|
The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.0625"
Socket-To-Socket Length: 3.1875"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber Ball "D" Size
|
44.42 |
|
|
Description:
The RAP-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
17.64 |
|
|
Low Profile Composite Double Socket Arm
The RAP-B-201U, composite standard double socket arm, has a socket at both ends that accommodates 1" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag
Dimensions:
Overall Length: 2.75"
Socket-To-Socket Length: 2"
|
6.22 |
|
|
RAM Yoke Clamp Mount w/Double Socket Arm & Diamond Base Adapter
Part #: RAM-B-121-238U
Consists of a double socket arm, universal diamond base and yoke clamp base. The hole pattern found on the diamond base will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. The clamp base will accommodate rails in diameter from 0.625" to 1.25". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
42.52 |
|
|
RAM 1.5" Diameter Ball Mount with 2/2.5" Round Bases - AMPs Hole Pattern
The RAM-101U consists of a double socket arm and two 2.5" diameter round bases that contain the universal AMPS hole pattern. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device.
Overall Height:
7.35"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. If you prefer a smaller double socket arm with two round bases, RAM recommends the RAM-B-101U.
|
46.08 |
|
|
RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round Base
The RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.03 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM® Track Ball™ Double Ball Mount with Garmin Spine Clip Holder
The RAM® Spine Clip holder is a mount adapter that easily clips into the integrated spine connection on a wide variety of Garmin devices. This kit is compatible with virtually any track system including the RAM® Tough-Track™ and is easy to install and remove from your vehicle or vessel.
Features:
Kit includes RAM® Spine Clip Holder for Garmin, B size diamond ball base, medium double socket arm, and RAM® Track Ball™ base
The holder secures any Garmin handheld device with an integrated spine connection
Designed for most third-party track mounting systems; compatible with any RAM® Tough-Track™
Backed by a lifetime warranty
Compatible Garmin Devices:
Alpha® 100, Approach® G3, Approach® G5, Astro® 320, Astro® 430, Astro® 900, Dakota® 10, Dakota® 20, eTrex® 10, eTrex® 20, eTrex® 20x, eTrex® 22x, eTrex® 30, eTrex® 30x, eTrex® 32x, eTrex® Touch 25, eTrex® Touch 35, eTrex® Touch 35t, GPSMAP® 62, GPSMAP® 62s, GPSMAP® 62sc, GPSMAP® 62st, GPSMAP® 62stc, GPSMAP® 64, GPSMAP® 64s, GPSMAP® 64sc, GPSMAP® 65s, GPSMAP® 66i, GPSMAP® 66s, GPSMAP® 66st, GPSMAP® 79s, GPSMAP® 79sc, GPSMAP® 86 Series, inReach Explorer®+, inReach® Mini, inReach SE®, Oregon® 200, Oregon® 300, Oregon® 400c, Oregon® 400i, Oregon® 400t, Oregon® 450, Oregon® 450t, Oregon® 550, Oregon® 550t, Oregon® 600, Oregon® 600t, Oregon® 650, Oregon® 650t, Oregon® 700, Oregon® 750, Oregon® 750t, Rino® 610, Rino® 650, Rino® 650t, Rino® 655t, Rino® 700, Rino® 750, Rino® 755t, and Sport PRO™
Includes:
Assembly Hardware
(1) Friction Washer
(1) 1/4"-20 x 7/8" T-Bolt
Specifications:
T-Bolt Dimensions (inch): .48" x .95"
Socket to Socket Length (inch): 3"
Ball Size: B Size (1")
Weight: 0.41 lb.
Materials: High-strength composite
Weight Capacity:
Standard Use: 2 lbs
Heavy-Duty Use: 1 lb
|
27.90 |
|
|
RAM 1" Ball Marine Electronic "LIGHT USE" Mount for the Garmin echo™ 100, 150 & 300c
The RAM-B-101-G4 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
This mount is compatible with the following electronic devices:
Garmin echo 100
Garmin echo 150
Garmin echo 300c
Ball Size:
1" Rubber "B" Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
31.26 |
|
|
1.5" Ball "Rugged Use" Mount f/Garmin echo 200, 500c, & 550c
The RAP-101U-G4 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and round adapter base that attaches directly to the back of the Garmin echo. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Included is hardware that is used to attach the Garmin echo to the RAM Mount.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
39.83 |
|
|
RAM® EZ-Roll'r™ Locking Cradle for Garmin dezl™ OTR700
The RAM® EZ-Roll’r™ cradle for the Garmin dezl™ OTR700 provides a secure fit with hardware to lock the GPS device into place. With the included cradle lock as a theft deterrent, keep the Garmin dezl™ OTR700 protected when left inside the vehicle. Complete your ideal mounting solution by choosing from a wide variety of compatible RAM® Mounts bases and components to connect to the cradle. Included is a set of two nuts and bolts to connect the cradle to any RAM® components or mounts that contain the universal AMPS hole pattern.
Features:
Form-fit cradle designed specifically for the Garmin dÄ“zl™ OTR700, securing your GPS while keeping all buttons and the power port fully accessible
Locks the device in place so it cannot be removed without the use of tools
Made of high-strength composite for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Hardware Included:
Assembly Hardware
(2) #8-32 x 5/8" Machine Screws
(2) #8-32 Nylock Nuts
(2) 4" Cable Ties
Specifications:
Hole Pattern: 2-Hole AMPS: 1.912"
Materials: High Strength Composite
Weight: 0.35lbs
|
18.88 |
|
|
RAM 1" Diameter Ball Mount with 2/2.5" Round Bases & Mounting Hardware for Garmin Fishfinders & GPSMAP Devices
The RAM-B-101-G2U consists of a double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the double socket arm. With a twist of the arm knob, you can move the RAM-B-101-G2U mount to your optimum viewing position.
Color: Black Powder Coat
Ball Size: 1 Inch Rubber Ball
Material: Powder Coated Marine Grade Aluminum
|
30.23 |
|
|
RAM® Track Ball™ Mount for Garmin Striker + More
This RAM® Track Ball™ bundle includes the RAM® Track Ball™, the RAM® Double Socket B Size Arm, and the RAM® Round Plate with Ball & Mounting Hardware for Garmin Striker and other fishfinder models. The RAM® Track Ball™ consists of a B-size 1" rubber ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into virtually any track system. Simply insert or slide the RAM® Track Ball™ into the track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball.
The included RAM-B-201U consists of a medium-length double socket arm that accommodates 1" B-size ball bases, device holders, and adapters. The easy-to-adjust knob allows for near-infinite adjustability for the connected device. The RAM-B-202-G4U consists of a 1"-diameter rubber ball connected to a flat 2.5"-diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern. Included are 3x (#8-32 x 5/8” PH PD Mach Screws) and 3x (#8-32 SS Nylock Nuts) that will connect the RAM-202-G4U to the bottom of the Garmin echo™ and Striker™ 4 Series.
Features:
Designed for track mounting systems including the RAM® Tough-Track™; includes 1" B-size rubber ball
Features a rubber friction washer and a stainless steel T-bolt; simply insert it into the track and twist the ball clockwise to tighten
Standard RAM® double socket arm provides an ideal overall length of 3.73" and a socket-to-socket length of 3"
Made of high-strength composite and steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: (3) #8-32 x 5/8" Machine Screws and (3) #8-32 Nylock Nuts
T-Bolt Dimensions (inch): 0.48" x 0.95"
Socket to Socket Length: 3"
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496"; 3-Hole 120-Degree: 1.812" Diameter
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum and high-strength composite
Packaging Type: Polybag
Weight: 0.4 lbs.
Compatibility:
Garmin: Striker 4, Striker 4dv, Striker Plus 4cv, Striker Vivid 4cv, echo 100, echo 150, echo 300c, ECHOMAP Plus 42cv, ECHOMAP Plus 43cv, ECHOMAP Plus 44cv, ECHOMAP Plus 45cv, and ECHOMAP UHD2 6"
|
33.83 |
|
|
Universal D Size Ball Mount with Short Arm and Hi-Torq™ Wrench for 9"-12" Fishfinders and Chartplotters
The RAM-D-115-C-KNOB9H consists of a base with a 2.25” diameter D size ball, a short arm, a Hi-Torq™wrench and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. For cold weather environments, the included Hi-Torq wrench helps to tighten the knob on the arm for a secure hold. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
Overall Length: 7.325"
Weight Capacity: Up to 10 lbs.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
|
119.57 |
|
|
RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series Fishfinders
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds.
Compatible Devices:
Lowrance Elite-5
Lowrance Elite-5 DSI
Lowrance Elite-5 Gold
Lowrance Elite-5x
Lowrance Elite-5x DSI
Lowrance Elite-5m
Lowrance Elite-5m Gold
Lowrance Mark-5x
Lowrance Mark-5x DSI
Lowrance Mark-5x DSI Portable
Lowrance Mark-5x Pro
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends this adapter base for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
RAM Double Socket Arm for 1.5" Ball Bases
The RAM-201U, standard double socket arm, has a socket at both ends that accommodates 1.5" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Overall Length: 5.625"
Socket-To-Socket Length: 4.5"
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
RAM 2.5" Round Base w/ AMPs Hole Pattern & 1.5" Ball
The RAM-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
|
45.52 |
|