Primetime Pump 230vac The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for Marine, Industrial, Agricultural or Commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   SPECIFICATIONS: Flow…………………….Up to 21 GPM Head Feet……………Up to 23’ Housing………………316 Stainless Steel (Investment Cast) Cover………………….316 Stainless Steel Impeller……………..316 Stainless Steel Semi-Open Wearplate………….316 Stainless Steel Mechanical Seal..Carbon / Ceramic / Viton Bellows O-ring/Flapper…..Viton Weight……………...16 lbs    

Primetime SK Rebuild Kit for all Primetime Pumps This includes the following items: 28766 Acorn Nut 36863 Seal Assy Type 8-3/8" 35025 Gasket 34350 Washer SS:Flat 1.06X.50X.09 34033-EP SS Impeller Electropolished   These items are build to order.

Primetime 115volt Pump The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds.  A carbon / ceramic / Viton mechanical shaft seal is standard.  Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling, Agricultural pump, and Industrial pump.   SPECIFICATIONS: Flow………………………Up to 21 GPM Head Feet…………….Up to 23’ Housing……………….316 Stainless Steel (Investment Cast) Cover……………………316 Stainless Steel Impeller……………….316 Stainless Steel Semi-Open Wearplate……………316 Stainless Steel Mechanical Seal… Carbon / Ceramic / Viton Bellows O-ring/Flapper…….Viton Weight…………………18 lbs

Primetime Pump 12VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).   Applications: Marine Pump used for Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling Agricultural pump Industrial pump   SPECIFICATIONS: Flow: Up to 21 GPM Head Feet: Up to 23’ Housing: 316 Stainless Steel (Investment Cast) Cover: 316 Stainless Steel Impeller: 316 Stainless Steel Semi-Open Wearplate: 316 Stainless Steel Mechanical Seal: Carbon / Ceramic / Viton Bellows O-ring/Flapper: Viton Weight: 13 lbs Motor is painted White

Primetime Pump 24VDC The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White

Primetime Pump 24VDC The original Seakeeper Pump that Eliminates Boat Roll and Pitch This pump comes with the Seakeeper connector. The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.   Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm).   Applications Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, or RO pre pump and it is Marine ignition protected motors (ISO 8846) Agricultural pump Industrial pump   SPECIFICATIONS: Flow Up to 21 GPM Head Feet Up to 23’ Housing 316 Stainless Steel (Investment Cast) Cover 316 Stainless Steel Impeller 316 Stainless Steel Semi-Open Wearplate 316 Stainless Steel Mechanical Seal Carbon / Ceramic / Viton Bellows O-ring Flapper Viton Weight 13 lbs Motor is painted White    

Yamada DP-10BAN 3/8" Aluminum Pump DP-10BAN AIR POWERED DOUBLE DIAPHRAGM AODD PUMPS Yamada® DP-10BAN series Air Powered Double Diaphragm (AODD) pumps provide a maximum flow rate of 6 gallons per minute (DP-10) or 8 gallons per minute (DP-15). DP-10 pumps are available in aluminum, stainless steel (316), and polypropylene, DP-15 pumps are available in either polypropylene or groundable acetal. A wide selection of diaphragm materials cover a variety of applications.   Inlet (in): 3/8 Outlet (in): 3/8 Max Flow (gpm): 6.0 Max Temp: 180 Max Solid (in): 1/32 Valve Type (in): 1/4 Air Motor Material: Aluminum Body Material: Aluminum   Elastomer Material: Buna N

Primetime Hydraulic Pump This is a high performance self-priming 316 stainless steel centrifugal pump close coupled to a hydraulic motor.   The pump is ideal for Marine, Agricultural, and Industrial applications where suction lift is required.   The Primetime Hydraulic model features all 316 stainless steel components for superior corrosion resistance when pumping chemical compounds. A carbon/ceramic/viton bellows shaft seal is standard. Ports are ¾” NPT with a 1/8" NPT fill port. The check valve flapper design enhances the self-priming capability to 12 foot suction lift.   The hydraulic motor is designed with SAE #6 ports for the tank side while the pressure side has SAE # 4 ports. Maximum Pressure is 1000 PSI. Maximum Oil Flow is 3 GPM.   SPECIFICATIONS: Flow. . . . . . . . . . . . . . . . . . Up to 31 gpm Head . . . . . . . . . . . . . . . . . Up to 51’  Housing. . . . . . . . . . . . .... . 316 Stainless  Steel (Investment Cast) Cover . . . . . . . . . . . . . .... . 316 Stainless Steel (Investment Cast) Impeller . . . . . . . . . . .... . . 316 Stainless Steel Semi-Open (Sintered PM) Wear Plate . . . .  . . .. . ... . . 316 Stainless Steel Mechanical Seal . . . .. .. .. . . Carbon/Ceramic/Viton Bellows 150 PSI O-ring/Flapper . . . . .. ... . . . Viton Hydraulic Motor . . ... .. .. . . . Iron, Gerotor Type, .08 Cu. In. Displacement Weight . . . ... . . . . . . . ... . . 12 lbs.   APPLICATIONS • Marine • Agricultural • Industrial   PUMP CONSTRUCTION • 316 Stainless Steel Investment Cast   HYDRAULIC MOTOR SPECIFICATIONS • .08 cu. in displacement • Max. Oil Flow: 3 GPM • Max. Pressure: 1000 PSI   Hydraulic Motor Port Sizes: • SAE # 4 Pressure • SAE # 6 Tank   Pump Port Sizes: • 3/4” NPT • 1/8” NPT Fill Port

Scot Pump 35068-J-2.50 MOTOR/PUMP 2.5" IMPELLER Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • Heavy-duty. Use for continuous 24 hour – 7 day operation. • Stainless steel shaft.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Totally enclosed fan cooled IP-44 motors meet marine, European, and Coast Guard ignition protected requirements. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Motors are dual frequency 50 Hz or 60 Hz • Three phase motors are not available

Scot Pump 35067-2.50 Motor/Pump Unit • Compact • Enclosed Switch Compartment   Pump • All Bronze marine centrifugal pump Freshwater or seawater applications • Precision machined to close tolerances for consistent performance. • Hardware - Type 303 stainless steel • Semi-open impeller handles solids • 2.50" Impeller mounted on motor shaft • Heavy-duty, designed for continuous 24 hour – 7 day operation.   Shaft Seal • Rated at 75 PSI – 5 BAR • Seawater Buna rubber parts, ceramic stationary and carbon rotating element, stainless steel spring and metal components   Motor – 2 Pole • Meets Coast Guard ignition protected requirements. The thermal protector and starting switch are in the enclosed outlet cover. • Sealed ball bearings • Single-phase capacitor start 50 Hz - 110/220 Volt 60 Hz – 115/230 Volt • Dual frequency 50 Hz or 60 Hz single phase motors are available • Stainless steel shaft • Three phase motors are not available  

Gianneschi BMA 50/160 B1 Motor and Pump 230V 1Ph Gianneschi catalog # BMA-50/160-B1-230V-, BMA Series Self Priming Centrifugal Pump and Motor unit, Bronze construction, Bronze impeller, 316 Stainless Steel Shaft. Motor is 2.2 KW (3 Horsepower), 2900 RPM, 230 volts AC, 50/60 Hz, Single Phase.   Applications for the BMA50/160B1230V include chain washing, air conditioners, emptying operations, bilges, cooling systems, OEM, fire fighting, ballasts, gray water systems, as well as swimming pool filling.

Oberdorfer 109MB-10J36BJ-50/60 Dometic Low Profile AC Pump  

March 815 PL C Beer Pump March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).   At 60Hz SystemUS                Metric Max Flow8 GPM  30.3 LPM Max Head18.6 FT  5.7 M Power0.04 HP        0.029 KW   At 50Hz USMetric 7.9 GPM30 LPM 13.5 FT4.1 M 0.04 HP0.029 KW   Electrical: 115V 50/60Hz or 230V 50/60Hz Inlet: 3/8"FPT & 3/4"MPT Outlet: 1/2"MPT   Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Max Internal Pressure: 50 PSI / 3.4 bar Max Liquid Temperature: 250 °F / 121 °C   Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.   The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.

March 809 PL HS 115V 50/60 115V 50/60 Pump/Base 6'

Oberdorfer N992Rm-F01 White Gear Pump 3/8" 1/3Hp