|
RAM Flat Surface Waterproof Mount f/Garmin Montana® Series
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Features:
1. Open access to all electronic ports and camera
2. Patent pending roller design for super smooth placement and removal of the GPS
Material:
High strength composite
|
37.01 |
|
|
RAM Handlebar/Rail Mount f/Garmin Montana® Series
Included is mounting hardware that will accommodate rails from 0.5" to 1.25" in diameter.
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Features:
1. Open access to all electronic ports and camera
2. Patent pending roller design for super smooth placement and removal of the GPS
Material:
High strength composite
|
43.88 |
|
|
RAM Cradle Holder for Garmin Montana® Series
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Montana 600
Garmin Montana 650
Garmin Montana 650t
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
10.73 |
|
|
RAM Mount Universal Finger Grip Holder Surface Mount
Part #: RAM-B-138-UN4
Simply choose the base mounting hardware and the possibilities become endless with a RAM flat surface mount. Four mounting holes in the round ball base easily accommodate up to a #10 screw. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device.
Universal Finger Grip™ Holder Description:
The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.
This mount is designed to hold the following devices:
Cell Phones
2-Way Radios
GPS Devices
Height Dimensions:
Minimum with Top and Bottom Plates: 5.25"
Maximum with Top and Bottom Plates: 6.0"
The top and bottom plates can be removed for larger devices.
Spine Plate Dimensions:
2.5W x 5.0H"
Using Short Arm Side Clamps:
Maximum Depth: 0.75"
Minimum Width: 1.25"
Maximum Width: 3.0"
Using Medium Arm Side Clamps:
Maximum Depth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"
Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
56.47 |
|
|
Universal X-Grip® Flat Surface Mount
The RAM-B-138-UN7U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring loaded X-Grip® holder for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the mount to your optimum viewing position. The included X-Grip® cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip® holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip® is the cell phone holder evolved.
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Features:
Rustproof
High strength composite and stainless steel construction
Spring loaded holder expands and contracts for perfect fit of your device
Rubber coated tips will hold device firm and stable
Socket technology allows for multiple adjustment angles and articulation of device
Lifetime warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum, Marine Grade Stainless Steel Components & High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
46.82 |
|
|
Sure-Grip Flush Mount Mounting Base - Fits 2" Flat Surfaces
This Attwood Sure-Grip Flush Mount can fit 2" flat surfaces and is constructed out of extruded aluminum.
Specifications:
Base: Flush base
Fits: 2” flat surfaces
|
5.00 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300c
The RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
This mount is compatible with the following electronic devices:
Garmin echo 100
Garmin echo 150
Garmin echo 300c
Ball Size:
1" Rubber "B" Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
31.26 |
|
|
RAM® Drill-Down Heavy Duty Mount for weBoost
This weBoost mounting kit includes a 3/8"-24 X .375" threaded RAM® Tough-Ball™ that screws directly into the weBoost antenna, a C size medium length socket arm, and a C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna bracket. The adjustability of the RAM® Mounts system allows you to collapse the antenna while not in use, as well as extend the reach of the weBoost antenna is mounted in a tight space. This weBoost antenna mount is compatible with all weBoost vehicle antennas including the Drive Reach OTR, RV, and Drive X RV antennas making this the ideal mounting solution for off-road vehicles and semi-trucks.
Features:
Kit includes 3/8"-24 X .375" Threaded RAM® Tough-Ball™ that screws into thread adapter of the weBoost antenna, C size medium length socket arm, and C size RAM® Diamond Ball base for flat surface drill-down mounting such as a rear bumper, spare tire carrier, or antenna brackets
The adjustability of the ball and socket technology allows the weBoost mount to collapse when not in use, and provide extended reach in tight mounting areas
Made of powder-coated, marine-grade aluminum for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
HOLE PATTERN: 2-Hole AMPS 1.912"
THREAD PITCH: 3/8"-24 X .375"
PLATE SIZE: 2.43" x 1.31"
BALL/SOCKET SIZE: C Size (1.5")
WEIGHT CAPACITY: Standard Use: 4 lbs, Heavy-Duty Use: 3 lbs
MATERIALS: Marine-grade aluminum, High strength composite
|
45.50 |
|
|
RAM Universal Finger Grip Glare Shield Clamp Mount
Part #: RAM-B-177UN4
The RAM-B-177-UN4 consists of a glare shield clamp base, double socket arm and universal Finger Grip™ holder. Simply locate the clamp on any clamping surface up to 1.12" thick and gently snug the nylon thumb screws. The double ball & socket system will provide perfect viewing angles to get the most from your electronic device. The RAM glare shield clamp with double ball & socket system is far and away the most discrete and clean way to mount most any compact electronic device to the glare shield of your aircraft.
The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5" x 2" hole patterns.
This mount is designed to hold the following devices:
Cell Phones (check measurements below for dimensions)
2-Way Radios
GPS Devices
Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More
Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More
Use on your Motorcycle, ATV, UTV, Car, Boat and More
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
High Strength Composite & Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
70.13 |
|
|
RAM Glare Shield Clamp Mount with Diamond Base Adapter
The RAM-B-177U consists of a double socket arm, glare shield clamp base and diamond base adapter. The RAM-B-177U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
40.08 |
|
|
This RAM high strength composite cradle is designed to hold the following devices:
Garmin Astro 220
Garmin GPS 60
Garmin GPSMAP 60
Garmin GPSMAP 60C
Garmin GPSMAP 60CS
Garmin GPSMAP 60CSx
Garmin GPSMAP 60Cx
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
*The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.
|
8.45 |
|
|
RAM Glare Shield Clamp Mount w/Short Double Socket Arm & Round Base Adapter w/AMPs Hole Pattern
The RAM-B-177-202U consists of a glare shield clamp base, short double socket arm and round base that contains the universal AMPs hole pattern. This mount is designed to mount to the lip edge of a flat surface up to 5/8" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
41.11 |
|
|
RAM Cradle Holder for the Garmin dezl 560LMT & 560LT
This RAM high strength composite cradle is designed to hold the following devices:
Garmin dezl 560LMT
Garmin dezl 560LT
Features:
Open access to all electronic ports including audio port, speaker/mic and mini USB
Patent pending roller design for super smooth placement and removal of the GPS
Custom pocket for factory dock
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.
|
17.59 |
|
|
RAM 1" x 1" U-Channel Clamp with 1" Ball
The RAM-B-259U is designed to mount to the lip edge of a flat surface up to 1" thick. Popular mounting edges include a car side window edge lip or glare shield on an airplance. The base has two composite bolts that, when tightened, clamp the base to the lip surface. A RAM 1" diameter rubber ball is connected to the base allowing you to connect a RAM 1" diamter arm socket and connection plates to create the perfect mount for your application.
Mount will attach to flat surfaces with the following dimensions:
Min: 4.4mm / 0.17"
Max: 28.0mm / 1.12"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.47 |
|