Cal Pump MS-580-20 Pump 580Gph 115/120V 20'Cord Cal Marine Pumps are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard Premium stainless steel and bronze construction for longevity 115 Volts - 20ft power cord - 3 wire; black, white, green ( NO PLUG ON END ) Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm) Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air (below water level) Viton seals suitable for harsh marine applications 3/4" MPT Intake and 1/2" MPT Discharge Approximate dimensions: 4-1/2" x 6-1/4"  

Cal MS-580-20-2B Pump 580Gph 230V 50/60 Cal Pump Centrifugal Pump, Stainless and Bronze Body, 580GPH No Flow Control, 230V 50/60Hz with 20 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 24,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

Cal Pump MS320P-6B SS/Bronze Pump 375Gpm 115V Cal Marine are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard Premium stainless steel and bronze construction for longevity 115 Volts - 6ft power cord - 3 wire; black, white, green Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm) Can be used in hot water applications up to 110°F Extremely quiet operation Use submerged or in open air (below water level) Viton seals suitable for harsh marine applications 1/2" MPT Intake and 1/4" MPT Discharge Approximate dimensions: 3-3/4" x 4-1/2" One year warranty Pump Applications: Ideal for harsh marine applications

Cal MS-1200-6B Pump 1200Gph 115V with Base and Cord Centrifugal Pump Stainless and Bronze Body 1200GPH No Flow Control 115V 60Hz with 6 Foot Power Cord 3/4" Male NPT Inlet and 1/2" Male NPT Outlet Viton Seal Can Run in Open Air or Submersed For Fresh or Salt Water up to 110F Can Be Used With Marine AC Units up to 60,000BTU Approved for: UL, CE, ABYC and USCG Includes 2 Nylon Mounting Brackets

Cal MS-900-6B Pump 900Gph 115V W/Base Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 115V 60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

Cal MS-900-6-2B Pump 900 Gph 220V W/Base Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 230V 50/60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets

Iwaki MD-30RLT, 3/4 inch MPT in/outlet 480gph 120v Iwaki MD 30RLT Water Pump   Japanese pressure rated flow water pump. 3/4 inch MPT inlet and outlet. 1/16 HP Motor output. 3150 RPM motor speed. 0.8 amps. Max flow 10.0 GPM. 480 GPH at 6 feet of head. Max head 17.7 ft. Max system pressure 11.60 psi.   Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

Iwaki MD-70RLT, 1 inch MPT in/outlet 1440gph 120v Iwaki MD-70RLT Water Pump   Japanese pressure rated water pump. 1 inch MPT inlet and outlet. 1/4 HP Motor output. 3400 RPM motor speed. 120 volt 2.80 amps. Max flow 25.6 GPM. 1440 GPH at 6 feet of head pressure Max head 31.8 ft. Max system pressure 21.33 psi.   Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

March 815-PL Beer Pump March Pump's 815-PL Beer Pump is an American seal-less centrifugal magnetic drive pump ideal for home brewing. It is capable of generating a maximum flow of 7 gallons per minute at 4.5 feet, and its maximum head is 18.6 Feet (or around 8PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polysulfone, Stainless Steel, Teflon, Silicone and Ryton/Teflon/Glass. The inlet connection is 0.5 inch male pipe thread, and the outlet is 0.5 inch male pipe thread. The standard motor is a 1 Phase 115V or 230V 0.04 Horsepower fan cooled motor, which can be run on either 50 or 60 hertz (there are performance differences between the hertz options).  The 815-PL Beer Pump motor has a six foot cord, a plug, and a base.  The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 250 Fahrenheit or 121 Celsius.   The 815-PL Beer Pump pumps Hot Water and Hot Wort.     Unit System 60Hz 50Hz Max Flow 7 GPM 22.7 LPM Max Head 18.6 FT 4.1 M Power .04 HP .029 KW Electrical 115V 50/60HZ   Type Centrifugal Mag Drive Inlet 1/2"MPT Outlet 1/2"MPT Wet End Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller) Can handle liquids of 250F Materials are FDA Food Compliant With 6 Foot Cord and Plug Components are UL Recognized American Made    

Iwaki MD-55RLT, 1 inch MPT in/outlet 990gph 120v Iwaki MD55RLT Water Pump   Japanese pressure rated water pump. 1 inch MPT inlet and outlet 1/8 HP Motor output. 3400 RPM motor speed. 120 Volt 1.60 amps. Max flow 18.4 GPM. 990 GPH at 6 feet of head. Max head 26.9 ft. Max system pressure 17.06 psi.   Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

Iwaki MD-70RLZT, 3/4 inch MPT in/outlet 684gph 120v Iwaki MD-70RLZT Water Pump   Japanese high pressure rated water pump. 3/4 inch MPT inlet and outlet. 2/7 HP Motor output. 3400 RPM motor speed. 120 volt 3.80 amps. Max flow 11.4 GPM 684 GPH Max head 66.6 ft. Max system pressure 42.7 psi.   Iwaki water pumps are magnetic driven, seamless pumps for use on either freshwater or saltwater aquariums. These pumps have a low heat exchange rate combined with quiet operation. Also the Iwaki pumps have a highly durable and aquarium tested design.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RLZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

Iwaki WMD-40RLT 3/4 inch MPT in/outlet 720gph 120v Iwaki WMD 40RLT Water Pump   American motor pressure rated water pump. 3/4 inch MPT inlet and outlet 1/12 HP Motor output. 3200 RPM motor speed. 120 volt 1.90 amps. Max flow 13.7 GPM. 720 GPH at 6 feet of head Max head 21.3 ft Max system pressure 14.22 psi.   WMD pumps have American Made Motors MD pumps have Japanese Made Motors RLT pumps are for pressure applications RZT pumps are for very high pressure applications RLXT pumps are for circulation and wet or dry return

Cal Pump MSUBM Nylon Bracket Fits All But 225 320 Nylon Mounting Brackets for 580, 900 and 1200 Pumps. Includes One Pair of Brackets.

Cal Msr-12 Repair Kit For 1200  Cal Pump Repair Kit for MS-1200 MS1200 Pumps, includes: Impeller, Volute, O-Ring, Hardware. No Flow Control Valve

Little Giant Submersible Pump 527176 Little Giant NK-2 with 18' cord Submersible Pump Motor 115 Volt 60 Hz 1/40 HP Permanently Lubricated Oil Filled Motor, 325 GPH at 1 Foot Head, Shutoff Head 12.3 Feet, Inlet: Screened, Outlet: 1/4" MNPT or 1/2" Tubing with Elbow Fitting and Garden Hose Adaptor, Nylon Body, Fluid Temperature Up to 120F (49C), 18 Foot Power Cord   527176 For commercial, industrial, and home use worldwide where liquid must be transferred or recirculated. Applications include aquariums, swimming pools, water displays, ice makers, air conditioners, boat bailing, fuel oil transfer, circulating water for welding and pipe threading machines, pumping mild chemicals such as soap solutions, acids, plating solutions and fertilizers