|
Gianneschi ACB80E-110V Bronze 110V 1Ph 60Hz Self-Prime
Gianneschi ACB80E-110V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 110 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the ACB80E110V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oli and diesel, fire fighting, bilges, and water supplying.
|
1403.99 |
|
|
Gianneschi CP26-A1-230V Bronze Self Priming Pump
Gianneschi CP-26-A1-230V, CP Series Self Priming Liquid Ring Pump and Motor unit.
Pump Body: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch
Motor Specs :0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase.
|
1730.48 |
|
|
Gianneschi CP30-A2-110V 60HZ Brz Self Prim Pmp 110V 60Hz
CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Features:
Body Pump: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch
Motor Specs: 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase
|
1814.26 |
|
|
Gianneschi CP26-A1-110V 60HZ Bronze Self Priming Pump
Gianneschi CP-26-A1-110V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Pump Body: Bronze
Impeller: Bronze
Shaft: 316 Stainless Steel
Port Size: Inlet Port is 1 Inch, Discharge Port is 1 Inch
Motor Specs :0.37KW (0.5 Horsepower), 1450 RPM, 110 volts AC, 60 Hz, Single Phase.
|
1643.02 |
|
|
Gianneschi ACB80E-230V Mpu 230V 60Hz
Gianneschi ACB80E-230V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.37kW (0.5 Horsepower), 2900 RPM, 230 Volts AC, Single Phase. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the ACB80E230V include the pumping of liquids with high gas content or seawater, as well as in chain washing, oil and diesel, fire fighting, bilges, and water supplying.
|
1273.96 |
|
|
Gianneschi ACB80E-12V Bronze 12V Self-Prime Pump
Gianneschi ACB80E-12V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.45KW (0.6 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the ACB80E12V include chain washing, fire fighting, pumping seawater and liquids with a high gas content, diesel and oil pumping, bilges, and any water supplying applications.
|
1680.43 |
|
|
Gianneschi ACB331-230V Bronze 230V 1Ph 50/60Hz
Main pump features:
Outstanding self-priming
Side channel and liquid ring construction
Simple and compact
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Washing
Fire-fighting
S.W feeding
WPS - Hydrofore
Port Size: From 1'' 1/4 to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
4321.65 |
|
|
Gianneschi IDROMINI-ACB80E-12V Bronze 12V Water Pressure System
Main Water Pressure System features:
High quality, bronze self-priming centrifugal pump with star impeller
Includes pressure switch, membrane tank, pressure gauge and no-return valve
Painted steel with s/steel flange or totally s/steel tank
Tank capacity from 2 to 5 litres
|
2556.94 |
|
|
Gianneschi 01ACP2602A1 Self - priming liquid ring pump CP - 26 - A1 - 230V 0.37KW 0.5HP
The Gianneschi CP - 40G - 230V is a Bronze CP Series Self Priming Liquid Ring Pump and Motor unit with Bronze Impeller, 1 - 1/2 Inch by 1 - 1/2 Inch Ports, coupled to a 0.75 KW (1 Horsepower), 1450 RPM, 230 Volt AC, 50/60 Hz, Single Phase Motor. This pump is specially equipped with a bronze impeller and body, a 316 stainless steel shaft, an a high quality ceramic mechanical seal with graphite inox, as well as utilizes IP55 protections and Class F insulation. It is self - priming up to 8 m, it can go as high as 1750 RPM, and it operates at 60 Hz at 2 Hp. It is recommended that one install a clapet valve and filter with its suction pipe in order to avoid backflow through the pump, and the installed must pump water through it when either rebooting or first initializing it in order to achieve the necessary suction for it to automattically prime itself. Motor has F class Insulation, IP 55 Protection.
|
1426.50 |
|
|
Gianneschi CP-30G Bronze 230V 50Hz 1Ph Self Priming Pump
|
1834.67 |
|
|
Gianneschi ACB90E-24V Bronze 24V Self-Prime
Gianneschi ACB90-24V, ACB Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Brass impeller, 316 Stainless Steel Shaft. Motor is 0.44kW (0.6 Horsepower), 2800 RPM, 24 Volts DC. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications for the ACB9024V include water supplying, bilges, oil and diesel, chain washing, as well as in any applications involving the pumping of seawater or liquids that have a high gas content.
|
1807.61 |
|
|
Gianneschi BMA 50/160 B1 Motor and Pump 230V 1Ph
Gianneschi catalog # BMA-50/160-B1-230V-, BMA Series Self Priming Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 2.2 KW (3 Horsepower), 2900 RPM, 230 volts AC, 50/60 Hz, Single Phase.
Applications for the BMA50/160B1230V include chain washing, air conditioners, emptying operations, bilges, cooling systems, OEM, fire fighting, ballasts, gray water systems, as well as swimming pool filling.
|
4800.04 |
|
|
Gianneschi ACB332-24V 1 1/4" Self Prime 24V
Main pump features:
Outstanding self-priming
Side channel and liquid ring construction
Simple and compact
Applications:
Ballast
Bilge
Diesel oil
F.W./S.W. Washing
Fire-fighting
S.W feeding
WPS - Hydrofore
Port Size: From 1'' 1/4 to 1'' 1/2 BSP
Pump casing: Bronze
Impeller / Gear: Bronze
Shaft: Stainless steel
|
5133.35 |
|
|
Gianneschi ACB61E-12V Bronze 12V Self-Prime Pump
|
898.39 |
|
|
Gianneschi CP20-12V Bronze 12V Self-Priming Pump
Gianneschi CP-20-12V, CP Series Self Priming Liquid Ring Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 0.2KW (0.25 Horsepower), 2600 RPM, 12 Volts DC. Inlet Port is 3/4 Inch, Discharge Port is 3/4 Inch.
Applications for the CP2012V include liquid intake, grey water discharges, bilges, showers, diesel and oil, galleys, as well as in pumping seawater and fresh water. This pump is not suitable for viscous liquids or pumping abrasive liquids. Install the pump in a dry and well ventilated location.
The pump must be placed on a solid surface in the horizontal position, feet down. To reduce vibration block the machine with the bolts to the surface and install some vibration dumpers. These pump usually do not need any maintenance so long as the following precautions are taken. If there is a risk of freezing, it is necessary to empty the pump casing then fill the pump up before running it again. Make sure the pump never runs dry.
|
1252.88 |
|