This RAM high strength composite cradle is designed to hold the following devices: Garmin StreetPilot c530 Garmin StreetPilot c550 Garmin StreetPilot c580 Garmin StreetPilot i2 Garmin StreetPilot i3 Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. Notice: THIS MOUNT IS NOT INTENDED FOR HIGH VIBRATION APPLICATIONS SUCH AS MOTORCYCLE OR OFF ROAD USE. FOR HEAVY DUTY APPLICATIONS APPLY PVC PLUMBING GLUE TO RAM-HOL-GA22 ADAPTOR PRIOR TO ASSEMBLY. NOTE: ONCE GLUED THE MOUNT WILL BE PERMANENT.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount. Material: High Strength Composite Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Spine Clip Holder with Ball for Garmin Handheld Devices  With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. For use in nearly any application, the included B size diamond base adapter and hardware allows you to connect your Garmin handheld to any RAM® B size mounting base.  Material: Powder Coated Marine Grade Aluminum Ball Size: B Size 1" Rubber Ball Note: Part number reflects product packaged in a poly bag.

B Size 1" Composite Fishfinder Mount for the Lowrance Hook2 Series Designed for light duty salt water use, this B size (1”) composite drill-down kit for the Lowrance Hook² allows users to swap out the factory mounting solution with a RAM® Mounts solution. Simply attach the included adapter to the Lowrance Hook² and you’re ready to connect the double socket arm and round base featuring the AMPS hole pattern. Made of high strength composite and powder coated marine grade aluminum, this kit is designed to keep your Hook² secure and stable in rugged environments on your kayak or inflatable. Material: High Strength Composite and Marine Grade Aluminum Ball Size: 1" Rubber "B" Ball Size

RAM® Spine Clip Holder for Garmin Handheld Devices With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM® Compatible™. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. Hardware included.  Features: Spine mount adapter for Garmin handheld devices Compatible with diamond ball bases for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Made of high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Compatible Garmin Devices: Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™ Includes: (2) #8-32 x 1/2" Machine Screws (2) #8-32 x 5/8" Machine Screws (2) #8-32 Nylock Nuts Specifications: Hole Pattern (inch): 2-Hole AMPS - 1.912" Weight: 0.08 lb. Materials: High-strength composite

Power-Grip™ Universal Scanner Gun Holder Whether it is a vehicle mounted terminal, tablet or monitor mount, RAM has a full range of solutions to meet the demands of the toughest users. RAM has once again innovated with the Power-Grip™ Universal Scanner Gun Holder. This product is compatible with a wide range of ruggedized 2D barcode scanners and is compatible with RAM's full range of forklift mounting systems, as well as mounting systems for a variety of mounting scenarios. Using a variety of high strength, quality materials, The Power-Grip™ securely locates your 2D barcode scanner while you aren't using it. When required, the 2D barcode scanner easily removes to quickly scan the desired item. The unique open bottom design enables scanning while in the holder. Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required. Backed with RAM's renowned lifetime warranty, the Power-Grip™ Universal Scanner Gun Holder is an essential accessory for your 2D barcode scanner. Internal Dimensions: Width = 3.47" Length = 2.16" Depth = 4.9" Features: Unique open bottom design enables scanning while in the holder Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required Form fitted cradle supports and protects device without vibration  High strength materials ensure product longevity  Integrated lanyard holes Lifetime warranty (excludes fin grips) Included: Power-Grip™ Holder Hardware for attaching to compatible RAM mounts Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. Lifetime warranty includes the Power-Grip™ holder; the elastomeric fin grips are not included in the warranty.

Power-Grip™ XL Universal Scanner Gun Holder The RAM® Power-Grip™ XL universal scanner gun holder is designed for use with several large form factor scanner guns and is RAM® Mounts Compatible™ with a full range of ball and socket forklift mounting systems. Using high-strength composite materials, the RAM® Power-Grip™ XL secures scanner guns even when not in use. When required, easily remove the scanner gun to quickly scan the desired item. This holder features two attachment points. First, the hole pattern on the back of the holder allows for the connection of the RAM-202U or the RAM-D-254U (hardware is included for these attachments). Second, the hole pattern on the bottom of the holder allows for the connection of a 2” x 3” plate – RAM-202U-23 or RAM-D-202U-23 – or a drill-down mount (hardware is not included for these attachments). To enable use on the go, integrated holes on both sides of the holder allow for the use of a lanyard or the GDS® Shoulder Strap. Elastomeric fins grip the handle of the scanner gun to ensure a secure fit, and can be easily replaced if required.  Internal Dimensions: Width = 3.96" Length = 2.66" Depth = 7.43" Features: Unique open bottom design enables scanning while in the holder Replaceable elastomeric fins grip the handle of the scanner tight to ensure the most secure fit, and can be easily replaced if required Form fitted cradle supports and protects device without vibration High strength materials ensure product longevity Integrated lanyard holes Lifetime warranty (excludes fin grips) Included: RAM® Power-Grip XL™ Holder Hardware for attaching to compatible RAM® Mounts Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The holder includes a four of two nuts and bolts to connect to any compatible RAM mounts. 

RAM® Marine Electronics Ball Adapter The RAM-D-115BU, a universal mounting plate, consists of a 2.25" diameter rubber ball, connected at right angles to a flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices. Features: D size ball adapter for 9"-12" fishfinder gimbal brackets RAM® Mounts ball and socket technology allows for near-infinite adjustability Made of Powder-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments Backed by a lifetime warranty Specifications: Plate Size: 6.25" x 2" Ball/Socket Size: D Size (2.25") Weight Capacity: Standard Use: 6 lbs/Heavy-Duty Use: 5 lbs  Materials: Marine-Grade Aluminum Additional Information: The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications, additional holes may need to be drilled for proper fit with your electronic device.

This RAM high strength composite cradle is designed to hold the following devices: Garmin Astro 220 Garmin GPS 60 Garmin GPSMAP 60 Garmin GPSMAP 60C Garmin GPSMAP 60CS Garmin GPSMAP 60CSx Garmin GPSMAP 60Cx Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system. *The RAM-HOL-GA12U RAM cradle requires the standard belt clip button which is included with the purchase of the GPS unit from Garmin.

This RAM high strength composite cradle is designed to hold the following devices: Garmin nuvi 200w Garmin nuvi 205w Garmin nuvi 250w Garmin nuvi 255w Garmin nuvi 260w Garmin nuvi 265wt Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder f/Garmin nüvi 50 & 50 LM Part #: RAM-HOL-GA50U This RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 50 Garmin nüvi 50LM Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Brake Clutch Reservoir Cover Motorcycle Mount (1" Ball Centered) The RAM-B-182U consists of a centered brake/clutch reservoir cover base, double socket arm and diamond adapter base. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the base and cradle. With a twist of the arm knob, you can move the reservoir cover mount to your optimum viewing position. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Cradle Holder for Garmin Montana® Series This RAM high strength composite cradle is designed to hold the following devices: Garmin Montana 600 Garmin Montana 650 Garmin Montana 650t Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag. The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.

RAM Cradle Holder f/Garmin nüvi 2557LMT, 2577LT & 2597LMT This RAM high strength composite cradle is designed to hold the following devices: Garmin nüvi 2557LMT Garmin nüvi 2577LT Garmin nüvi 2597LMT Features: 1. Open access to all electronic ports including audio port, speaker/mic and mini USB 2. Roller design for super smooth placement and removal of the GPS 3. High strength materials ensure product longevity 4. Lifetime warranty Material: High Strength Composite Compatible RAM Components: The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-238U (Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the cradle and RAM mounting system.