For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

For venting of bilge gases. Ozone & sunlight resistant. Will not support a flame. Black wire vinyl coated. 50 ft. rolls are sold by 50 ft. roll, but priced by the foot.

3/4" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze. Features: 149 series of hoses is extra flexible  Application: Bilge and live well hose Specifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 3/4" / (mm) 19.1 Outer Diameter: (inch) .986" / (mm) 25 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 4.99 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure

3/4" x 50' Heavy Duty PVC Bilge & Livewell Hose (FDA) - Clear with Black Helix Trident Smooth extra heavy wall vinyl (FDA) well hose. All clear (see thru) with black helix. Excellent durability, flexibility & bend radius for XHD bilge, live well, drain, scupper lines, etc. No cuffs are required.  Features: Flexible, but the 147 series is less flexible than the 149 series of hoses Application: Bilge and live well hose Specifications: Tube & Cover: Clear vinyl reinforced with black helix  Color: Clear with black helix Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-49°C)  Boxed: 50ft. / (15.24m) Inner Diameter: (inch) 3/4" / (mm) 19 Outer Diameter: (inch) 0.968" / (mm) 24.6 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 11 / (Kg/m) 0.33 Bend Radius: (inch) 2.25" / (mm) 57.2 *Burst Pressure is 4 x Working Pressure

Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

3/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max. Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working Pressure

1-1/4" x 50' Coil Flex Marine Wet Exhaust & Water Hose - Black Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max. Features:  Extra heavy tube and cover with wire helix between 2 ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/4" / (mm) 31.8 Outer Diameter: (inch) 1.40" / (mm) 32 Working Pressure: (Psi) 70 / (bar) 4.8 Bend Radius: (inch) 1.5" / (mm) 38 Weight: (Lb./50ft.) 35 / (Kg/m) 15.7 *Burst Pressure is 4 x Working Pressure

Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.

Polyester reinforced hose with plastic barrier veneer and outer layer tube to limit permeation. Complies with EPA and CARB low permeation requirements. Weather and UV resistant. Temp ranges from -20°F to 212°F. Primarily for fuel feed (gasoline up to 85% ethanol blends, diesel/bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats, SAE JI127 Type A1-15, ISO 7840 Type A1, and NMMA/CE type acceptance standards.

3/4" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on i.d size). Features:  The Blue cover allows for easy identification of "Cold Water" lines on your boat   Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility This hose is safe for use with drinking water Application: Perfect for cold pressurized applications, water feed, drains, and vent lines Construction: Tube & Cover: Clear FDA tube  Color: Blue Transparent  Reinforcement: Polyester Temperature Range: -18°F to 149°F (-28°C to 65°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 19 Outer Diameter: (inch) 1 / (mm) 25.4 Working Pressure: (PSI Vac In./Hg) 220 / (bar) 15 Bend Radius: (inch) 1.5" / (mm) 38 *Burst Pressure is 4 x Working Pressure

3/4" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is nontoxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).  Features:  The Red cover allows for easy identification of "Hot Water" lines on your boat Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility This hose is safe for use with drinking water Application: Perfect for hot, pressurized applications, hot water feed, drains, and vent lines Construction: Tube & Cover: Clear FDA tube  Color: Red Transparent  Reinforcement: Polyester Temperature Range: -18°F to 149°F (-28°C to 65°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 3/4" / (mm) 19 Outer Diameter: (inch) 1 / (mm) 25.4 Working Pressure: (PSI Vac In./Hg) 220 / (bar) 15 Bend Radius: (inch) 1.5" / (mm) 38 *Burst Pressure is 4 x Working Pressure

Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.

Poly Pro Anchor Line with Snap - 1/4" x 50' - Yellow Hollow Braid Anchor Line with Snap. Features: 100% premium multi-filament polypropylene floating rope Plated steel Spring Hook (155630) Packaged in a reusable clamshell pack (304206050YW-1) or easy to dispense spool WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Double Braided Nylon Dock Line - 3/4" x 50' - Black Features:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point