|
Track Ball™ Mount for iPad Pro 11" (1st - 4th Gen) & Air 4/5
This RAM® iPad Track Mount (RAM-HOL-AP23-354-TRA1U) is made up of a C-size 1.5" ball molded to a high-strength composite base, a rubber friction washer, and a stainless steel T-bolt for sliding into any third-party track system or the RAM® Tough-Track™ line of tracks.
Simply insert or slide the Track Ball™ into the track and twist the ball clockwise to tighten it in place. Twist counterclockwise to loosen or adjust the ball. Included in this kit are a C-sized medium-length socket arm and a form-fit cradle for the iPad Pro 11" (1st-4th Gen), Air 4 & 5, providing a perfect fit for the iPad without a case.
Features:
1.5" C-size RAM® ball with adjustable T-bolt and friction washer designed for track mounting systems including the RAM® Tough-Track™ and other third-party track systems; simply insert into the track and twist the ball clockwise to tighten
Includes a C-sized medium-length socket arm and form-fit cradle for the iPad Pro 11" (1st-4th Gen), Air 4 & 5 providing a perfect fit for the iPad without a case
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly hardware
T Bolt Dimensions: .48” x .95”
Suction Size (inch) 3.3” diameter
Socket to Socket Length (inch): 4.66”
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and high-strength composite
Weight: 1.58 lb.
Compatible Devices:
iPad Air 4, iPad Air 5, iPad Pro 11", iPad Pro 11" (2020)*, iPad Pro 11" (2021)*, and iPad Pro 11" (2022)*
|
70.01 |
|
|
EZ-Roll'r Cradle for Apple iPad Pro 12.9" 3rd Gen
The RAM® EZ-Roll’r™ cradle for the iPad Pro 12.9” 3rd Gen secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.
Features:
1. Compatible with various iPad cable/docking accessories
2. Roller design for super smooth placement and removal of the iPad Pro
3. High strength materials maximize longevity of cradle
4. Full access to all ports and buttons
5. Lifetime warranty
Material:
High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag.
|
24.43 |
|
|
EZ-Roll'r™ Cradle for Apple iPad Pro 11"
The RAM® EZ-Roll’r™ cradle for the iPad Pro 11” secures your device in a form-fit holder while keeping the entire screen visible. Simply slide your iPad into the cradle and roll the top clip over the device to secure into place. The side buttons, camera, and charging port are conveniently exposed and accessible. This RAM® EZ-Roll’r™cradle also features three attachment points on the back to attach a RAM® round ball base. An attachment point on the side of the cradle allows for the placement and removal of the Apple Pencil.
Features:
Compatible with various iPad cable/docking accessories
Roller design for super smooth placement and removal of the iPad Pro
High strength materials maximize longevity of cradle
Full access to all ports and buttons
Lifetime warranty
Specifications:
Material: High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag
|
22.56 |
|
|
EZ-Roll’r™ Cradle for the Apple iPad Pro 10.5
The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro 10.5 secures your device in a form-fit holder that keeps the entire screen visible. Simply slide your iPad into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. The side buttons, camera and charging port are conveniently exposed and accessible.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Compatible with various iPad cable/docking accessories
Patented roller design for super smooth placement and removal of the iPad Pro
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite
Note:
This product is NOT recommended for devices with a Tech Armor Glass Screen Protector.
The "U" in the part number reflects product packaged in poly bag.
|
17.35 |
|
|
EZ-Roll’r™ Cradle for the Apple iPad Pro 12.9"
The RAM® Mounts EZ-Roll’r™ cradle for the iPad Pro secures your device in a form-fit holder that keeps the entire screen visible. Designed for tablets that are not in a case, the EZ-Roll’r for the iPad Pro features a holder for the Apple Pencil as well. Simply slide the tablet into the bottom cups and then roll the top clip over the top of the device to anchor it into the cradle. Side buttons, charging port and camera lens are conveniently exposed and accessible while in the EZ-Roll'r™ cradle.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
Features:
Compatible with various iPad cable/docking accessories
Patented roller design for super smooth placement and removal of the iPad Pro
High strength materials maximize longevity of cradle
Full access to all ports
Holder for Apple Pencil built into the side of the cradle
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite
Note:
This product is NOT recommended for devices with a Tech Armor Glass Screen Protector.
The "U" in the part number reflects product packaged in poly bag.
Weight:
0.7 lbs.
|
25.63 |
|
|
RAM Mount Tab-Tite™ Cradle for the Apple iPad Air 1-2 & 9.7" Tablets w/Case, Skin or Sleeve
Get the most out of your tablet with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Features:
Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
Back plate can support various size support cups
Spring loaded tension provides secure support for your tablet
Spring loaded cradle allows for quick release of your tablet
Full access to all ports
Material:High Strength Composite
Note:The "U" in the part number reflects product packaged in poly bag.
Weight:0.65 lbs.
|
27.61 |
|
|
RAM TAB-TITE Universal Clamping Cradle for the iPad mini WITH CASE, SKIN OR SLEEVE
The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet.
Compatible Devices:
Apple iPad mini WITH CASE, SKIN, SLEEVE
Apple iPad mini (with Retina display) WITH CASE, SKIN, SLEEVE
The Tab-TiteT cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 6.80" minimum to 9" maximum
Width: Maximum width to 5.68"
Depth: 0.125" minimum to 1" maximum
Tab-Tite Cradle Features:
Support cups contain open slots to accommodate for tablets of various sizes
Back plate can support various size support cups
Spring loaded tension provides secure support for your tablet
Spring loaded cradle allows for quick release of your tablet
High strength materials maximize longevity of cradle
Full access to all ports
Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.38 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
X-Grip® Dashboard Mount with Backing Plate for 9"-10" Tablets
The RAM® X-Grip® universal holder for 9"-10" tablets features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Included are easy-access grip knobs located on the back of the holder for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM® X-Grip® with, RAM® ball and socket technology allow for near-infinite adjustability to achieve the ideal viewing angle while also extending the life of your tablet by providing shock and vibration damping.
The RAM-101U-B consists of a short double socket arm and two 2.5" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allow for almost infinite adjustment and perfect viewing angles.
Features:
Spring-loaded 'X' design with rubber caps sports great holding power without obstructing your tablet; fits most 9 in. -10 in. tablets
Drill-down mounting solution; choose either round plate featuring the AMPS hole pattern for attachment to compatible device holders
2.10 in. x 2.60 in. steel backing plate attaches to a variety of RAM® Mounts ball bases
Made of high-strength composite and steel components for durability and reliability in the most demanding environments
Backed by a lifetime warranty
Specifications:
Hardware Included: Assembly Hardware, (1) 2.10" x 2.60" Steel Backing Plate, (4) #8-32 x 1" Screws, (4) #8 Split Lock Washers, and (4) #8 Flat Washers
Holder Dimensions (inch): Max Height: 10.25" (using optional supports), Width Range: 6.25" - 8.1", and Max Depth: .875"
Socket to Socket Length (inch): 2.5”
Hole Pattern (inch): 4-Hole AMPS: 1.181" x 1.496", 3-Hole 120-Degree: 1.812" Diameter
Plate Size (inch): 2.5" Diameter
Ball Size (inch): C size (1.5”)
Weight Capacity: The standard use is 4 lbs. and the heavy-duty use is 3 lbs.
Materials: Marine-grade aluminum and high-strength composite
Weight: 2.42 lb.
Compatible Devices:
Amazon: Fire HD 10
Apple: iPad (1st Generation), iPad (3rd Generation), iPad (4th Generation), iPad (5th Generation), iPad (6th Generation), iPad (7th Generation), iPad (8th Generation), iPad (9th Generation), iPad (10th Generation), iPad 2, iPad 9.7 (2017), iPad 9.7 (2018), iPad Air, iPad Air 2, iPad Air 3, iPad Air 4, iPad Air 5, iPad Pro 9.7 (1st Generation), iPad Pro 10.5 (2nd Generation), iPad Pro 11", iPad Pro 11" (2020), iPad Pro 11" (2021), and iPad Pro 11" (2022)
ASUS: MeMO Pad FHD 10, Transformer Pad, ZenPad 10, ZenPad 3S 10, and ZenPad Z10
Dell: Venue 10 7000, Venue 11 Pro, and Venue 11 Pro 7000
Google: Nexus 10 and Pixel C
HP: ElitePad 900, ElitePad 900 G1, Pro 610, and Pro Slate 10.1
Huawei: MediaPad M2 10.0, MediaPad M3 Lite 10.0, and MediaPad T3 10
Lenovo: Miix 3, Tab P12 Pro, S6000, Tab 2 A10-70, Tab 4 10, Tab 4 10 Plus, Tab A10, Tab3 10 Business, ThinkPad 10, ThinkPad Tablet 2, Yoga Book, Yoga Tab 3 10, Yoga Tab 3 Pro, Yoga Tablet 10, Yoga Tablet 10 HD+, and Yoga Tablet 2 (10 inches)
LG: G Pad 10.1, G Pad II 10.1, G Pad X 10.1, and G Pad X II 10.1
Microsoft: Surface 2, Surface Pro, Surface Pro 2, Surface Go, and Surface Go 2
Nokia: T21
Samsung: Galaxy Book 10.6, Galaxy Tab 10.1, Galaxy Tab 2 10.1, Galaxy Tab 3 10.1, Galaxy Tab 4 10.1, Galaxy Tab A 9.7, Galaxy Tab A 10.5, Galaxy Tab A8 10.5, Galaxy Tab Active Pro, Galaxy Tab Active4 Pro, Galaxy Tab Pro 10.1, Galaxy Tab S 10.5, Galaxy Tab S2 9.7, Galaxy Tab S3 9.7, Galaxy Tab S4 10.5, Galaxy Tab S5e, Galaxy Tab S6, Galaxy Tab S7, Galaxy Tab S7 FE, Galaxy Tab S7 Plus, Galaxy Tab S8, and Galaxy Tab S8 Plus
Sony: Vaio Tap 11, Xperia Tablet S, and Xperia Tablet Z
Vankyo: MatrixPad Z4 10"
Zebra: ET50 10" and ET55 10"
|
123.79 |
|
|
PedestalPod with RAM Mount Pre-Cut for Lowrance HDS-9 MFD Gen2 Touch & HDS-9 Gen3 - Carbon Black
PedestalPod with RAM Mounts is specifically designed for mounting the fishfinder near the bow on Bass Boats. Built on the foundation of NavPods popular range of waterproof housings for marine electronics, PedestalPods position your fishfinder/chartplotter at an easy-to-reach 20” off the deck. This allows the user easy access to the display for changes to range, zoom or even control the trolling motor. There is a big difference between reaching down to a height off the deck of 20” to control your fishfinder compared to reaching all the way down to the deck when it was only bracket mounted.
PedestalPods are manufactured with a double gasket system that provides an excellent watertight seal. This offers protection of your fishfinder/chartplotter from the harshest of wet boating conditions. This protection assures the reliability and longevity of your marine electronics.
The PedestalPod with RAM Mounts utilizes the proven RAM Mounting system with the large 2.25” rubber “D” size ball and the RAM pin-lock security solution. RAM Mounts are designed with a patented rubber ball and socket system that allows an almost infinite amount of ways to position the angle of the fishfinder for that precise position of viewing.
When you might be trailering, or storing the boat, the display can fold flat onto the deck with only 10” of clearance. This will allow most boat covers to fit over the PedestalPod when not in use.
Your fishfinder is easily flush mounted into the pre-cut face of the NavPod. There are pre-cut models available for 7”, 9”, and 12” LCD displays from all major marine electronic manufacturers.
PedestalPods – Protection, Convenience, Security.
|
654.53 |
|
|
RAM Universal Large Tab-Tite Holder f/10" Screen Tablets
Part #: RAM-HOL-TAB-LGU
Get the most out of your tablet with the Universal RAM Tab-Tite™ cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the holder to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
The Tab-Tite™ is compatible with the following tablets WITH OR WITHOUT SKINS, SLEEVES OR CASES:
Apple iPad & iPad 2
Asus EEE Pad
Asus Eee Pad Transformer
HP TouchPad
Lenovo LePad Slate
LG G-Slate
LG Optimus Pad
Motorola XOOM
Pandigital R90A200
Samsung Galaxy 10.1
Toshiba Thrive
Most 10" Screen Tablets
Included With Purchase:
(1) Spring loaded back plate
(2) Support cups for thin tablets
(2) Support cups for wide tablets
Mounting hardware
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet with a case/sleeve/skin when determining the overall size.
Cradle Dimensions:
Height: 8.5" minimum to 10.75" maximum
Width: Maximum to 7.75"
Edge Depth: Maximum to 0.56"
Cradle Dimensions:
Height: 8.25" minimum to 10.75" maximum
Width: Maximum to 6.8"
Edge Depth: Maximum to 0.50"
Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports
Material:
High Strength Composite
|
34.40 |
|
|
D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ Wrench
The RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base and 11" x 3" rectangular base. The round base contains pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. The rectangle base contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
The RAM-D-111U-C is Compatible With:
Garmin Fishfinders and GPS Chartplotters
Humminbird Fishfinders and GPS Chartplotters
Lowrance Fishfinders and GPS Chartplotters
Raymarine Fishfinders and GPS Chartplotters
Overall Height:
8.125"
Weight Capacity:
Up to 15 lbs.
Weight:
3.45 lbs.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
2.25" Rubber "D" Ball Size
Hi-Torq™ Wrench
The RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an extra tight grip. This wrench was originally made for the military when using the RAM mounts in cold weather, and the knob could not be tightened by hand.
|
144.56 |
|
|
RAM Tab-Tite Universal Clamping Cradle f/Apple iPad w/LifeProof & Lifedge Cases
The RAM-HOL-TAB17U consists of a spring loaded back plate and custom support cups for 10" screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB17U is just what you need to get the most out of your tablet.
The RAM Tab-Tite cradle is compatible with the following tablets:
10" Screen Tablets with LifeProof nüüd cases
10" Screen Tablets with Lifedge cases
10" Screen Tablets with heavy duty cases
The Tab-Tite cradle is compatible with any tablet or reader that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Tab-Tite Cradle Dimensions:
Height: 8.75" minimum to 10.75" maximum
Width: maximum to 8.25"
Depth: maximum to 1.1"
Tab-Tite Cradle Features:
1. Support cups contain open slots to accommodate for tablets of various sizes
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. High strength materials maximize longevity of cradle
6. Full access to all ports
7. Lifetime warranty
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
27.61 |
|
|
RAM 1" Diameter Ball with Custom GoPro Hero Adapter
GoPro cameras have reinvented how we capture some of the most exciting moments in our lives. Nearly two decades ago, RAM began reinventing mounting systems so that enthusiasts could use their cameras and video equipment like never before. RAM is proud to offer a sleek new adapter that will bring two revolutionary product lines together and open up a world of possibilities. While the GoPro line of mounting accessories is nothing to scoff at, the diversity of the RAM product line is simply unmatched. Dream it. Live it. Capture it. RAM Mounting Systems and GoPro make it possible to truly "Be a HERO".
The RAP-B-202U-GOP1 consists of a 1" diameter rubber ball, connected to a custom GoPro adapter. The adapter attaches directly to the under-side of the camera, replacing the factory mounting bracket.
Compatible GoPro Cameras:
All HD HERO Original + HD HERO2 Professional Cameras
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
Mount to many RAM double socket arms and mounts
Multiple articulation and adjustment points for perfect viewing angles
Lifetime warranty
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
10.56 |
|