|
RAM Mount Large Tough-Claw Base w/Double Socket Arm & 1.5" Round Base A
dapter
The RAP-401-202U consists of the large Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™: is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 2.25" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 2.25"
Clamping Range (Flat Surfaces):
0" to 2.2"
|
84.79 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
RAM Fork Stem Motorcycle Base with Double Socket Arm and Diamond Base Adapter
The RAM-B-176U consists of a fork stem motorcycle base, double socket arm and diamond base adapter. The diamond adapter base has a hole pattern that matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The fork stem base is one of the cleanest ways to mount small electronics on your motorcycle. Simply slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 -20mm and 28mm or .5 degrees to 1.10 degrees at the following intervals:
Metric Standard
12mm
.5 degrees
14mm
.5 degrees
16mm
.63 degrees
18mm
.71 degrees
20mm
.79 degrees
28mm
1.10 degrees
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. RAM recommends that you review the installation instructions for this part prior to ordering.
|
34.61 |
|
|
Medium Tough-Claw™ Base w/Double Socket Arm & 1.5" Round Base Adapter
The RAP-404-202U consists of the small Tough-Claw™ base, double socket arm and round base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" - 1.875" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
71.12 |
|
|
Medium Tough-Claw™ Base w/Double Socket Arm & Diamond Base Adapter
The RAP-B-404-238U consists of the medium Tough-Claw™ base, double socket arm and diamond base adapter. The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. The diamond base adapter contains the industry standard universal AMPS hole pattern, which will connect to a large variety of RAM Mount and third party cradles. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Specifications/Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty!
Made in U.S.A.
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
46.37 |
|
|
RAM Lil Buddy™ Adhesive Stick Base Dash Mount with Compatible Garmin G-Ball
Minimalists in design yet incredibly useful is the RAM Lil' Buddy mount. Using an adhesive disk, put the Lil' Buddy practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your dash or console is easy. Deciding what you want to mount may be a tough decision though. With so many uses, your iPhone, Blackberry, Palm, or MP3 player can be perfectly matched and supported by your new best friend, the RAM Lil' Buddy. Also, for all you Garmin folks, note that the ball on the Lil' Buddy will snap right into the ball receiver on your GPS.
The Lil' Buddy attaches directly to any Garmin GPS Personal Navigation Device with factory mounting bracket that accommodates the Garmin "G-Ball". This mount rotates 180 degrees.
The RAM Lil' Buddy mount is compatible with the following Garmin GPS Personal Navigation Devices:
nuvi 2xx
nuvi 2xxW
nuvi 3xx
nuvi 6xx series
nuvi 7xx series
nuvi 8xx series
StreetPilot i3
StreetPilot i5
Material:
High Strength Composite
Note:
Purchase of product does not include Garmin GPS device or factory mounting bracket. The "U" in the part number reflects product packaged in poly bag.
|
10.27 |
|
|
RAM 1.5 Inch Ball Base with Strap 0.5 Inch to 2 Inch Diameter
The RAM-108B consists of a 1.5" diameter ball connected to a base with single strap. The strap will accommodate rails from 0.5" to 2" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display.
|
18.88 |
|
|
RAM® No-Drill™ Vehicle Base for 2019 RAM 1500
This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle.
Specifications:
Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board
Drilling Requirements: No - attaches to seat studs
Seat Configuration: Bucket
Pole: Purchased Separately
Material: Powder Coated Steel
|
46.96 |
|
|
RAM® Mount No-Drill™ Laptop Base for '22-23 Toyota Tundra + More
The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit the 2022-2023 Toyota Tundra and 2003-2010 Ford Focus perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the mounting base in the vehicle. Compatible with RAM® Tele-Pole™ mounting systems to complete your in-vehicle solution.
Features:
RAM® No-Drill™ base designed specifically for 2022-2023 Toyota Tundra and more
Compatible with RAM® Tele-Pole™ mounting systems
Made of powder-coated steel
Backed by a lifetime warranty
Specifications:
Hole Pattern (inch): Seat bolt distance-17.75" center to center
Materials: Powder-coated steel
Packaging Type: Box
Weight (lbs): 6.0 lb.
|
35.38 |
|
|
RAM Mount M8 Handlebar Base w/Diamond
Your motorcycle rides on rubber tires for grip and to soften the ride. Why should it be any different for your mounted electronics? With RAM's patented rubber ball and socket technology, the turn of a single knob grips the adjustment arm to a rubber ball designed to dampen shock and vibration. With RAM products, it's all grip and no slip plus protection for your valuable electronics. Simply place our easy to install ball base onto the motorcycle handlebar top clamp and you're done. After that, a world of mounting possibilities just opened up.
Included:
(1 QTY) 1" Rubber Ball
(1 QTY) M8 x 55 bolt (1.25 thread pitch)
(1 QTY) M8 x 60 bolt (1.25 thread pitch)
(1 QTY) M8 x 65 bolt (1.25 thread pitch)
(1 QTY) Standard B Size Arm
(1 QTY) Diamond Base with Ball
Material:
Powder Coated Marine Grade Aluminum
Attachment Point:
Motorcycle handlebar top clamp, any bike that uses an M8 threaded bolt.
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
25.79 |
|
|
RAM 3.68" Diameter Base w/Ball
The (RAM-240U), marine grade aluminum base, consists of a 1.5" diameter rubber ball connected to a flat 3.68" diameter base. This base has pre-drilled holes that connects to RAM Tough-Dock Powered Docking Stations.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.66 |
|
|
RAM® Level Cup™ XL with 1.5" Ball
Designed for bigger insulated cups, plastic water bottles, or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a C-size RAM® Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sizes of cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Specifications:
Drink Size: 12-32 oz
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496"
Ball Size (inch): C Size (1.5")
Weight Capacity (lbs): Standard use: (2 lbs) / Heavy-duty use: (1 lb)
Materials: High-strength composite
Packaging Type: Retail bag
Weight (lbs): 0.67 lb.
Hardware Included:
(3) Rubber Support Fins
(1) Glue Tube for Rubber Fins
|
38.59 |
|
|
Level Cup™ XL w/B Size 1" Ball
Designed for bigger insulated cups, plastic water bottles or even your reliable steel coffee cup, the Level Cup™ XL keeps your drink upright, regardless of the conditions. This kit includes a Level Cup XL with a B-size RAM® Mounts ball directly attached. The oversized opening cradles the biggest of gulps and the adjustable bottom piece moves up and down to accommodate taller cups. The rubber feet flex to fit various sized cups as well. RAM® Mounts has refined the self-leveling action to keep your cups full.
Koozie included with purchase of this product.
Common Beverage Sizes:
12oz Cans
Water Bottles
Insulated Cups
32oz Containers (Nalgene, Pelican, Contingo, Hydro Flask)
Material: High Strength Composite
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Compatible Dimensions:
Width Range: 2.6" - 3.5"
Height Range: 3.75" - 11"
|
34.40 |
|
|
RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Diamond Base Adapter
Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your Apple Touch is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Cutting edge products like the Apple Touch deserve a cutting edge mount and RAM delivers.
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. To see if the (RAM-B-309-1U) base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
|
37.26 |
|
|
RAM Drink Cup Holder w/ Goldwing
Part #: RAM-B-132-309U
Drink Cup Mount Description:
A favorite world wide, the RAM Self Leveling Drink Cup holder will bring a smile to anyone's face when they get it. The perfect accessory for any vehicle including motorcycles, ATV's, Big Rigs, and yes, even your prized riding lawn mower. Easily installed and positions to keep your favorite beverage within reach, this gem even comes with a RAM can insulator. Take a corner as hard as you like, this holder is ready to ride.
Motorcycle Brake/Clutch Reservoir Mount Description:
Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your electronic device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your mobile device. The base fits the control clamps on your motorcycle with either standard or metric thread stainless steel bolts, provided in the kit
Material:
High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
|
42.83 |
|