|
RAM® Double Ball Adapter with 1/2" NPT Threaded Hole
Specifications:
Ball Size: C Size (1.5")
Weight Capacity: Standard Use: 4lbs, Heavy-Duty Use: 3lbs
Materials: Marine-grade aluminum
Packaging Type: Poly Bag
Weight: 0.4 lbs
|
26.87 |
|
|
RAM® Ball Adapter with 1/2" NPT Hole & Tightening Knob
The RAM-330U consists of a 1.5" Diameter Ball, attached to a clamp base with a hole for 1/2" NPT pipes.
Features:
Hardware Included: Assembly Hardware
Ball Size: c Size (1.5")
Weight Capacity: Standard Use: 4 lbs/Heavy-Duty Use: 3 lbs
Materials: Marine-grade aluminum
Weight: 0.35lbs
|
49.93 |
|
|
RAM® Ball Adapter with 1/4" - 20" Threaded Hole and Hex Post - C Size
The RAM-337U includes a 1/4"-20 female thread hex hole connected to a 1.5" rubber ball.
Specifications:
Thread Pitch (inch): 1/4"-20 x 1/2" (female)
Ball Size (inch): C Size (1.5")
Materials: Marine-grade aluminum
Packaging Type: Polybag
Weight: 0.14 lb.
Weight Capacity:
Standard Use: 4 lbs
Heavy-Duty Use: 3 lbs
|
13.16 |
|
|
Standard Double Socket Arm, Long Double Socket Arm & Double Ball Adapter for 1" Balls
Consists of a STANDARD LENGTH double socket arm, LONG LENGTH double socket arm and double ball adapter that joins the two arms together. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Dimensions:
Standard Double Socket Arm Overall Length: 3.69"
Long Double Socket Arm Overall Length: 6"
Double Ball Adapter Ball Center to Ball Center: 1.75"
Specs & Features
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag
Weight:0.94lbs
|
46.99 |
|
|
RAM® Ball Adapter with 3/8"-16 Threaded Post
The RAM-B-236-SEC1U consists of a 1" rubber ball connected to a 3/8"-16 threaded post. The thread length is 0.4".
Specifications:
Material: Powder Coated Marine Grade Aluminum
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects the product packaged in a polybag.
Weight: 0.05 lbs.
|
7.62 |
|
|
RAM 1/4" NPT Female Threaded Hole Base w/Post & 2 1" Balls
Color: Black Powder Coat
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1 inch Rubber Ball
|
29.52 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Short Double Socket Arm & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149ZA-C1U
The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.
|
36.77 |
|
|
RAM® Ball Adapter with 1/4"-20 x 1/2" Threaded Stud
The RAM-B-273-1U consists of a 1" rubber ball connected to a 1/4"-20 x 0.5 threaded post.
Specifications:
Hardware Included: (1) 1/4"-20 x 1" Set Screw
Ball Size: B Size (1")
Weight Capacity: Standard Use: 2 lbs, Heavy-Duty Use: 1 lb
Materials: Marine-grade aluminum
Packaging Type: Polybag
Weight: 0.08 lbs
|
10.06 |
|
|
Straight Side Mount Transom Rod or Console Rod Holder 8-1/2"
Features:
4 hole 3" x 4-1/2" brushed pad
Constructed of cold drawn anodized aluminum
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.24 |
|
|
Bosworth 400-H-Ale-1/2"F Guzzler 1/2" Hand Pmp,Tappd
Bosworth Hand Diaphragm Pump Guzzler Delrin, .44Qt per Stroke, 1/2" Female Threaded Ports, Buna Flapper Valves and Diaphragm, Horizontal Handle with Epoxy Coated Aluminum Clamp Ring for Durability
|
108.13 |
|
|
Fill-Rite 901-1 1/2 Flow Meter
Fill-Rite Flow Meter 6-40GPM Nickel Plated 1 1/2”FNPT Ports
|
465.21 |
|
|
Fill-Rite 901-N-1 1/2 901 Meter Nickel Plated 1.5
Fill-Rite Flow Meter 6-40GPM 1 1/2"FNPT Ports
|
548.25 |
|
|
Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates
This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four pre-drilled holes at each corner with 1.5" x 1.188" hole spacing. These bases attach directly to the included short double socket arm. Take advantage of the RAM® double ball and socket system for near-infinite adjustability to achieve a perfect viewing angle for your mounted device.
Dimensions:
Overall Height: 4.1"
Material: High-Strength Composite
Ball Size: B Size 1" Rubber Ball
Note: The "U" in the part number reflects product packaged in poly bag.
|
16.27 |
|
|
Leash Plug Adapter w/1.5" Diameter Ball
The 1.5" diameter ball leash plug adapter will attach to most SUP/surfboards, as well as after-market plugs. With the simple twist of the base, quickly secure the plug adapter to the board. Add a RAM arm or fishing rod/tube holder to complete your custom SUP mount. High strength composite and stainless steel construction assures a long life of trouble free use in a wide variety of environments including marine and salt water.
Material:
High Strength Composite & Stainless Steel
Ball Size
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
6.00 |
|
|
RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball
The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.28 |
|