Cat Pumps 2SF22ES Direct Drive Plunger Pump Pump Features:   • UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life • Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities. • Ultimate portability, less than 11 pounds, less than 10" long • Regulating unloader is standard on each pump to assure system pressure control and pump protection   Specifications:   • Triplex plunger pump • Direct drive with electric flange • Maximum volume: 2.0 GPM • Maximum discharge pressure: 1200 PSI • Maximum inlet pressure: 75 PSI • Maximum pump speed: 3450 RPM • Minimum horsepower requirements: 1.6 BHP • Bore: .708" (18mm) • Stroke: .122" (3.1mm) • Crankcase capacity: 11 oz. use CAT pump hydraulic oil • Inlet port: 3/8" FPT • Discharge ports: Dual 3/8" FPT • By-pass port: 1/4" FPT • Dimensions: 9.13" x 6.65" x 6.50"  

Cat Pump 1K303 Submersible Pumps 1K Series – Submersible Sump Pumps Stainless steel submersible sump pumps offer solutions to pumping semi-dirty water or fresh water with suspended solids up to 3/8".   Flow Range Up to 88 gpm Pressure Range (up to 24 PSI) 55 ft. Head RPM 3450 rpm Discharge Fitting 1-1/4", 1-1/2" NPT(F) Horsepower 1/3, 1/2, 3/4, 1, 1-1/2 HP Operation Manual or Automatic Maximum Temperature Continuous 122°F Intermittent 140°F Maximum Solids Diameter 3/8"

Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump with 8110 Motor. This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 2.5 gpm / 9.5 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel   Lead time about one week, this is a Special Order Item

Cat Pump 2SF10ES Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.   Technical Specifications Max Flow: 1 gpm / 3.8 lpm Max Pressure: 2000 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(M) RPM: 3450 Drive Type(s): Direct Material: Brass      

Cat Pump 2SF05SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 0.5 gpm / 1.9 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SF15SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 1.5 gpm / 5.7 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 2.5 gpm / 9.5 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.   Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.   Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.   Technical Specifications Max Flow: 2.85 gpm / 10.8 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers. Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation. Technical Specifications Max Flow: 3.5 gpm / 13.2 lpm Max Pressure: 1200 Inlet Port Size: 3/8" NPT(F) Discharge Port Size: 3/8" NPT(F) RPM: 1725 Drive Type(s): Direct Material: 316 Stainless Steel

Cat Pump Bearing 13832

Cat Pump 2SF22ELS DIRECT DRIVE PLUNGER PUMP This is a Cat Pump triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a Brass manifolds, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o'rings. This is a hollow-shafted pump designed to bolt directly to a c-face electric motor, providing easy, compact installation.   Technical Specifications Max Flow: 2.2 Min Pressure: 100 Max Pressure: 2000 Inlet Port Size: 3/8"NPT(F) Discharge Port Size: 3/8"NPT(F) RPM: 1725 Drive Type(s): Direct Material: Brass (BB)

Cat Pumps 241 2.6GPM Plunger Pump   Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.      This Cat Pump 241 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.   Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.    Technical Specifications Max Flow:3.6  Min Pressure:100  Max Pressure:1200  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:1725 Drive Type(s):Belt Material:Stainless Steel (SS)   The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.  

Cat Pump Pop-Off Valve 1-6Gpm 1000-

Cat Pump 3520 35 Pfr Pump 35Gpm 2K Psi CAT Pumps 3520 is a triplex plunger pump designed to deliver smooth, low pulsation flows at a wide variety of pressures and flow rates. Perfect for use in continuous duty, high pressure applications including Car/Truck Wash, Industrial Cleaning, Pressure Washing, Reverse Osmosis, Water Misting and more. Exclusive high pressure seal design means seals are lubricated and cooled by the solution being pumped. Features 304SS valve assemblies and NBR (Buna-N) seals and O-rings. Dimensions:  23.86 X 18.11 X 9.72 Features Triplex design delivers high efficiency and low pulsation. Durable dual V-Packings are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure seals provide secondary protection against external leaks and require no packing adjustments. Special high-density, polished, concentric plungers provide a true wear surface and extended seal life. Specially formulated Seals and V-Packings offer unmatched performance and extended life. Interchangeable inlet and discharge valves for easy servicing. Wet-end easily serviced without entering crankcase. Specifications Maximum Flow: 25 GPM Maximum Pressure: 2000 PSI Maximum Temperature: 140° F RPM: 870 Inlet Port: 1.5" NPT-F Outlet Port: 1" NPT-F

Cat Pump 247 is a triplex [three plunger rod] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.   Technical Specifications Max Flow:3.6  Min Pressure:100  Max Pressure:1200  Inlet Port Size:0.5 Discharge Port Size:0.37 RPM:1725 Drive Type(s):Belt  Material:Nickel Aluminum Bronze (NAB)