8" Upper Flange Pole with D Size 75x75mm VESA Mount This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup. Features: Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 6.7 lb.

12" Upper Flange Pole with D Size 75x75mm VESA Mount This 12" Upper Flange Pole consists of a 12" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with the specific vehicle, enabling a rugged mobile office setup. Features: Pair this 12" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 7.49 lb.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

50mm x 100mm Half VESA Plate Adapter with D Size 2.25" Ball The RAM-D-243U consists of a 2.25" diameter rubber ball, connected at right angles to a square 2.81" x 5" plate. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.8 lbs.

RAM Double Swing Arm with 8" Male Tele-Pole™, 9" Female Tele-Pole™ & 2.5" Round Base (AMPs Hole Pattern) Description The RAM RAM-VP-SW1-89, combination swing arm/tele-pole system, will connect to any RAM vehicle base without a welded female tele-pole. Included is a tele-pole with a height range from 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the tele-pole becomes a rigid support for any RAM cradle, holder or Tough-Tray. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your laptop, tablet, UMPC, monitor, or any other connected electronic device, when mounted on your RAM Vehicle Mount. Taking the highly successful RAM Vehicle Mounts to the next level, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: Part number reflects product packaged in clear clam shell for store shelf display.

Forklift Overhead Guard Plate with D Size 2.25" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three popular ball sizes: 1.5", 2.25 & 3.68" diameter may be attached to this plate system. Up to 2 balls may be attached to the same plate for multiple applications. Features: Hole Patterns: AMPS 4-Hole Pattern 100 x 100 VESA Pattern 75 x 75 VESA Pattern Installation is as easy as attaching the base with ball to one of the plates and then sandwiching the guard or cage between the two mounting plates using the hardware provided. Material: Powder Coated Marine Grade Aluminum Weight: 8.6 lbs.

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in Diameter The RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in diameter. Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" D-Size Ball Note: The "U" in the part number reflects product packaged in poly bag. This mount includes zinc coated u-bolts for preventing rust of the mount and black cover caps to be placed over the exposed ends of the u-bolt. Weight: 0.54 lbs.

RAM® Tough-Claw™ Trolling Motor Stabilizer - C Size Medium  Ideal for stabilizing trolling motors, the RAP-400-202U consists of the small RAM® Tough-Claw™ base, C size medium-length double socket arm, and a round base adapter. The RAM® Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, and odd-shaped rails, and bars. The RAM® Tough-Claw™ can be clamped on rails from 0.625" - 1.14" outer diameter. The round base adapter contains the industry standard universal AMPS hole pattern. This mount is designed with RAM® C size 1.5" diameter patented ball and socket system that has adjustment points at both ends of the double socket arm, allowing for almost infinite adjustment and perfect viewing angles. Features: Includes a small version of the RAM® Tough-Claw™, medium length C size RAM® double socket arm, and 2.5" round plate with C size 1.5" RAM® rubber ball A small version of the RAM® Tough-Claw™ base is designed to quickly clamp to round, square, and odd-shaped rails and bars ranging from .625" to 1.14" in outer diameter; rubber pads provide stable gripping and protection of mounting surface Made of powder-coated, marine-grade aluminum and high-strength composite for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Clamp Range (inch): 0.625" - 1.14" diameter Socket to Socket Length (inch): 4.66" Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size: 2.5" Diameter Ball Size (inch): C Size (1.5") Materials: Marine-grade aluminum, High strength composite Packaging Type: Polybag Weight: 2.19 lb. Weight Capacity:  Standard Use: 4 lbs  Heavy-Duty Use: 3 lbs

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base with C Size 1.5" Ball The RAM® Torque™ handlebar and rail mounting base has a 1.5” rubber ball and accommodates bars 1-1/8” to 1-1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. Mounting Base Dimensions: Accommodates rails 1 1/8" to 1 1/2" in diameter Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball "C" Size Note: The "U" in the part number reflects product packaged in poly bag.

Torque™ 1-1/8" - 1-1/2" Diameter Handlebar/Rail Base w/1" Ball, Medium Arm & Diamond Ball Plate Take your mobile entertainment on the road with the RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 1 1/8" to 1 ½” in diameter with a standard length double socket arm and B-sized ball and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 1-1/8" to 1-1/2" in diameter Features: Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.64 lbs

Double Ball Mount with Backing Plate This mount consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern, a 2.10" x 2.60" backing plate, and mounting hardware. The mount is designed with a 1" diameter rubber ball and socket system that features adjustment points at both ends of the double socket arm, allowing for near-infinite adjustability for ideal viewing angles. Features: 2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases 2.5 in. round plate with a B-size 1 in. RAM® rubber ball connects to RAM® device holders containing the universal AMPS hole pattern; includes a B-size medium-length double socket arm Made of stainless steel and high-strength composites for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 5" Socket to Socket Length (inch): 3” Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Plate Size (inch): 2.5" Diameter, 3" x 3" Square Plate Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and stainless steel Weight: 0.79 lb.

Drill-Down Dashboard Ball Base with Backing Plate - B Size Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1" B-size rubber ball connected to a 2.5" diameter round plate with the universal AMPS hole pattern and one 2.10 x 2.60 in. steel backing plate (hardware included).  Connect a B-size RAM® double socket arm and device holder that's perfect for the use case. RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device. Features: 2.5 in. round plate with a B-size 1 in. rubber ball connects to the included 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern Connect a B-size RAM® double socket arm and device holder for your use case; ball and socket technology allows for near-infinite adjustability Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Product Dimensions (inch): Overall Height: 5.225" Socket to Socket Length (inch): 2.5” Hole Pattern: Round Plate:, 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): B size (1”) Weight Capacity: The standard use is 2 lbs. and the heavy-duty use is 1 lb. Materials: Marine-grade aluminum and steel Weight: 0.42 lb.

Drill-Down Dashboard Ball Base with Backing Plate - C Size Meet the new go-to mount and component option for pairing any holder or dock with a dashboard drill-down mount. This part consists of a 1.5 in. C-size rubber ball connected to a 2.5 in. diameter round plate with the universal AMPS hole pattern and one 2.10 x 2.60 in. steel backing plate (hardware included). Connect a C-size RAM® double socket arm and device holder that's perfect for your use case. RAM®'s patented rubber ball and socket technology dampens shock and vibration and allows for near-infinite adjustment, enabling the perfect viewing and operating angle of your device. Features: 2.5 in. round plate with a C-size 1.5 in. rubber ball connects to the included 2.10 x 2.60 in. steel backing plate that connects to RAM® components containing the universal AMPS hole pattern Connect a C-size RAM® double socket arm and device holder for your use case; ball and socket technology allows for near-infinite adjustability Components made of powder-coated, marine-grade aluminum, and steel for durability and reliability in the most demanding environments Backed by a lifetime warranty Specifications: Hardware Included: (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Machine Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers Hole Pattern: Round Plate: 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter Ball Size (inch): C size (1.5”) Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs. Materials: Marine-grade aluminum and steel Weight: 0.5 lb.

RAM Mount 1.5 Inch Ball Double Socket Arm with 2.5 Inch Round Base The RAM Mount RAM-103U mount, with standard arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 8.55 lb.