General Pump WM4215CL Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump. This General Pump WM4215CL has dual inlet and outlet porting. It features the following specs: right hand, 5/8" hollow shaft, 4.2 GPM, 1500 PSI, 1750 RPM   Product Description Reverse Osmosis Pump - Right Shaft This pump is from the General Pump WM Series. It is a reverse osmosis, hollow shaft pump with roller bearings. See Related Products for compatible pump oil. • 316 stainless steel wet-end • 300 Series stainless steel fasteners • Parallel inlet and outlet valve design for efficiency and easy maintenance • Corrosion resistant valve and packing design • Innovative wear resistant high and low-pressure seals • Dual inlet and outlet porting • Anodized crankcase for corrosion resistance • NEMA 56C flange with 5/8” hollow shaft   Technical Specifications Bore: 18 mmStroke: 12.5 mmC rankcase Capacity: 12 oz.Max Temperature: 140º F Inlet Port: 1/2"Shaft Diameter: 5/8"Max GPM: 4.2Max PSI: 1500 RPM: 1750

General Pump WM4215CL Reverse Osmosis Pump with Motor This General Pump WM4215CL has dual inlet and outlet porting. Features 316 Stainless Steel wet-end and 300 Series stainless steel fasteners, and has a new generation seal system that allows for a longer life. Produces up to 4.2 GPM, at up to 1500 PSI.   Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance. NEMA 56C flange with 5/8” hollow left side shaft Corrosion resistant valve and packing design Innovative wear resistant high and low-pressure seals Dual inlet and outlet porting Anodized crankcase for corrosion resistance   Specifications: Max Volume: 4.2 GPM Max Discharge Pressure: 1500 PSI Max Pump Speed: 1750 RPM Max Inlet Pressure: 50 PSI Motor is a 10W18BCT   We build these at time of order. Please see the Literature for pump and motor specs.

General Pump WM4215C Reverse Osmosis Pump The WM Series Direct Drive Industrial Pressure Washer Pump or Reverse Osmosis Pump.   Hollow Shaft – General Pump WM Series Specs:   Reverse Osmosis Pump - Left Shaft Max. Inlet Pressure 50 PSI Max. Fluid Temperature 140 Degrees Fahrenheit Inlet Port Thread 1/2in. NPT/F Discharge Port Thread 3/8in. NPT/F Shaft Diameter 5/8in. Pump Dimensions 9.9in. x 7.5in. x 6.0in. Crankcase Oil Capacity 12 oz (use GP Series 100 Oil)     Hollow Shaft – General Pump WM Series Features: 316 stainless steel fluid end for superior corrosion protection. Solid ceramic plungers with advanced surface finish assure durability and longevity. Compact design offers solutions to space limitations. Parallel inlet and outlet valve design for efficiency and easy maintenance.  

General Pump 650021 Slinger Brass General Pump 650021 is a replacement slinger for WM Series reverse osmosis pumps.

SHURflo 8005-952-480 Diaphragm Pump Reverse Osmosis Booster Pump SHURflo Diaphragm Pump 3 Chamber, 21.8 GPH Open Flow, 24/36VDC Continuous Duty, 80 to 100 PSI Bypass (no switch), EPDM Valves, Santoprene Diaphragm, Nylon Housing, 3/8" NPT Female Ports   SHURflo 8000 Series RO Pumps are the most widely used pumps for RO. They are ideal for high pressure / low flow applications with low amp draw. They can be mounted in any position, are compact, and are designed for long trouble-free life.

General Pump W101/T1011 Pump 5.6Gpm General Pump T 47 series T1011 (Interpump W101) triplex pressure wash pump.   Maximum Rated Pressure: 2000 PSI   5.6 GPM @ 1450 RPM 4.5 GPM @ 1125 RPM Shaft Diameter: 24mm Inlet: 1/2" FPT Outlet: 3/8" FPT Unloader sold separately.   Do not install pump without unloader or pressure regulator. 

General Pump 650048 Gasket Rear Cover General Pump 650048 is a gasket for the rear cover on WM Series pumps. Compatible with models WM0515C, WM0815C, WM1015C, WM1615C, WM2315C, WM2415CL, WM3015C, WM3615C, WM4215C, WM2315C, WM3015C, and WM4215C.

General Pump 710002 Oil Seal Each pump requires three seals to service fully. Compatible Pumps: TC Series “60” TC1506GUI TC1507GUI TC1508GUI TC1509GUI TT Series 51, EBF T9051EBF TT9111EBF TT9061EBF TT9071EBF TT2021EBF TT2028EBF TT2035EBF WM Series WM0515C WM0815C WM1015C WM1615C WM2315C WM2415CL WM3015C WM3615C WM4215C WM2515S WM4215S  

General Pump WM02 Seal Kit Packing kit for standard General Pump WM series pumps including the WM0515C, WM0815C, WM1015C, WM1615C, WM2315C, WM2415CL, WM3015C, WM3615C, and WM4215C models. OEM replacement parts, guaranteed to fit. Use to repack pump during maintenance or repairs.   Includes: 66024, Anti-extrusion Ring (3) 701051, O-Ring, 70D (3) 90220000, Low Pressure Seal (3) 520376, Low Pressure Case Seal (3) 710010, Glyd Case, 18mm (3) 710011, Square Seal, 18mm (3) 520375, Seal Retainer (3) 701023, O-Ring (3)

Drill Pumps Jabsco drill pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Pumps up to 3.5 gpm Self-priming to 3ft 1/4" diameter shaft Supplied with 3/4" garden hose thread port adapters WARNING: This product can expose you to chemicals including COBALT METAL POWDER which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

General Pump 701133 O Ring Buna Made of Buna-N with a 70 Duro hardness.   Compatible Pumps: T Series 69 T41 CW Series 69 CW1012 WM Series WM0515C WM0815C WM1015C WM1615C WM2315C WM2415CL WM2315C WM3015C WM4215C WM3015C WM3615C WM4215C WM2315C WM3015C WM3615C WM4215C WM2515S WM4215S

General Pump 100295 Oil 30W 16 Oz 30W viscosity, non-detergent. Special anti-scuff and anti-wear agents extend the lives of gear, vane, radial piston, and plunger pumps. Resists formation of harmful oil water emulsions Exceeds wear prevention requirements of all major. One Pint Bottles.

General Pump 112 Repair Kit Genuine Interpump / General Pump Kit 112 16mm Packing Assembly Includes Brass Services one (1) cylinder *Three (3) kits are required for complete pump repair

Jabsco 17250-0003 Drill Pump, 1/4"   FEATURES Pump Body: Plastic Port Size: Connections for 1/2" (13mm) ID hose and 3/4" GHT female threaded fittings. Flow: up to 3.5 gpm (13 lpm) Impeller: Nitrile Shaft: 1/4" diameter shaft (6.5mm)     APPLICATIONS / CHARACTERISTICS Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" chuck can be operated. They provide easy powered pumping almost anywhere a hand utility pump might be used. Includes pump and Garden Hose Adaptors only.     Jabsco Drill Pump Only With 2 Garden Hose Adaptors 3.5GPM, 1/2" Hose and Garden Hose Ports  

General Pump 710005 Crankcase Oil Seal