|
MP Pumps FM15-AB-SK SERVICE KIT
This kit contains the following items
22358
1
Flange Gasket
23040
1
Flapper Valve
37138
1
O'Ring Viton
29715
1
Adapter O'Ring Viton
22240
1
Gasket
22361
1
Shaft Seal
23385
1
Impeller
This kit is put together at time of order.
|
1631.42 |
|
|
MP Pumps 21384 PUMP FM15 CI 1 1/8 MTR MNT
|
1640.70 |
|
|
Series 110 MP Pump 23922 Bronze Pump with Cast Iron Pedestal Mount
MP Pump 1-1/2" x 1-1/4" End Suction Centrifugal Pump
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron or bronze construction to suit a wide variety of liquids.
All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life.
Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
Suction And Discharge 1-1/2" x 1-1/4" NPT
Materials Of Construction Pump Bronze with Cast Iron Pedestal
Flow Up to 130 GPM
Head Feet Up to 60'
Impeller 4" semi-open
Motor Up to 2 HP, Motor not included
Drive Options Close coupled 56C, Close coupled 145TC,
Max Solid Size .32"
APPLICATIONS: Agricultural, Commercial, Industrial, OEM
|
1694.80 |
|
|
Series 110 MP Pump 23250 Cast Iron Pump with Pedestal Mount Cast Iron
MP Pump 1-1/2" x 1-1/4" End Suction Centrifugal Pump
The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron or bronze construction to suit a wide variety of liquids.
All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life.
Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.
Suction And Discharge 1-1/2" x 1-1/4" NPT
Materials Of Construction Cast Iron Pump and Pedestal
Flow Up to 130 GPM
Head Feet Up to 60'
Impeller 4" semi-open
Motor Up to 2 HP, Motor not included
Drive Options Close coupled 56C, Close coupled 145TC,
Max Solid Size .32"
APPLICATIONS: Agricultural, Commercial, Industrial, OEM
|
694.80 |
|
|
MP Pumps FloMax FMX 100 1" x 1" Close Coupled 3/4HP Motor Single Phase 39529
The patented 1” x 1” FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A type 6A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.
The FMX 100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride.
Discharge 1"
Suction 1"
Materials of Construction 316 stainless steel
Flow Up to 55 GPM
Head Feet 60'
Impeller 4.0"
Drive Options Close Coupled 1 HP TEFC IEC80B34 Motor
Close coupled 3/4HP TEFC IEC80B34 Motor
Engine Mount for 3/4" Shaft
Pedestal Mount 3/4" Shaft
Seal Type 6A carbon/ceramic/viton
|
1337.40 |
|
|
MP Pumps 21383 FM 15 BRONZE PUMP
MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only
FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
3" X 3" NPT Ports
Capacity up to 320 GPM
Total Head up to 145 feet
Bronze construction
5.75 inch diameter impeller
|
6386.81 |
|
|
MP Pump 23038 Impeller
This impeller fits the following MP Pumps: FM 5 & 8 in Bronze, FM 5 & 8 in Cast Iron, FM 10 & 15 in Bronze, and FM 10 & 15 in Cast Iron. If you need this impeller trimmed to a certain size please let us know what size in the comments section when checking out.
|
297.44 |
|
|
MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump
Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"
MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.
Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.
Specifications
Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI)
Suction & Discharge Connections: 3" X 3" FNPT
Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.
This item is 'build to order'.
|
6366.98 |
|
|
Jabsco 1" Bronze Pump 2/3 Cam
FEATURES
Pump Body:
Bronze Pedestal
Port Size:
1" NPT, Internal
Flow:
Up to 27.9 GPM at 10 feet of head, 2100 RPM.
Reduced cam versions have reduced flow.
Pressure:
Up to 26 PSI
Impeller:
Neoprene or Nitrile
Shaft Seal:
Lip Type or Mechanical Face Seal
Shaft:
Stainless Steel
Bearings:
Shielded Ball Bearings
APPLICATIONS / CHARACTERISTICS
MARINE- Pump bilge, Washdowns, Circulating water in bait tanks, Utility dock-side pump, Engine cooling.
INDUSTRIAL- Circulating and transferring, Velocity mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Dilute acids, Tanning Liquors, Glycerine, Brine, etc.
FARMING- Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE- Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1"NPT 1/2 Cam Face Seal Neoprene Impeller
|
491.65 |
|
|
MP Pumps 21372 Flomax 15 Self Priming Centrifugal Pump for Water & Fertilizer
FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.
A FLOMAX PumPAK is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.
The FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.
Model: Flomax 15 Part# 21372
Configuration: Pumpak
PORTS: 3 in.
Flow-Rate: 320 GPM
Head Feet: 145
Features
Material of Construction: Cast Iron
Renewable wear plate
Stainless steel drive sleeve
Stainless steel fasteners Up to a 25' suction lift
Applications
Agricultural
Industrial
Marine
|
1499.40 |
|
|
JABSCO 51270-2011 BRZ PUMP 2" BSP PORTS NEO
Pump Body:
Bronze head, Cast Iron bearing housing
Port Size:
2" Flanged, BSP or NPT
Flow:
Nominal 270 Liters/min (60 gallons/min) at 1500rpm
Impeller:
Neoprene or Nitrile
Shaft Seal:
Mechanical Carbon/Ceramic
Shaft:
316 Stainless Steel
Pulley:
Anodized Aluminum. 180mm (7") 'A' or 'B' section.
This Jabsco Manual Clutch Pedestal Mount Pump has 2" Flanged Ports or British Standard Pipe Threads or NPT.
It is constructed from marine quality bronze and stainless steel for ruggedness and reliability. The Jabsco 51270-2011 is easy to service, maintain and operate. It will tolerate abrasive wear and handles hard and soft solids without clogging. It can pump in either direction and will not airlock. The Non Centering one-piece handle will help prevent partial engagement. It has a self adjusting clutch to increase clutch life. It is also self-priming from dry up to 2.4m (7.8ft).
Jabsco Clutch Pump 2" British Standard Pipe Threads, Neoprene Impeller, 1A Or 1B Belt
|
2523.59 |
|
|
MP Pumps 21354, FLOMAX 10 Self Priming Centrifugal Pump End Only
2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: PEM 6.0
|
1428.30 |
|
|
MP Pump 24832 Cast Iron Pump
MP Pumps 24832, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: CCMTR 1.13 6.0
SUCTION AND DISCHARGE3" x 3" NPT
APPLICATIONAgricultural, Industrial, Marine, OEM
MATERIALS OF CONSTRUCTION316 stainless steel, Bronze, Cast iron
FLOWUp to 320 GPM
HEAD FEETUp to 145'
IMPELLER6.0" max. diameter, semi-open
MOTORUp to 7.5 HP
|
1397.70 |
|
|
MP Pump 24550 Pump Fm8 Brz Man Clutch
MP Pumps 24550 FLOMAX8 2" x 2" Self-Priming Centrifugal Pump, Bronze, Pedestal/Clutch, 5" Impeller
Renewable wear plate.
Stainless steel drive sleeve.
Stainless steel closure.
Up to a 25 foot suction lift
Specifications for this product
maximum flow150 gallons_per_minute
Included ComponentsCentrifugal Pump
UNSPSC Code40151500
MaterialBronze
body materialBronze
brand nameMP Pumps
Number of articles1
Model number24550
part number24550
|
4019.25 |
|
|
MP Pump 21362 Pump FM10 Bronze Ped
MP Pumps 21326
FLOMAX 8 Self Priming Centrifugal Pump End Only
2" X 2" NPT Ports
Capacity up to 150 GPM
Total Head up to 100 feet
FM8PPK B: PEM 3/4 5.0
|
5950.39 |
|