RAM-ROD™ 2000 Fishing Rod Holder with Flush Mounting Base The RAM-114-FU, high strength composite fishing rod holder with flush base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Features: Material: High Strength Plastic Color: Black

RAM-TUBE™ 2000 Holder w/ Flush Mounting Base Description: The RAM-301-FU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and flush mounting base. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Tube Dimensions: Inner Diameter: 1.94" Length: 10.0" Height: 10.75" Width: 4.5" Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage.

Ram Rod 2000 Holder Unpackaged With Deck & Track Mount The RAM-114-DU, high strength composite fishing rod holder with deck track base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Features: Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh or salt water usage

Ram Rod Unpackaged 2000 Holder With Bulkhead Mount The RAM-114-BU, high strength composite fishing rod holder with bulkhead base, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Features: Material: High Strength Composite Finishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage

RAM-TUBE 2000 Holder w/RAM-ROD Revolution Ratchet/Socket System & 5 Spot Mounting Base Adapter Material: High Strength Composite Color: Black

RAM Universal X-Grip Cell Phone Holder w/1" Ball Part #: RAM-HOL-UN7BU Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you've found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle. Compatible Devices: Apple iPhone 4S WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 4 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3G WITH OR WITHOUT Bumper, Skin or Case Apple iPhone 3 WITH OR WITHOUT Bumper, Skin or Case Apple iPhone (1st Generation) Apple iPod touch (All Models) Apple iPod (G1-G5) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 0.875" (Devices at 0.875" must be a minimum of 4" in height to fit into holder) Maximum Width = 3.25" Depth = 0.875" Features: 1. Spring loaded holder expands and contracts for perfect fit of your device 2. Rubber coated tips will hold device firm and stable 3. Versatility of holder allows for attachment to many RAM-to-RAM ball mounts 4. Single socket technology allows for multiple adjustment angles and articulation of device Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

Tough-Charge™ Waterproof Wireless Charging Holder with Charger The RAM® Tough-Charge™ with X-Grip® Technology is the world's first patented, universal waterproof wireless charging cradle for phones. Designed with spring-loaded RAM® X-Grip® Technology, this cradle features an 'X' design that expands and contracts to secure nearly any phone while taking advantage of Qi wireless phone charging. All four arms feature rubber-coated caps that hold your phone firmly in place, and the open design keeps buttons and switches accessible on the sides of phones. To insert your device, simply squeeze the arms on one side of the cradle and place your phone inside before releasing the arms. This Qi wireless charging cradle ensures your compatible phone charges no matter what position it’s placed at. For added security and peace of mind, a device tether is included that’s recommended for outdoor applications. In addition, a support leg can be adjusted to the ideal position or removed altogether. This RAM® Tough-Charge™ with X-Grip® Technology wireless charging kit for motorcycles includes a B size diamond base featuring a 1” rubber ball – perfect for attaching to your choice of B size RAM® double socket arm. The connected Type-A male pigtail connector features an in-line switch that allows you to turn off the wireless charging module when not in use. For in-vehicle charging, attach the pigtail to the included 1.2m Type-A male to Type-A female extension cable. This kit includes a hardwire charger. Features: Waterproof Qi wireless phone charging cradle features spring-loaded RAM X-Grip technology Kit for motorcycles includes wireless cradle, B size diamond ball base, extension cable, and hardwire charger; attaches to B size double socket arms Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite for durability and reliability in the most demanding environments RAM Mounts backed by lifetime warranty, RAM electronics backed by 1-year warranty Specifications: Hardware Included: (1) Safety Tether, (1) Glue Tube for Rubber Caps, (1) Cradle Leg, (1) Cradle Leg Cover, (1) Silicon sleeve for USB waterproof connection, (1) 1.2 Meter USB Extension, Cable Holder Dimensions: Width Range: 2.375" - 3.25", Depth Range: .875" max  Ball/Socket Size: B Size (1") Materials: High strength composite stainless steel

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Tube 2000 Holder with Bulkhead Mount Description: The RAM-301-BU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and bulkhead mounting base for vertical surfaces. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Tube Dimensions: Inner Diameter: 1.94" Length: 10.0" Height: 10.75" Width: 4.5" Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage.

RAM-Rod Light-Speed holder with flush base, is a must have for the fishing enthusiast. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Additional Features Unique design offers quick and easy removal and replacement of rod. Simple and easy adjustment allows for tilting up and down as well as upright for rod storage Unique design integrates removing the rod and setting the hook seamlessly, equaling less missed fish strikes. Lifetime Warranty Made in the USA Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage. Material: High Strength Composite

RAM Tube 2000 Holder with Deck Track Mount Description: The RAM-301-DU consists of the RAM-TUBET 2000 fishing rod holder, 6" long ratchet spline post arm and deck mounting base. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water Tube Dimensions: Inner Diameter: 1.94" Length: 10.0" Height: 10.75" Width: 4.5" Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage.

RAM® Tough-Tube™ Rod Holder with Flush Base The RAP-394-SSFU consists of the Tough-Tube™ fishing rod holder, a 2" long ratchet spline post arm, and a square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for the next day on the water. Specifications: Product Dimensions: 2 in. post length  Tube Dimensions: Inside Diameter: 1.9"; Inside Length: 10" Hole Pattern: 1.3" x 3.19 inches Materials: High-strength composite Packaging Type: Polybag Weight: 1.15 lbs.

Ram Rod 2007 Holder With Base RAM designs fishing rod holders like nobody else. Take a look at the original RAM ROD series released in the year 2000. This unique concept did a whole lot more that just support a fishing rod. Allowing a quicker response to strikes and elevating the rod to a comfortable height spelled success for Fisherman everywhere. Keeping with that tried and true design, RAM now offers the RAM Rod 2007 series. Ideally suited for vessels as small as kayaks, to larger Tournament or Charter boats, this new line of products is guaranteed to please. Incorporating our one of a kind and ball and socket feature, perfect adjustment is a breeze and setting the hook could not be faster. When it comes to price, form, function, and don't forget fun, RAM is the one to get the job done! Features: Dimensions: Inner Diameter (ID) = 1.475, Length (L) = 9.25, Height (H) = 7.5, Width (W) = 3.18 Material: High Strength Composite Fishing Recommendations: The primary intention of this mount is for either fresh water or salt water usage

RAM Tough-Tube Fishing Rod Holder w/3" Long Ratchet Spline Post Arm The RAP-394-SSTU consists of the TOUGH-TUBE fishing rod holder and 3" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAP-394-SSTU to your existing spline post base, or choose from an assortment of RAM compatible bases. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: The "U" in the part number reflects product packaged in poly bag.