|
Ram Rod 2000 Deck & Track Base 5 Spot
Color: Black
Material: High Strength Plastic
|
8.57 |
|
|
RAM-ROD™ Deck and Track Flat Surface Base w/ Spline Posts
The RAM-114DTMU deck and track flat surface base includes a socket compatible with RAM-RODT and RAM-TUBET holders with a spline post. The RAM-114DTMU is designed to attach to Tite-Lok track systems with a 3.25" width.
Color: Black
Material: High Strength Plastic
|
16.25 |
|
|
Tough-Tube™ Rod Holder with Track Base
The Tough-Tube™ Rod Holder with Track Base kit is compatible with the RAM Tough-Track™ to provide an ideal fishing rod holder mounting solution. Attach the rod holder using the included track base and RAM ROD® ratchet attachment. The track base’s tether point secures your rod holder while the adjustable ratchet attachment allows for multiple angles, keeping you in control out on the water.
Features:
1. Quick release and installation
2. High strength materials ensure product longevity
3. Compatible with spinning reels and level wind reels
4. Ratchet system allows for multiple articulation points
5. Lanyard tie points for extra security
6. Custom designed for heavy chop environments
7. Mount virtually anywhere on heavy rigged kayaks without hinderance
8. Lifetime warranty
9. Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
Part number reflects product packaged in retail bag for store shelf display.
Weight:
1.05 lbs.
|
22.42 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
Ram Rod 2000 Holder Unpackaged With Deck & Track Mount
The RAM-114-DU, high strength composite fishing rod holder with deck track base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Features:
Material: High Strength Composite
Fishing Recommendations: The primary intention of this mount is for either fresh or salt water usage
|
31.39 |
|
|
RAM-Rod Light-Speed holder with deck track base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle.
Additional Features
Unique design offers quick and easy removal and replacement of rod.
Simple and easy adjustment allows for tilting up and down as well as upright for rod storage
Unique design integrates removing the rod and setting the hook seamlessly, equaling less missed fish strikes.
Lifetime Warranty
Made in the USA
Fishing Recommendations:
The primary intention of this mount is for either fresh water or salt water usage.
Material:
High Strength Composite
|
57.47 |
|
|
RAM Large Cable Manager f/2.25" Diameter Ball Bases
The RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of glass filled nylon which has the benefit of creating a barrier between the RAM Surface Mount and the attachment area; minimizing vibration while reducing fiberglass and gel-coat damage.
Compatible RAM Mounts:
Compatible with all 2.25" diameter ball bases that contain a three hole, 120 degree hole pattern.
Material:
High Strength Composite and Glass Filled Nylon
IMPORTANT:
To prevent galling of threads during assembly, it is imperative that all threads are lubricated with oil prior to assembly.
Note:
The "U" in the part number reflects product packaged in poly bag. RAM ball base not included with purchase.
|
18.47 |
|
|
RAM 1" Diameter Ball Double Socket Arm with 2.5" Round Base that contains the AMPs Hole Pattern
Part #: RAM-B-103U
The RAM-B-103U consists of a 2.5" round base and double socket arm that will accept 1" ball bases. The round base contains pre-drilled holes, including the universal AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both ends of the socket arm; this with a twist of the arm knob allows for you to maneuver the mount to your optimum viewing position.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
20.33 |
|
|
RAM Motorcycle 1" Ball Adapter for Brake/Clutch Reservoir Base
This ball connects to the open hole on the side of the RAM-B-309-1U (single 1" ball) and is included with the purchase of the RAM-B-309-2U (double 1" ball).
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.40 |
|
|
RAM Composite Double Socket Mount Short Arm & with 2/1" Ball Diamond Bases
The RAP-B-102U-A consists of a short double socket arm and two 1" ball diamond bases. The diamond bases contain two holes 1.912" from center to center, positioned at both ends. The hole pattern found on the diamond plate will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
15.85 |
|
|
RAM Tube 2000 Holder with Deck Track Mount
Description:
The RAM-301-DU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and deck mounting base. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water
Tube Dimensions:
Inner Diameter: 1.94"
Length: 10.0"
Height: 10.75"
Width: 4.5"
Material:
High Strength Composite
Fishing Recommendations:
The primary intention of this mount is for either fresh water or salt water usage.
|
34.48 |
|
|
RAM-ROD® 2000 Fishing Rod Holder with RAM-ROD® Revolution Ratchet/Socket System and Track Ball™Base
The RAM-114-RB-TRA1U consists of the RAM-ROD® 2000 fishing rod holder, ratchet arm with single open socket and 1.5" Track Ball™ base for any track system including the RAM Tough-Track™. The unique ball and socket with ratcheting feature allows for 360-degree rotation of the rod holder for optimal angle adjustments while on the water.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag
|
32.27 |
|
|
RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 6" Post
The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 6" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 6" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling.
Features:
Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops
Includes RAM® Tube Jr.™ rod holder with 6" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks
The locking button prevents the base from spinning loose with rod holder movement
Quick-release mechanism for easy installation and removal of rod holder
Backed by a lifetime warranty
Specifications:
T Bolt Dimensions: .48" x .95"
Post Length: 6"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 1.02lbs
|
27.71 |
|
|
RAM® Tube Jr.™ Holder with Universal Adapt-A-Post™ Track Base - 4" Post
The RAM® Universal Adapt-A-Post™ with RAM® Tube Jr.™ and 3.75" Spline Post combines both the revolutionary RAM® Universal Adapt-A-Post™ Track Base and the RAM® Tube Jr.™ with 3.75" spline post. The RAM® Universal Adapt-A-Post™ is compatible across the post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops. This version of the RAM® Universal Adapt-A-Post™ Base is a track base compatible with RAM® Tough-Track™ as well as most third-party track systems. Each RAM® Universal Adapt-A-Post™ features a quick-release button to safely disengage the rod holder as well as keep it secure while fishing out on the water. The RAM® Universal Adapt-A-Post™ Base also contains a locking lever used to prevent the base from spinning loose with any rod holder movement. Conversely, you can adjust the position of the base along the track by lifting the lever, loosening the base, and repositioning without loosening the rod holder. RAM® Tube Jr.™ supports right and left-handed handling.
Features:
Universal post and spline base compatible with post and spline systems from RAM® Mounts, Scotty, Fish-On, Railblaza, Cannon, Brocraft, Cabela's, and Bass Pro Shops
Includes RAM® Tube Jr.™ rod holder with 3.75" spline post; track base is compatible with all versions of RAM® Tough-Track™ and most third-party tracks
The locking button prevents the base from spinning loose with rod holder movement
Quick-release mechanism for easy installation and removal of rod holder
Backed by a lifetime warranty
Specifications:
T Bolt Dimensions: .48" x .95"
Post Length: 3.75"
Materials: High-strength composite
Packaging Type: Poly Bag
Weight: 0.94lbs
|
26.16 |
|
|
RAM-ROD™ Rod Holder with Spline Post, Extension Arm and Track Base
This track mounting solution includes the high strength composite RAM-ROD™ fishing rod holder and is compatible with the RAM Tough-Track™. An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. With the Ratchet Attachment and Extension Arm, you’ll have plenty of room to take advantage of the RAM-ROD’s tilting cradle and ability to rotate 360°.
Features:
Material: High Strength Composite
T-Bolt Dimensions: .48" x .95"
Note: Part number reflects product packaged in retail bag for store shelf display.
|
34.50 |
|