Tele-Pole™ with 8" & 9" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of a 9" lower pole, an 8" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of the connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 8.55 lb.

Ram Mounts Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.   If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.

Tele-Pole™ with 12" & 18" Poles & 75mm VESA Mount This RAM® Tele-Pole™ consists of an 18" lower pole, a 12" upper pole, a double swing arm, and a 75x75mm VESA Plate. The lower Tele-Pole™ will attach to all RAM® vehicle bases that do not contain a welded female Tele-Pole™. The combined height of the Tele-Poles™ can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices, allowing you to twist and tilt the viewing and operating angles of the connected device. Features: Pair this RAM® Tele-Pole™ with a RAM® vehicle base that does not contain a welded female Tele-Pole™ Easily adjust the height of the Tele-Poles™ with the turn of a knob, allowing you to twist and tilt the viewing and operating angles of your connected device Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware - (4) 5/16"-18 x 1" Carriage Bolts, (4) 5/16"-18 Hex Nuts, (4) 5/16" Flat Washers, (4) 5/16" Split Lock Washers, and (4) Rubber Caps Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): Tele-Pole 2.625" x 2.625" / VESA Plate: 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 9.73 lb.

8" Upper Pole with Double Swing Arms & 75 x 75mm VESA Plate The RAM-VP-SW1-8-2461 consists of a 8" upper male Tele-Pole™, double swing arm and 3.625" square base that contains the VESA hole pattern. The Tele-Pole™can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The Tele-Pole™ will connect to any RAM vehicle base with a welded female Tele-Pole™. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12". The 3.625" square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge.  Specifications: Material: Powder Coated Marine Grade Aluminum Ball Size: C Size 1.5" Rubber Ball Note: Part number reflects product packaged in clear clam shell for store shelf display

RAM® Tele-Pole™ with 12" & 18" Poles, Double Swing Arms & Round Plate The RAM-VP-SW1-1218 consists of a 18" lower female Tele-Pole™, 12" upper male Tele-Pole™, double swing arm and 2.5" round base that contains the universal AMPs hole pattern. The lower female Tele-Pole™ will attach to all RAM vehicles bases that do not contain a welded female Tele-Pole™. The height of the Tele-Poles™, combinded, can easily be adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole™ becomes a rigid support for connecting devices or cradles. The double swing arm allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12".  Features: Dual articulating swing arms allows for ideal device placement Compatible with a variety of RAM® laptop, tablet, and other device holders Made of powder-coated steel and marine-grade aluminum Backed by a lifetime warranty Hardware Included: Assembly Hardware (4) 5/16"-18 x 1" Carriage Bolts (4) 5/16"-18 Hex Nuts (4) 5/16" Flat Washers (4) 5/16" Split Lock Washers (4) Rubber Caps

Tele-Sun Carbon Fiber Shade Poles with Carry Bag Extend your time on the water and at the sandbar with the new Tele-Sun Shade Poles! Made from strong, lightweight and flexible Carbon Fiber, the Tele-Sun Shade Poles are easy to install and stow – maximizing time and fun on your boat. Simply insert the poles into your boat’s rod holders, secure a sun-protecting fabric to the boat top, attach the fabric connector to the poles and extend the poles into position. The Tele-Sun Shade Poles can be mounted to the front or rear of your boat, depending on your preference, and telescope from just over 52.89" to 80.4" tall. Features: Lightweight Carbon Fiber material with clear, Awl Grip UV-protection  Built to withstand the harsh marine environments  Easy installation to deck-mounted rod holders with 1/4” pin  Cam cleat allows for easy adjustment of line tension  Open hood feature allows for alternative fabric clamping bungee cord system  Extends from 52.89" to 80.4" Sold as a pair Includes a mesh carrying bag for storage  Not included - Flush Mount Rod Holder 10° (Part # F31-0702BXY) and canvas material 1-year limited warranty

RAM X-Grip II Part #: RAM-HOL-UN8BU Sometimes, its all about the design. If you are looking for a compact mount for your tablet without that cookie cutter shape, you've found it. The RAM X-Grip II has a clean and clever four leg design that sports great holding power without hiding your tablet behind foam pads and plastic. The perfect compliment to the modern sleek interior of today's vehicles, the RAM X-Grip II is the tablet holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your tablet and become the most useful accessory in your vehicle. The RAM-HOL-UN8BU consists of a spring loaded holder and 1" rubber ball connected to the back of the base. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN8BU expands and contracts for perfect fit of most 7" tablets. Compatible Devices: Amazon Kindle Amazon Kindle Fire Archos 7 Asus EEE Pad Memo Barnes & Noble NOOKcolor BlackBerry PlayBook Dell Streak 7 HTC Flyer Panasonic Toughpad JT-B1 Samsung Galaxy Tab (7" version) All devices that maintain the following dimensions below: Holder Dimensions: Minimum Width = 2.25" (Devices 2.25" in width must be a minimum of 7" in height to fit) Maximum Width = 5.75" Depth = 0.875" Features: Spring loaded holder expands and contracts for perfect fit of your tablet Rubber coated tips will hold your tablet firm and stable Versatility of holder allows for attachment to many RAM-to-RAM ball and 1" socket mounts Socket technology allows for multiple adjustment angles and articulation of your tablet Easy access grip knobs, located on the back of the holder for quick release of your tablet Material: High Strength Composite with Rubber Tips Ball Size: 1" Rubber Ball "B" Size

RAM Mount 1.5 Inch Ball Short Arm with 2.5 Inch Round Base The RAM Mount RAM-103U-B mount, with short arm, consists of the 1.5" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5" diameter rubber ball. The RAM-202U round base has a 1.5" diameter rubber ball connected at right angles to a 2.5" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM Double Swing Arm w/4" Male & No Female Tele-Pole Swing Arm connects to a 75mm x 75mm VESA Plate.

12" Upper Flange Pole with D Size 75x75mm VESA Mount This 12" Upper Flange Pole consists of a 12" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with the specific vehicle, enabling a rugged mobile office setup. Features: Pair this 12" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 7.49 lb.

8" Upper Flange Pole with D Size 75x75mm VESA Mount This 8" Upper Flange Pole consists of an 8" upper pole, a D-size ball base, a medium-length double socket arm, and a D-size 75x75mm VESA Mount to connect with your device holder. Pair this upper pole with a RAM® vehicle base that is compatible with a specific vehicle for a rugged mobile office setup. Features: Pair this 8" upper pole with any RAM® lower pole and vehicle base that are compatible with your specific vehicle Consists of D-size mounting components, including a 75x75mm VESA Mount for attaching a double socket arm; ball and socket technology allows for near-infinite adjustability Backed by a lifetime warranty Specifications: Hardware Included: Assembly Hardware Socket-to-Socket Length (inch): 6.88” Hole Pattern (inch): 75 x 75mm VESA Ball Size (inch): D Size (2.25") Weight Capacity: Standard Use: 6 lbs / Heavy-Duty Use: 5 lbs Materials: Powder-coated steel and marine-grade aluminum Weight: 6.7 lb.

RAM Universal No-Drill RAM POD III Vehicle Mount with Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern) The RAM-316-3-2461U consists of the RAM POD III No-Drill vehicle base, 3 rigid aluminum rod legs, double socket arm, 2.5" round base that contain the universal AMPs hole pattern and 3.625" square base that contains the VESA hole pattern. The base of the mount connects to your seat rail without any drilling necessary. The rigid aluminum rod legs can be bent to position your device to its optimum viewing location. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The square base includes a 75mm X 75mm VESA hole pattern with 1.5" rubber ball positioned 0.88" from the center of one edge. Leg Lengths: 18", 20" and 30" Installation Instructions: At right angles to the base of two legs are feet with mounting holes. Simply place the holes into the passenger seat mounting bolts and adjust the mount to the required height with the rigid aluminum rod legs. The third leg on the RAM POD III should also be adjusted to help support the mount. The rigid aluminum rod arms will hold everything you need safely and securely. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 75mm X 75mm VESA 3.625" Plate with 1.5" Diameter Ball This RAM-2461U consists of a 1.5" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The RAM-2461U is compatible with the following electronic devices: MobileDemand XTablet T8600 Glacier Computer Ridgeline Routeware DMS 5000

RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern) The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. Material: Powder Coated Marine Grade Aluminum U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag.

RAM 75mm x 75mm VESA 3.625" Plate w/ 2.25" Diameter Ball This RAM-D-2461U consists of a 2.25" rubber ball, connected to a 3.625" square plate with a 75mm X 75mm VESA hole pattern. The rubber ball is positioned 0.88" from the center of one edge. Material: Powder Coated Marine Grade Aluminum Ball Size: 2.25" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. The