Gianneschi ECOJET-2BB-24V Bronze Self-Priming Pump

Gianneschi CP26-A1-110V 60HZ Bronze Self Priming Pump Gianneschi CP-26-A1-110V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch. Pump Body: Bronze Impeller: Bronze Shaft: 316 Stainless Steel Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch Motor Specs :0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase.

Gianneschi CP30-A2-110V 60HZ Brz Self Prim Pmp 110V 60Hz CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Features:   Body Pump:  Bronze Impeller:  Bronze Shaft:  316 Stainless Steel Port Size:  Inlet Port is 1 Inch, Discharge Port is 1 Inch Motor Specs:  0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase  

Gianneschi ECOINOX-2-24V SS Self-Priming Pump .37Kw ECOJET Series Jet Pump and Motor unit, 304 Stainless Steel construction, Noryl impeller, 316 Stainless Steel Shaft. Motor is 0.37 KW (0.5 Horsepower), 2900 RPM, 24 Volts DC.

Gianneschi ECOINOX1 24 NEW SS Slf Prim 24 .30Kw

Gianneschi CP40-24V Bronze Self-Priming Pump Gianneschi CP40-24V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.75 KW (1 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1-1/2 Inch, Discharge Port is 1-1/2 Inch.   Pump Body: Bronze Impeller: Bronze  Shaft: 316 Stainless Steel Port Size: Inlet Port is 1-1/2 Inch Discharge Port is 1-1/2 Inch Motor Specs : 0.75 KW (1 Horsepower), 1500 RPM, 24 Volts DC.

Gianneschi CP26-A1-24V Brz 24V Self Prim Pump  CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 1500 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.   Applications:  Ballast Bilge Diesel oil F.W./S.W. Circulation Fire-fighting Grey water S.W feeding Port Size: From 3/4'' to 1'' 1/2 BSP Pump casing: Bronze Impeller / Gear: Bronze Shaft: Stainless steel  

Gianneschi ECOINOX 418CE 24V Water System Jet type self-priming pumps in bronze or Stainless steel • Dry running protection • Costant Qow with variable water demand • A valid substitute of the mechanical control • Reduced maintenance • Pre-set pressure system (no adjustments needed) • No need for an expansion tank • Space saving • New electronic controller with possibility of manual selection of starting pessure

Gianneschi 01ACP2602A1 Self - priming liquid ring pump CP - 26 - A1 - 230V 0.37KW 0.5HP   The Gianneschi CP - 40G - 230V is a Bronze CP Series Self Priming Liquid Ring Pump and Motor unit with Bronze Impeller, 1 - 1/2 Inch by 1 - 1/2 Inch Ports, coupled to a 0.75 KW (1 Horsepower), 1450 RPM, 230 Volt AC, 50/60 Hz, Single Phase Motor. This pump is specially equipped with a bronze impeller and body, a 316 stainless steel shaft, an a high quality ceramic mechanical seal with graphite inox, as well as utilizes IP55 protections and Class F insulation. It is self - priming up to 8 m, it can go as high as 1750 RPM, and it operates at 60 Hz at 2 Hp. It is recommended that one install a clapet valve and filter with its suction pipe in order to avoid backflow through the pump, and the installed must pump water through it when either rebooting or first initializing it in order to achieve the necessary suction for it to automattically prime itself. Motor has F class Insulation, IP 55 Protection.  

Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.

Gianneschi CP-30G Bronze 230V 50Hz 1Ph Self Priming Pump

Gianneschi ECOINOX-1-CE-12V Water System 12V Main Water Pressure System features:  A valid substitute mechanical control Compact size Constant flow with variable water demand Dry run protection Jet type self priming el/pumps in bronze or s/steel No accumulator tank needed Pre-set pressure system (no adjustments need) Reduced maintenance Port Size: From 1'' to 1'' 1/2 BPS

Gianneschi ACB80E-230V Mpu 230V 60Hz Gianneschi ACB80E-230V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 230 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.   Applications for the ACB80E230V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oil and diesel, fire fighting, bilges, and water supplying.

Gianneschi ACB61E-12V Bronze 12V Self-Prime Pump

Waste Water Diaphragm Pump - 22L(5.8GPM) - 24V Single chamber, self priming, diaphragm pump 24V for grey or bilge water. Shower drain, transfer or pump out. Capacity 22 L/min (5,8 GPM), flexible installation with 360 degree rotational ports. Quiet operation and low power consumption. Operates with no need for filter. Including 19mm (3/4″) and 25mm (1″) straight connectors. 2,5A fuse. Interchangeable with Johnson Pump 10-13350-04. Specifications: Weight: 0,8 kg/1Lb Dimensions: 141/5.5L x 105/4H x 140/5.5W mm/in Type: Bilge/grey water *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance