RAM ROD® Round Flush Base for Spline Posts Features: The RAM-114FMTU consists of a round flush mounting base and a socket compatible with RAM ROD® and RAM-TUBE™ holders with a spline post. Designed to accommodate gunwales up to two inches thick, and seat with no visible hardware, this product is ideally suited to a wide variety of applications. This mounting base is ideal for kayaks and water craft with limited mounting space. Includes a rubber cap for sealing from water when not in use, the included nylon threaded cap seals the bottom.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: Part number reflects product packaged in clear clam shell for store shelf display.

Track Base f/Spline Posts The RAM Track Base for Spline Posts is a rugged track mount solution that’s also ideally suited for use when you’re out on the water. If you’re using the Track Base to mount a rod holder while trolling, it’s a great choice as the Track Base won’t loosen. Compatible with the RAM Tough-Track™, it features two knobs and a hole that allows for the attachment of any RAM Spline Post.  Features: T-Bolt Dimensions: .48" x .95" Material: High Strength Composite   Note: Part number reflects product packaged in retail bag for store shelf display.

RAM-ROD™ Flush Base f/ Spline Posts Description: The RAM-114FMU contains 4 pre-drilled holes and a socket compatible with RAM-ROD™ and RAM-TUBE™ holders with a spline post. Color: Black Material: High Strength Plastic

RAM-ROD™ Bulkhead Vertical Base f/ Spline Posts The RAM-114BMU contains 4 pre-drilled holes and a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. Material: High Strength Composite

RAM POD I Universal No-Drill Vehicle Mount with 18" Flex Rod & Diamond Adapter Base Part #: RAM-B-316-1-238U The RAM POD I, No-Drill vehicle mount, consists of a 1" ball and diamond base with 18" rigid flex rod. The flex rod base is designed to connect to a vehicle seat rail bolt in cars, trucks, fleet vehicles and suvs. The flex rod can hold light to medium weight items in your vehicle safely and securely. Material: High Strength Composite and Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM® Tough-Tube Fishing Rod Holder with 3" Length Spline Post & Round Flush Mounting Base The RAP-394-SSFMTU consists of the TOUGH-TUBE fishing rod holder, a 3" long ratchet spline post arm, and a round flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The round flush mounting base is designed to accommodate gunwales up to two inches thick, and seat with no visible hardware, this product is ideally suited to a wide variety of applications. Once installed, the post spline can be removed and the hole capped making it watertight. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for your next day on the water. Features: Quick release and installation High-strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels The Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom-designed for heavy chop environments Mount virtually anywhere on heavily rigged kayaks without hindrance Material: High Strength Composite Notes: The "U" in the part number reflects the product packaged in a poly bag. Lifetime warranty Made in U.S.A. Specifications: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3"

RAM Tube Jr. Fishing Rod Holder with Standard 4" Length Post Spline Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Fishing Rod Holder with Standard 6" Length Post Spline Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty Post Spline Length: 6" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & Plunger The RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: The "U" in the part number reflects product packaged in poly bag.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM-ROD™ Deck and Track Flat Surface Base w/ Spline Posts The RAM-114DTMU deck and track flat surface base includes a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. The RAM-114DTMU is designed to attach to Tite-Lok track systems with a 3.25" width. Color: Black Material: High Strength Plastic

RAM POD I Universal No-Drill™ Vehicle Mount with 18" Rigid Aluminum Rod & Round Adapter Base The RAM-B-316-1-202U, universal RAM-POD I vehicle mount, consists of a RAM 1" diameter ball and socket system, connected to a 18" long flexible rod. The base consists of a 2.5" diameter round plate with universal AMPS hole patten end. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely. Installation Instructions: At right angles to the base of the flexible 18" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size

RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 4" Post The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 3.75" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 3.75" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ Base is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling. Features: Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops Includes RAM® Tube Jr.™ rod holder with 3.75" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks The locking button prevents the base from spinning loose with rod holder movement Quick-release mechanism for easy installation and removal of rod holder Backed by a lifetime warranty Specifications: T Bolt Dimensions: .48" x .95" Post Length: 3.75" Materials: High-strength composite Packaging Type: Poly Bag Weight: 0.94lbs

RAM-ROD Combination Bulkhead/Flat Surface Base with Plunger for Spline Posts The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Compatible with RAM post and spline rod holders and RAM wedge mount ball adapters. Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.