SHURflo 34-007, Heat Sink SHURflo Heat Sink, Attaches to Standard Motors For Extra Cooling, 5 Inches Long This heat sink is recommended when using SHURflo 8008-943-839 Diaphragm Pump when used for a RO system.

Shurflo 34-006 Heat Sink Heat Sink Cooling Fins, Attaches to Standard Motors For Extra Cooling, 3 Inches Long. For 3 Inch Diameter Motors.  

SHURflo 8008-943-839 Diaphragm Pump Spectra 125 PSI Replacement Pump This SHURflo diaphragm pump 8008-943-839 is the replacement pump for the Spectra 125 PSI Reverse Osmosis Booster Pump. Heat Sink 34-007 is recommended when using this pump with your RO system. Spectra Low Pressure RO Replacement Pump.

Marine Plumbing & Ventilation The plumbing and ventilation systems are two of the most important aspects of your boat. It is very important that any toilet facilities work properly, and you also need to ensure that there is adequate ventilation for the engine and to remove any fumes that can build up in passenger compartments or similar areas. With our marine plumbing and ventilation parts and accessories, you have what you need all in one place, right at your fingertips. From air conditioning & refrigeration supplies to bilge pumps, fans, and hot water heaters, we have it all under one roof.   We carry several brands and can offer Livewell pumps and transfer pumps, along with several marine sanitation options. Portable toilets are an excellent choice for boats that are large enough to accommodate them, but the comfort of your passengers is not the only thing to be aware of. You also need to make sure you have adequate engine cooling pumps, and that any washdown / pressure pumps work correctly. With a WaterMaker pump, quality fittings, and the right blowers & heaters for your boat, you can ensure that your boat will operate correctly and your passengers will have the comfort and convenience they need.

Shurflo SLV10-AA41 Auto Demand Pump 12V Shurflo SLV10-AA41 is an automatic demand pump designed for intermittent duty applications and low volume flows. No metals are used in the construction of the path fluid travels to prevent corrosion and provide increased chemical resistance. Made with polypropylene and Viton to endure a variety of harsh chemicals. Handles a maximum flow rate of 1 GPM.   Specifications: Pump Body: Polypropylene Impeller: Viton Shaft: Santoprene Port Flow Rate: 1 GPM Maximum Operating Pressure: 30 PSI Demand Switch: 40 PSI Inlet Port 3/8 Inch Barb Discharge Port: 3/8 Inch Barb Motor Specs: 12 Volt DC Leads: Standard   Features: Self-priming up to 2.5 vertical feet Long-life pressure switch Thermally-protected ball bearing motor with splash-proof housing Internal fan radiates heat; external heat sink not required Integral on/off switch optional

Silicone Heat Sink Compound - 3oz Tube Super Lube® Silicone Heat Sink Compound is a non-curing silicone paste, blended with thermally conductive, fine metal oxide powders. It will not harden, dry out or melt, and aids in the efficient transfer of heat away from electronics and electrical components. Super Lube® Silicone Compound can be used in temperatures from -40°F to 500°F (-40°C to 260°C).

Shurflo 94-315-34, 60 Psi Bypass Valve Kit

Shurflo 115V Replacement Motor For 11-150-00 Pump This Shurflo Replacement Motor part number 8000-633-236 is for the Shurflo Pump 11-150-00   Volts 115 a.c. 60 Hz   Max Amps 81 Pressure 60 psi 5.3 GPM Thermally Protected

Shurflo 8007-543-850 Pump 12V 45Bp Pvs Diaphragm Pump with 12 Volt DC Motor and 45 PSI Bypass. Polypropylene Pump Body, Viton Valves, Santoprene Diaphragm. Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female. 1.8 GPM open flow.   Features : Pump Body:Polypropylene  Impeller:Viton Shaft:Santoprene  Port Size:Inlet Port is 3/8 Inch-18 NPT Female, Discharge Port is 3/8 Inch-18 NPT Female.  Motor Specs :12 Volt DC, Permanent Magnet, P/N 11-184-04, Fuse Protected, On/Off Switch, Connector.

SHURflo 100-000-21, Single Fixture Delivery Pump 12VDC SHURflo Single Fixture Delivery Pump with motor enclosure, Positive Displacement Wobbler Style, 12VDC with Wire Leads, Manual Operation, 3/8" hose barb ports, 1.0 GPM open flow OEM Model, same pump as 100-009-21.

SHURflo 166-200-36, Air Diaphragm Pump 0.6 GPM SHURflo Air Diaphragm Pump, 0.6 GPM (2.3 l/min), Continuous Duty, Viton Valves and Diaphragm, Polypropylene Body, 20-60psi, 3/8” Hose Barb Fittings   Item Diaphragm Pump Type Air-Driven Injection  Inlet/Outlet (In.)3/8 HB Body Material Polypropylene Diaphragm Material Viton(R) Check Valve Viton(R) Max. Temp. (F)120 Length (In.) 5.80 Width (In.)3.80 Height (In.)7.00 GPM Max .0.6 Max. Pressure (PSI) 60 Self-Priming 25" Hg

Shurflo 166-200-57, Air Diaphragm Pump 0.6 GPM Shurflo Air Diaphragm Pump, 0.6 GPM (2.3 l/min), Continuous Duty, Santoprene Valves and Diaphragm, Polypropylene Body, 20-60psi, 3/8 Hose Barb Fittings

SHURflo 2088-313-145, Diaphragm Pump 3.6 GPM 12VDC SHURflo Diaphragm Pump Premium with Cooling Fins, 3.6 GPM Open Flow, 12VDC Continuous Duty, Viton Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing

SHURflo 2088-343-135, Diaphragm Pump 3.0 GPM 12VDC SHURflo Diaphragm Pump Standard, 3.0 GPM Open Flow, 12VDC Intermittant Duty, Viton Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing

SHURflo 2088-394-154, Diaphragm Pump 3.2 GPM 115VAC SHURflo Diaphragm Pump Standard, 3.2 GPM Open Flow, 115VAC Intermittant Duty, Viton Valves, Santoprene Diaphragm, 45 PSI Demand Switch (adjustable 30-50 PSI), 1/2" MSPT Ports, Polypropylene Housing