Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Ram Rod Revolution Salt Water Rod Holder Unlike anything you've seen before, and performance beyond your expectations describes another great product for "Pros and Joes" alike. Integrating two sought after features into a single system makes this new Rod Holder versatile to the extreme. Offering not only the RAM Rubber Ball and Socket Feature, but a ratcheting feature as well, there is literally no limit to where this holder can be put or how it can be fished. With RAM, you're never limited by your mounting equipment. No matter whether you're on the water to lose stress, or gain tournament dollars, RAM Rod Holders only add to your success. Features: Material: High Strength Composite and Stainless Steel; this preventing rust of the mount Fishing Recommendations: The primary intention of this mount is for salt water usage

RAM® Tube Jr.™ Rod Holder with Revolution Arm & RAM® Tough-Claw™ Base Ideally suited for a wide range of applications and fishing vessels, the Tube Jr.™ Fishing Rod Holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM ROD® Revolution Ratchet Arm and 1.5” Tough-Claw™. Combining the RAM® rubber ball and socket system with a ratcheting feature, this rod holder has almost unlimited adjustability and configuration options. Easily collapse a spinning reel or bait caster down on the deck to clear the casting path or articulate over the water. Compatible with virtually any kayak and the OtterBox Venture Cooler. Specifications: Clamp Range (inches): 1" - 1.6" diameter Ball Size: C Size (1.5") Weight Capacity: Standard Use: 4 lbs; Heavy-Duty Use: 3 lbs Materials: High-strength composite Packaging Type: Polybag Weight: 1.68 lbs.

RAM-Rod Light-Speed holder with RAM rubber ball, 2.5" round diameter base and ratcheting feature. Designed to mount onto a horizontal surface in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Additional Features: Unique design offers quick and easy removal and replacement of rod. Simple and easy adjustment allows for tilting up and down as well as upright for rod storage. Unique design integrates removing the rod and setting the hook seamlessly, equaling less missed fish strikes. Lifetime Warranty Made in the USA Fishing Recommendations: The primary intention of this mount is for salt water usage. Material: High Strength Composite and Powder Coated Marine Grade Aluminum

RAM Tube Jr. Rod Holder Description: Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Post Spline Length: 6" Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A. Ram Adapt-A-Post™ Quick Release Track Base The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!

RAM Tube Jr. Rod Holder Description: Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Post Spline Length: 4" Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A. Ram Adapt-A-Post™ Quick Release Track Base The RAM Adapt-A-Post™ Quick Release Track base is available to mount the full line of RAM Post and Spline rod holders, for your heavier fishing rod set-ups. Designed to accommodate most kayak tracks, quickly fasten and adjust the base to your existing track system or add a track system to your kayak set up. Popular tracks include Yakattack's GearTrac System, Wilderness Systems SlideTrax and common T-Slot Track Systems. To adjust, simply depress the release buttons and turn the Adapt-A-Post™ counter-clockwise. The base will slide along the track, giving you the ultimate flexibility in repositioning your rod holder or mounted device. The RAM Quick Release Track base can be installed at any point along the track without the need to feed in from one end of the track. A necessity for all fishing enthusiasts, the RAM Quick Release Track Base is certain to create more mounting options on whatever you choose to take to the water. Compatible Tracks: YakAttack GearTrac, Wilderness Systems SlideTrax, Most Common T-TracksScotty Slide Track, Many More!

RAM-ROD 2000 Fishing Rod Holder with 6" Spline Post (No Base) The RAM-114-NB, high strength composite fishing rod holder and 6" spline post, is a must have for the fishing enthusiast. Designed to mount vertically in your boat, you can rotate the rod holder 360 degrees, while tilting the cradle forward and back for the optimum angle. Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM Tube Jr. Fishing Rod Holder with Short 4" Length Post Spline & Flush Mounting Base Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Base Description: The flush mounting base contains 4 pre-drilled holes and a socket compatible with RAM-ROD and RAM-TUBE holders with a spline post. Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Rod Holder Description: Ideally suited for a wide range of applications and fishing vessels, this rod holder is quickly becoming known as the most versatile rod holder on the market. This configuration includes the RAM-ROD™ Revolution ratchet arm with single open socket and 2.5" diameter round base with 1.5" ball. Combining the patented RAM rubber ball and socket system with a ratcheting feature; this rod holder has almost infinite adjustability and configuration options. Easily collapse the rod holder down on the deck for clearing your casting path or articulate over the water, and out of the boat or kayak. Rod holder doubles as a stake out pole holder. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty 8. Made in the U.S.A.

RAM Tube Jr.™ Rod Holder with Spline Post, Extension Arm and Track Base This track mounting solution includes the versatile RAM Tube Jr.™ fishing rod holder (RAP-390-NPU) and is compatible with the RAM Tough-Track™. An excellent addition to the left side of your boat, the Track Base is designed to not loosen while trolling. Features: Quick release and installation High strength materials ensure product longevity Compatible with spinning reels and level wind reels Position spinning reel to the side or under RAM Tube Jr. Compatible with left-handed and right-handed reels Lifetime warranty T-Bolt Dimensions: .48" x .95" Made in the U.S.A. Material:  High Strength Composite  Note: Part number reflects product packaged in retail bag for store shelf display.

RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Features: Quick release and installation High strength materials ensure product longevity Compatible with all RAM & 3rd party post spline bases Compatible with spinning reels and level wind reels Ratchet system allows for multiple articulation points Lanyard tie points for extra security Custom designed for heavy chop environments Mount virtually anywhere on heavy rigged kayaks without hinderance Lifetime warranty Made in U.S.A. Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Post Spline Length: 3" Material: High Strength Composite Notes: Part number reflects product packaged in clear clam shell for store shelf display.

RAM-TUBE 2000 Holder with 6" Long Spline Post (No Base) The RAM-301-NB consists of the RAM-TUBE 2000 fishing rod holder and 6" long ratchet spline post arm. The ratcheting feature allows for the tube to tilt forward and back for optimum angles. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water. Easily integrate the RAM-301-NB to your existing spline post base, or choose from an assortment of RAM compatible bases. Tube Dimensions: Inner diameter: 1.9" Inner tube length: 10" (from bottom to top of lip) Material: High Strength Composite Note: Part number reflects product packaged in clear clam shell for store shelf display.

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

RAM Tube Jr. Fishing Rod Holder with Standard 6" Length Post Spline Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty Post Spline Length: 6" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.

RAM Tube Jr. Fishing Rod Holder with Standard 4" Length Post Spline Before you catch a Fish, you need to catch a RAM! Our latest entry into our diverse fishing rod holder line of products is the RAM Tube Jr. Right or left-handed, spinning reel or level wind, this holder can do it all. Ideally suited for a wide range of uses and vessels, this holder is great for the family that fishes together or a fleet of Kayaks needing a single yet versatile rod holder for everyday use. Features: 1. Quick release and installation 2. High strength materials ensure product longevity 3. Compatible with all RAM post spline bases 4. Compatible with spinning reels and level wind reels 5. Position spinning reel to the side or under RAM Tube Jr. 6. Compatible with left-handed and right-handed reels 7. Lifetime warranty Post Spline Length: 4" Material: High Strength Composite Note: The "U" in the part number reflects product packaged in poly bag.