400 GPH 12V Bilge Pump - Barbed Port A small, price-wise alternative in the submersible bilge family. The low-cost choice for boat owners who do not want to forsake quality. Features: Capacity straight (13.6V/27V): 30 I/min. - 475 GPH Voltage: 12 V DC Amperage: 2.5A Fuse Size: 3 A Connection: 3/4" Max height: 100mm - 4" Weight 0.35kg - 12oz CE-Approved Barbed Port

500 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 3/4" Includes Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 33 l/min - 525 GPH Capacity straight (13.6V/27.2V): 40 l/min - 630 GPH Amperage: 2.5 A Fuse size: 5 A Connection: 3/4" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 14.4 oz.

1000 GPH Multi Port Shower Sump Pump 12V with Switch This compact shower sump system is designed to meet the higher demands of today's boating industry where more equipment is used. This also includes the freshwater system onboard and involves showers, dish-washing machines, galley sinks, etc. The shower sump turns on/off automatically using our Ultima switch technology and has multiple inlet ports for handling wastewater from more than one tapping point. The check valve on the outlet stops water from flowing back into the tank. The tank has a tight-fitting lid to minimize splashing and odors. To further aid in cleaning, the system includes an easily removable mesh filter. *CE-Approved Features: Includes the L650 Duo pump and a mesh filter for easy cleaning Multiple inlet ports Handles wastewater from more than one tapping point Tight-fitting lid to minimize splashing and odors Check the valve on the outlet Capacity 1.0 m head (13.6 V/27 V): 53 l/min - 844 GPH Capacity straight (13.6 V/27 V):61 l/min - 972 GPH Amperage: 3.4 A Fuse Size: 5 A Pump Body: Thermoplastic Shaft Seal: Lip seal Voltage: 12 V DC Intake Hoses: 1x3/4", 1x3/4" or 1x1" Discharge Hose: 3/4"

Groco Cp-20-Bb 12V Booster Pmp 1" Id Hose  Groco- Centrifugal Booster Pump Bronze 17GPM 1" Hose Barb Ports 12VDC   More Info: CP20-BB

1250 GPH Ultima Combo Automatic Submersible Bilge Pump 12V Johnson Pump Marine Ultima Combo bilge pumps are JPM's proven Cartridge Bilge Pumps combined with the non-clogging electronic switch Ultima Switch™ for automatic operation. The electronic automatic switch Ultima Switch™ uses the patented Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by level of water present in the bilge and automatically activates and deactivates the pump. CE-Approved Features: Pre-configured with an electronic Ultima Switch for automatic operation Capacities 500 GPH, 750 GPH, 1000 GPH and 1250 GPH Extremely energy efficient Water-cooled motor for long service intervals Compact, all-in-one motor/impeller unit with stainless steel (SS2343) shaft No tools needed for maintenance, no need for complete disassembly. You can now leave the pump casing attached to both the boat and the hoses.  500 GPH, 750 GPH, and 1000 GPH pumps have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps 500 GPH, 750 GPH, and 1000 GPH pumps are delivered including both a straight and a 90° smooth elbow Dura-Port as well as a removable check valve Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel Voltage: 12v Wire size: 16GA Hose size: 1-1/8" Does not include Dura-port connection Specifications Capacity 3ft (0.9 m) head (13.6V/27.2): 60 l/min - 952 GPH Capacity straight (13.6V/27.2V): 73 l/min - 1150 GPH Amperage: 3 A Fuse size: 5 A Connection: 1-1/8"" Length: 4.41" (112 mm) Width: 4.25" (108 mm) Height: 3.35" (85 mm) Weight: 16 oz.

Aqua Void Automatic 500 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: High-flow impeller design Quick-change motor connection Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Smaller profile than pumps with switches Straight or 90-degree dura port discharge ports with an included check valve Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Clip-in basket Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Automatically monitors the presence of water through low-amp draw impeller spin The common body allows interchangeable motor cartridge replacement to the same or different size For tighter fit in smaller spaces Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow Corrosion-resistant and extended life Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires 100 days of service before critical battery draw down* Automatically monitors the presence of water through low-amp draw impeller spin Ease of installation & maintenance Specifications: Pump Size: 500 GPH Capacity Straight (12V): 600 GPH (38 I/min) Voltage: 12V Amp: 2.7A Fuse: 3.5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 11.2 oz (0.32 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)

Aqua Void Automatic 800 GPH Bilge Pump - 12V With its industry-first quick-change motor connection and new reinforced click-in basket, this bilge pump simplifies cleaning and installation, and it's convenient and efficient. Its enhanced motor ensures reliability and performance in any condition. Experience worry-free boating with Aqua Void. Experience the Industry-First Quick-Change Motor Connection Johnson Pump's groundbreaking product features a quick-change motor connection for hassle-free cartridge motor changes or capacity upgrades. Take Control of the Boating Experience with Unparalleled Convenience The Aqua Void Cartridge Bilge Pump is designed with single-handed access, perfect for tight bilge spaces. The pump body is easy to install or remove, and an innovative reinforced click-in basket simplifies installation, cleaning, or inspection. Enjoy Enhanced Efficiency and Higher Flow Rate Powered by an enhanced motor and high-flow impeller, the Aqua Void achieves increased efficiency and a higher flow rate while conserving energy consumption. Trust in Reliable Performance Under Demanding Conditions Johnson Pump Marine is renowned for its industry-leading reliability. The Aqua Void lives up to this reputation with its robust construction and meticulous engineering. Enjoy a worry-free time on the water and experience Reliability On Board. The Aqua Void Bilge Pump is a game-changing solution that sets a new standard in bilge pumps. Don't miss this opportunity to enhance the boating experience. Get the Aqua Void today! Features: High-flow impeller design Quick-change motor connection Switchless automatic bilge pump with low-amp resistance monitoring Durable thermoplastic housing design commonality with removable motor cartridge Smaller profile than pumps with switches Straight or 90-degree dura port discharge ports with an included check valve Water-cooled motor, 316 stainless steel shaft, and permanently lubricated double bearings Clip-in basket Benefits: Heightened efficiency and an increased flow rate Enjoy quick and hassle-free cartridge motor changes or capacity upgrades Automatically monitors the presence of water through low-amp draw impeller spin The common body allows interchangeable motor cartridge replacement to the same or different size For tighter fit in smaller spaces Allow multi-directional hose routing, eliminate stress cracking without disengaging hoses or removing pumps, and reduce cycling from water backflow Corrosion-resistant and extended life Competitive Advantages: The most efficient and highest flow in the GPH capacity category Industry-first and only cartridge motor pump with an included harness connection requiring no cutting and splicing of wires 100 days of service before critical battery draw down* Automatically monitors the presence of water through low-amp draw impeller spin Ease of installation & maintenance Specifications: Pump Size: 800 GPH Capacity Straight (12V): 795 GPH (50 I/min) Voltage: 12V Amp: 3.7A Fuse: 5A Hose Connection: 3/4 in. Wire Size: 16 GA, TINNED Weight: 12.6 oz (0.36 kg) Body: ABS Dura Port: PA66/GF - Nylon Shaft: 316 Stainless Steel Shaft Seal: Nitrile Rubber Motor Cartridge: PC-ABS Pump Dimensions (W x H x L): 2.75 x 4.69 x 5.24 inches (70 x 119 x 133 mm)

Cartridge Bilge Pumps 1000 GPH The 1000 GPH incorporates some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. We have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Capacity 3 ft (0.9 m) head (13.6 V): 50 l/min - 800 GPH Capacity Straight: 63 l/min - 1000 GPH Amperage: 3.2 A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz.

Cartridge Bilge Pumps 500 GPH For 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Capacity 3 ft (0.9 m) head (13.6 V): 33 l/min - 525 GPH Capacity Straight: 40 l/min - 630 GPH Amerpage: 2.5A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz.

Cartridge Bilge Pumps For 500 GPH, 750 GPH, and 1000 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable check valve. Features: Capacity 3 ft (0.9 m) head (13.6 V): 44 l/min - 700 GPH Capacity Straight: 50 l/min - 800 GPH Amperage: 3 A Fuse Size: 5 A Connection: 3/4" Max Height: 112 mm - 4.4" Weight: 0.27 kg - 9.6 oz.

Automatic Bilge Pump 500 GPH - 12V Fully automatic bilge pump 12V, automatic activation with a built in electrical level switch. Pump capacity 32 L/min (500 GPH) and 25 L/min (400 GPH) at 1m head. Stainless steel shaft, compact and easy to install. Tough thermoplastic ABS housing and removable base plate with strainer integrated. Easy maintenance and low power consumption. A three wire design allows for automatic, manual or override mode. Features: Automatic Submersible Includes 19 mm (3/4″) straight and elbow detachable discharge ports For pleasure boats up to 6m (20 Ft) length Specifications: Weight: 0.45 kg/1 lb Dimensions: 151/6L x 95/3.75H x 78/3W mm/in  Fuse: 1,8A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance

Cartridge Bilge Pump 1250 GPH The 1250 GPH incorporate some of the most advanced features in the industry, features developed from service in a wide variety of uses including racing, cruising, sport fishing, and demanding commercial duties. Both the Cartridge and the Ultima Combo pumps may be manually operated via the Johnson Pump bilge control panel. CE-Approved Features: Compact, all-in-one motor/impeller unit No tools needed for maintenance Extremely energy efficient Water-cooled motor for long service intervals Meets the international standard, ISO 8849 marine Pump body: Thermoplastic Shaft seal: Lip seal Shaft: Stainless steel (SS2343) Voltage: 12 V DC Capacity 3 ft (0.9 m) head (13.6 V): 60 l/min - 952 GPH Capacity Straight: 73 l/min - 1150 GPH Amerpage: 3 A Fuse Size: 5 A Connection: 1 1/8"" Max Height: 112 mm - 4.4" Weight: 0.32 kg - 10.4 oz.

Heavy Duty Bilge Pump 1600 series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 98 l/min - 1550 GPH Capacity straight (13.6 V/27 V): 100 l/min - 1600 GPH Amperage: 7 A Fuse Size: 10 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 149 mm - 5.86" Weight 1.3 kg - 2.75 lbs

Heavy Duty Bilge Pump 2200 series 12v The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 120 l/min - 1900 GPH Capacity straight (13.6 V/27 V): 130 l/min - 2060 GPH Amperage: 7.5 A Fuse Size: 12 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 1.3 mm2 - 16 GA Max height 177 mm - 7" Weight 2.7 kg - 6 lbs

Heavy Duty Bilge Pump 4000 Series 12v: The best choice when you are looking for high performance, heavy duty pumps designed to meet and exceed the tough demands of commercial and recreational duty. This pump has a liquid cooled, 12-pole motor with double ball bearings for extended service life. The 2200 motor is sealed off by a mechanical seal design, while the 1600 model has lipseal. The impeller is carefully designed and tested to maximize head and flow. The 4000 features a robust motor design, mechanical shaft seal, high impact ABS plastic and unique threaded port design. Universal base plate and a choice of 1-1/2" or 2" ports makes for a simple installation. Removable check valve included. CE-Approved Features: Heavy duty, 12-pole double ball bearing motor Liquid cooled for extended motor life Quality engineered mechanical/lip seal ISO 8849 Marine and CE standards Easily interchangeable with most similar bilge pumps Pump body: Thermoplastic Shaft seal: Mechanical seal Shaft: Stainless steel (SS2343) Voltage: 12 V Capacity 1.0 m head (13.6 V/27 V): 164 l/min - 2600 GPH Capacity straight (13.6 V/27 V): 252 l/min - 4000 GPH Amperage: 15 A Fuse Size: 25 A Connection: 1-1/8" and 1-1/4" Shaft: SS2343 Wire size: 2 mm2 - 14 GA Max height 216 mm - 8.5" Weight 2.45 kg - 5.4 lbs