Jabsco 17360-1001 Engine Cooling Pump For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973   Caterpillar, D-336, D-343, D-353, 3N1888   Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.   Pump Body: Bronze Port Size: 2-1/2" Flange Type Impeller: Neoprene use Jabsco 17370-0001-P Impeller Cam: Wear Resistant Polyurethane Cam/Liner Shaft Seal: Mechanical Face Seal Shaft: 316 Stainless Steel   Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Bronze flexible impeller engine cooling pump Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm Self-priming from dry up to 2.4m (7.8ft)   Minor plumbing modifications may be required for certain applications.   Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive   

Jabsco 18940-0010 Engine Cooling Pump 1 1/4" Ports Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt     This Jabsco alternator mounted engine driven water pump has been used on a wide range of engines including Chrysler, Lehman, and Powerhouse Marine. Engineered for marine applications and a long service life, the body is cast bronze and features a stainless steel shaft. Impeller access is available by removing the front portion of the pump body. Hose barbs are cast into the pump body so that tail pieces are not required for installation. Pump is driven by a 6 1/2" pulley that is compatible with type A belts.   Key Features Flange mounted engine driven flexible impeller water pump Self-priming at slow RPMs Includes 6 1/2" pulley compatible with type A belts Corrosion resistant bronze pump body  Stainless steel shaft for superior corrosion resistance   Compatible engines   Chrysler: replaces Sherwood model G5 LM 318 LM 340 LM 360 LM 383 LM 400 LM 440 Lehman 302, 351 cu. in. Powerhouse Marine 302, 351 cu. in.  

Jabsco 18830-0000 Pump For Chris Craft - FEATURES Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt (on some versions)     APPLICATIONS / CHARACTERISTICS Marine Engine Cooling.     Jabsco Engine Cooling Pump For Chris Craft 305 327 350 CID  

Jabsco 90076-0015 Kit for 15170-Series Sanitary Pumps Parts included with this kit: 92000-0030 X 2 8984-0005 X 1  90023-0000 X 1   This kit is put together at time of order, that is why you see 0 in stock.

Jabsco 17540-0201 Engine Cooling Pump Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump   Impeller: Neoprene Shaft Seal: Carbon/Ceramic Mechanical Seal Port Size: 3 Inch   This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines,  Detroit Diesel pumps 23525200, 23522735, 23535447. 

Jabsco 2570-3100 Engine Cooling Pump FEATURES Pump Body: Bronze Ports: Flanged Impeller: Neoprene Shaft: Stainless Steel     APPLICATIONS / CHARACTERISTICS Engine Cooling Pump. Detroit Diesel.     Jabsco Engine Cooling Pump, 5 cover screws 2 1/2 inch Impeller depth   Detroit Diesel 653 671 853 23507971 5186250 5107480 23501083 2313002 5137208 5115396      

Jabsco 6980-3100 Engine Cooling Pump   FEATURES Pump Body: Bronze Port Size: Flanged Ports Impeller: Neoprene Shaft Seal: Mechanical Shaft: Stainless Steel     APPLICATIONS / CHARACTERISTICS Engine Cooling Pump.     Jabsco Engine Cooling Pump, 5 cover screws with 3 1/2 inch Impeller depth   Detroit Diesel 671TI 871 1271 23507972 5122599 8924265 23501769    

Jabsco 18830-1020 Engine Cooling Pump Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel   Jabsco  18830-1020 Engine Cooling Pump with High Pressure Impeller, 3/16" Pulley Key and No Pulley or Pulley Mounting Plate.  

Jabsco 18840 Series Engine Cooling Pump Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter "A" belt   Jabsco Engine Cooling Pump High Pressure 1" Hose Ports With 6 1/2" "A" Belt Pulley  

Jabsco 18930-0000 Pump 1 1/4" with Pulley Adapt Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter A belt   Jabsco Engine Cooling Pump with 1 1/4" Hose Ports and Pulley Adaptor that fits Chris-Craft 454 C.I.  

Jabsco 18930-0020 Engine Cooling Pump 1 1/4" Hose Ports Pump Body: Bronze Port Size: 1 1/4" ID Hose GPM: 15 Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Shaft Key: 3/16" Pulley: 6 1/2" diameter A belt   Self-priming from dry up to 2.4m. Constructed from marine quality bronze and stainless steel. Mechanical seal. Easy to service and maintain. Handles hard and soft solids without clogging. Will tolerate abrasive wear. Can pump in either direction.   Will not airlock.    

Jabsco 3270-0001 Engine Cooling Pump 3/4" Ports Flange Mount Perkins 4-107 Perkins 4-108 Fitting: 3/4 in. NPT Size: 4 1/4 in. long x 4 1/8 in. wide x 3 7/8 in. high Weight: 4 lb (1.8 kg) Drive: Coupling Mount: Engine    

Jabsco 50310-1001 Gear Driven Engine Cooling Pump Pump Body: Bronze, Flange Mounted To Engine Ports: 32mm, 1-1/4" Shaft Seal: Mechanical Seal Shaft: Tapered Shaft To Accept Engine Builder Supplied Gear Gear Is Not Included   Found on Northern Lights (Luger) Generators and John Deere. These same parts also fit the 30510-7001 pump.  

Jabsco 18830-0010 Engine Cooling Pump with 6 1/2" Pulley Pump Body: Bronze Port Size: 1" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel Pulley: 6 1/2" diameter A belt  

Jabsco 18930-0010 Engine Cooling Pump Pump Body: Bronze Port Size: 1 1/4" ID Hose Impeller: Neoprene Shaft Seal: Carbon-Ceramic Face Type Shaft: Stainless Steel  Pulley: 6 1/2" diameter A belt