Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.

Ampco Pumps KC2 2 1/2 X 2 Fluid End Nialbz 5.00" Trim

1-1/2" x 50' Box VAC XHD Sanitation Hose - Hard PVC Helix - White Trident Ply Extra heavy-duty sanitation hose of smooth white vinyl. Specially compounded to provide excellent resistance to odor permeation and (FDA) potable water fill. Also for the critical bilge, drain scuppers, live wells, etc. Self-draining installations are recommended for the longest odor-free service. Features: A hard PVC helix gives good flexibility and bend radius No cuffs are required Application: Specially compounded to provide resistance to odor permeation and (FDA) potable water fill Also for critical bilge, drain scupper, live well, etc Specifications: Tube & Cover: Hard PVC helix Color: White Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 1.788" / (mm) 45.4 Working Pressure: (Psi Vac In./Hg) 28 Weight: (Lb./ 50 ft.) 22 / (Kg/m) 0.76  Bend Radius: (inch) 4" / (mm) 102 *Don't use with alcohol, anti-freeze, petrochemicals, or solvents *Burst Pressure is 4 x Working Pressure

1-1/2" x 50' VAC XHD Bilge & Live Well Hose - Hard PVC Helix - Black Trident VAC XHD Bilge and Live Well Hose. Helical PVC reinforcement provides excellent flexibility and bend radius for live well and heavy-duty bilge applications. It has a smooth outer surface to allow for easy clamping. The excellent bend radius of this product gives you the flexibility of a rubber hose making installations a breeze. Features: 149 series of hoses is extra flexible  Application: Bilge and live well hose Specifications: Tube & Cover: Hard PVC helix Color: Black Reinforcement: PVC Helix Temperature Range: 10°F-120°F (-12°C-48°C)  Boxed: 50ft. / (15.2m) Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 1.792" / (mm) 45.5 Working Pressure: (Psi Vac In./Hg) 28 / (Bar) 1.93 Weight: (Lb./ 50 ft.) 22 / (Kg/m) 9.98 Bend Radius: (inch) 4" / (mm) 101.6 *Burst Pressure is 4 x Working Pressure

1-1/2" x 50' Coil - Flex Marine Wet Exhaust & Water Hose - Black Trident Flex wet exhaust hose for longer bent connections. In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max. Features:  Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.’s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38 Outer Diameter: (inch) 1.97 / (mm) .05 Working Pressure: (Psi) 60 / (bar) 4.1 Bend Radius: (inch) 4.0" / (mm) 102 Weight: (Lb./50ft.) 45 / (Kg/m) .518 *Burst Pressure is 4 x Working Pressure

1-1/2" x 50' Coil - Premium Marine Sanitation Hose - White with Green Stripe Trident Premium Sanitation Hose resistant to odor permeation. Simply the BEST solution for marine environments, built with EPDM rubber to ensure the overall performance and resistance to odor permeation that you would expect in a sanitation hose.  Features: Resistance to Odor Permeation and winterizing with antifreeze  With wire helix between 2 ply reinforcement this hose has excellent bend radius, flexibility, and fitting acceptance and retention This makes for easy installations with no heatgun or lubricant necessary 10 Year Warranty Application: Premium Sanitation Hose for all head & holding tank connections NOT for potable water Construction: Tube & Cover: EDPM/SBR Rubber Color: White with Green Stripe Reinforcement: Polyester reinforcement + spring steel wire helix Temperature Range: -20F-220°F (-29°C-104°C) Length: 50’ (15m) Specifications: Inner Diameter: (inch) 1-1/2" / (mm) 38.1 Outer Diameter: (inch) 2 / (mm) 50.8 Working Pressure: (Psi) 60 / (bar) 4.1 Weight: (Lb./50ft.) 44 / (Kg/m) 19.9 Bend Radius: (inch) 3" / (mm) 76.2 *Burst Pressure is 4 x Working Pressure

1-1/2" x 50' Coil Type A2 Fuel Fill Hose Trident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends).  Features:  This hose is built with the best fuel, fire, and age-resistant formulation  Provides extraordinary resistance to aging, fire, heat, cold, and the ozone  Also, provides excellent bend-ability Application: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube & Cover: NBR / Neoprene  Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC)  Length: 50 ft. (15.24 m) Coil Specifications: Inner Diameter: (inch) 1/2" / (mm) 38 Outer Diameter: (inch) 2 / (mm) 51 Wall: (inch) 0.25 / (mm) 6.4 Working Pressure: (psi) 60 / (mpa) 0.41 Bend Radius: (inch) 5.5" / (mm) 140 *The #327 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, & USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved

Double Braided Nylon Dock Line - 1/2" x 50' - Black Features:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point

1/2" x 50' Boxed Reinforced PVC (FDA) Cold Water Feed Line Hose - Drinking Water Safe - Translucent Blue Trident 165 Series Blue - polyester reinforced PVC hose for "Cold Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures as low as -18.4ºF (- 28ºC) and can handle pressures up to 250 psi (varies based on i.d size). Features:  The Blue cover allows for easy identification of "Cold Water" lines on your boat   Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility This hose is safe for use with drinking water Application: Perfect for cold pressurized applications, water feed, drains, and vent lines Construction: Tube & Cover: Clear FDA tube  Color: Blue Transparent  Reinforcement: Polyester Temperature Range: -18°F to 149°F (-28°C to 65°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1/2" / (mm) 12.7 Outer Diameter: (inch) .777 / (mm) 19.6 Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17 Bend Radius: (inch) 0.98" / (mm) 25 *Burst Pressure is 4 x Working Pressure

1/2" x 50' Boxed Reinforced PVC (FDA) Hot Water Feed Line Hose - Drinking Water Safe - Translucent Red Trident 166 Series Red - polyester reinforced PVC hose for "Hot Water" feed lines. The FDA-grade tube is non-toxic, odorless, and tasteless. Suitable for use in harsh operating conditions with temperatures of up to 149ºF (65ºC) and can handle pressures to a maximum of 250 psi (varies based on i.d size).  Features:  The Red cover allows for easy identification of "Hot Water" lines on your boat Made of 3-ply polyester for excellent abrasion resistance and sustained flexibility This hose is safe for use with drinking water Application: Perfect for hot, pressurized applications, hot water feed, drains, and vent lines Construction: Tube & Cover: Clear FDA tube  Color: Red Transparent  Reinforcement: Polyester Temperature Range: -18°F to 149°F (-28°C to 65°C) Length: 50’ (15.24m) Specifications: Inner Diameter: (inch) 1/2" / (mm) 12.7 Outer Diameter: (inch) .777 / (mm) 19.6 Working Pressure: (PSI Vac In./Hg) 250 / (bar) 17 Bend Radius: (inch) 0.98" / (mm) 25 *Burst Pressure is 4 x Working Pressure

Shields Multflex Hose has a clear FDA formula PVC with black vinyl helix. It is abrasion resistant, flexible and resistant to mild chemicals and salt water. Primarily used for bilge pump discharge, potable water tank fill and drains. Uses 147 right hand thread cuffs. Do not attach to thru hull fitting below the water line. Do not use ethylene glycol based antifreeze in hose.

Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.

Flame retardant polypropylene wiring conduit, black with blue stripe. Split for easy access to harness. Meets ABYC and UL 94V2 standards. 50' length.

Sternflex 2" rigging hose used to cover harness and bracket mounted hoses on outboard engines. Polyethylene co-polymer wall with an integral polyethylene helix. Resistant to abrasion, crushing and UV. 3" bend radius.

Single layer corrugated polyethylene hose. Resistant to mild chemicals and salt water. Clamping cuff every 1 foot. Primarily used for bilge pump discharge. Do not attach to thru hull fitting below the water line.