Primetime Pump 24VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White

Primetime Pump 24VDC The original Seakeeper Pump that Eliminates Boat Roll and Pitch This pump comes with the Seakeeper connector. The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White    

Primetime Pump 12VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications: Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling Agricultural pump Industrial pump   SPECIFICATIONS: Flow: Up to 21 GPM Head Feet: Up to 23’ Housing: 316 Stainless Steel (Investment Cast) Cover: 316 Stainless Steel Impeller: 316 Stainless Steel Semi-Open Wearplate: 316 Stainless Steel Mechanical Seal: Carbon / Ceramic / Viton Bellows O-ring/Flapper: Viton Weight: 13 lbs Motor is painted White

Primetime SK Rebuild Kit for all Primetime Pumps This includes the following items: 28766 Acorn Nut 36863 Seal Assy Type 8-3/8" 35025 Gasket 34350 Washer SS:Flat 1.06X.50X.09 34033-EP SS Impeller Electropolished   These items are build to order.

Primetime 115volt Pump The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds.  A carbon / ceramic / Viton mechanical shaft seal is standard.  Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling, Agricultural pump, and Industrial pump.   SPECIFICATIONS: Flow………………………Up to 21 GPM Head Feet…………….Up to 23’ Housing……………….316 Stainless Steel (Investment Cast) Cover……………………316 Stainless Steel Impeller……………….316 Stainless Steel Semi-Open Wearplate……………316 Stainless Steel Mechanical Seal… Carbon / Ceramic / Viton Bellows O-ring/Flapper…….Viton Weight…………………18 lbs

Primetime Pump 230vac The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for Marine, Industrial, Agricultural or Commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   SPECIFICATIONS: Flow…………………….Up to 21 GPM Head Feet……………Up to 23’ Housing………………316 Stainless Steel (Investment Cast) Cover………………….316 Stainless Steel Impeller……………..316 Stainless Steel Semi-Open Wearplate………….316 Stainless Steel Mechanical Seal..Carbon / Ceramic / Viton Bellows O-ring/Flapper…..Viton Weight……………...16 lbs    

Yamada DP-10BAN 3/8" Aluminum Pump DP-10BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS Yamada® DP-10BAN series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8 gallons per minute (DP-15). DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.   Inlet (in): 3/8 Outlet (in): 3/8 Max Flow (gpm): 6.0 Max Temp: 180 Max Solid (in): 1/32 Valve Type (in): 1/4 Air Motor Material: Aluminum Body Material: Aluminum   Elastomer Material: Buna N

Yamada DP-10BPS 3/8" Santoprene Pump Port Size: 3/8" NPT Body Material: Polypropylene Diaphragm Material: Santoprene Maximum Flow Rate: 6 GPM Maximum Discharge Pressure: 100 PSI   Fluid Port: 3/8" NPT GPM: 6 Discharge Volume per Cycle: 0.020 gallons Air MotorAluminum Intake & Discharge Connections  Polypropylene (PPG): 3/8" Female NPT Aluminum (ADC-12): 3/8" Female NPT Stainless Steel (316): 3/8" Female NPT Air Inlet: 1/4" Female NPT (includes ball valve) Air Exhaust: 3/8" Female NPT (includes silencer)

Oberdorfer N992Rm-F01 White Gear Pump 3/8" 1/3Hp  

Oberdorfer 994-W 994 Gear Pump Painted White  

SeaLand VG4 J Series 24V Pump Replacement 385311230 Pump assembly for the VG4 (Vacuum generator 4) This assembly includes the following items: Pump to tank seal 2" Duckbills (4) 2" Check valve adapter Transition adapter 2" to 1.5" Pump mounting hardware Pump body Pump o'ring kit Bellows Bellows clamps Bellows bushing Eccentric Pump top closure Motor Pump cover  

Flojet Et508-221A W/Feet Pump Osc 115V Hp Epdm  

March 809 BRC HS 24VDC Mag-Drive Centrifugal Pumps Bronze 24VDC High Speed 5.5GPM   The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 24VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet  

March 809 BR HS Mag-Drive Centrifugal Pump Bronze 24V Pump The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.     March Pump Mag-Drive Centrifugal Pump Bronze 24VDC High Speed 7.5GPM 1/2"MPT Ports  

Jabsco 36950-2010 Pump W/24Vdc Motor