rails from 0.5" to 1.25" in diameter Material: High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Universal Finger Grip Holder Handlebar Rail Mount Part #: RAM-B-149Z-UN4U Motorcycle Handlebar Mount Description: The motorcycle mount makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM?s patented design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware for tubing that is 0.50" to 1.25" in diameter. Universal Finger Grip™ Holder Description: The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns. This mount is designed to hold the following devices: Cell Phones 2-Way Radios GPS Devices Height Dimensions: Minimum with Top and Bottom Plates: 5.25" Maximum with Top and Bottom Plates: 6.0" The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 3" Width x 3" Height Using Short Arm Side Clamps: Maximum Depth: 0.75" Minimum Width: 1.25" Maximum Width: 3.0" Using Medium Arm Side Clamps: Maximum Depth: 1.25" Minimum Width: 1.5" Maximum Width: 3.5" Using Long Arm Side Clamps: Maximum Depth: 1.6" Minimum Width: 2.25" Maximum Width: 3.5" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 220 Garmin GPS 60 Garmin GPSMAP 60 Garmin GPSMAP 60C Garmin GPSMAP 60CS Garmin GPSMAP 60CSx Garmin GPSMAP 60Cx Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. *The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.

RAM Cradle Holder for the Garmin dezl 560LMT & 560LT This RAM high strength composite cradle is designed to hold the following devices: Garmin dezl 560LMT Garmin dezl 560LT Features: Open access to all electronic ports including audio port, speaker/mic and mini USB Patent pending roller design for super smooth placement and removal of the GPS Custom pocket for factory dock Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Spine Clip Holder with Ball for Garmin Handheld Devices  With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. For use in nearly any application, the included B size diamond base adapter and hardware allows you to connect your Garmin handheld to any RAM® B size mounting base.  Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: Part number reflects product packaged in a poly bag.

RAM Tab-Tite Universal Clamping Cradle f/Google Nexus 7 w/ or w/o Light Duty Sleeve The RAM-HOL-TAB18U consists of a spring loaded back plate and custom support cups for the Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB18U is just what you need to get the most out of your tablet. The RAM Tab-Tite cradle is compatible with the following tablets: Google Nexus 7 WITH OR WITHOUT LIGHT DUTY SLEEVE The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Tab-Tite Cradle Dimensions: Height: 7" minimum to 8.875" maximum Width: maximum to 4.7" Depth: maximum to 0.43" Tab-Tite Cradle Features: 1. Support cups contain open slots to accommodate for tablets of various sizes 2. Back plate can support various size support cups 3. Spring loaded tension provides secure support for your tablet 4. Spring loaded cradle allows for quick release of your tablet 5. High strength materials maximize longevity of cradle 6. Full access to all ports 7. Lifetime warranty Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

Handlebar Mount for Montana® Series Take your Montana® anywhere and everywhere with this handlebar mount. Simply snap your device - in any orientation, portrait or landscape - into the 22 to 32mm rugged mount, which attaches to any standard bicycle handlebar, and it's ready for your next cycling tour or mountain biking adventure. A molded rubber cushion is included in the kit to increase the mount's grip on the handlebar and also to prevent rotation during possible vibration. Kit also includes hardware and instructions. Compatible Devices: Montana®; 600 Montana® 650 Montana® 650t WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base for the Garmin Astro 320, GPSMAP 62, 62s, 62sc, 62st & 62stc The RAM-B-149Z-GA41 consists of a double socket arm, zinc coated u-bolt base, diamond adapter base and custom high strength composite cradle for the Garmin GPSMAP 62 series. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the motorcycle GPSMAP mount to your optimum viewing position. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. This mount is designed to hold the following devices: Garmin Astro 320 Garmin GPSMAP 62 Garmin GPSMAP 62s Garmin GPSMAP 62sc Garmin GPSMAP 62st Garmin GPSMAP 62stc U-Bolt Dimensions: 0.50" to 1.25" Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM® Spine Clip Garmin Mount with Handlebar U-Bolt Base  The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. Included are a medium-length RAM® double socket arm and zinc-coated handlebar U-Bolt base that accommodates rails from .5” to 1.25” in diameter. This ideal motorcycle mount is perfect for securing your Garmin device in the harshest conditions. Features: Kit includes RAM® Spine Clip Holder for Garmin, B size diamond ball base, short double socket arm, and RAM® U-Bolt base The holder secures any Garmin handheld device with an integrated spine connection The U-bolt base includes a bar spacer and accommodates rails from .5" to 1.25" in diameter Backed by a lifetime warranty Compatible Garmin Devices: Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™ Includes: Assembly Hardware (1) 1/4"-20 U-Bolt for .5" - 1" Rails (1) 1/4"-20 U-Bolt for 1" - 1.25" Rails (2) 1/4"-20 Nylock Nuts (2) Rubber Caps (1) U-Bolt Spacer Specifications: Clamp Range (inch): .5" - 1.25" diameter Socket to Socket Length (inch):1.75" Ball Size: B Size (1") Weight: 0.68 lb. Materials: Marine-grade aluminum, high-strength composite Weight Capacity:  Standard Use: 2 lbs Heavy-Duty Use: 1 lb

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size 

RAM® Torque™ 3/4" - 1" Diameter Handlebar/Rail Base with 1" Ball, SHORT Arm and Diamond Plate Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/4" to 1" in diameter with a B-sized short length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/4" to 1" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size