|
Heavy Duty Positive Displacement Reversing Vane Pump - 24V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 6.5
Breaker DC: 15 Amp
|
610.67 |
|
|
Heavy Duty Positive Displacement Reversing Vane Pump - 12V
GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: Pump Mounted Reversing Switch
Max GPM: 6.5
Breaker DC: 30 Amp
|
604.00 |
|
|
Heavy Duty Positive Displacement Vane Pump - 24V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 15 Amp
|
415.33 |
|
|
Heavy Duty Positive Displacement Vane Pump - 12V
GROCO Vane Pumps are self-priming and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft.
Specifications:
Self Priming: YES
Thread NPT: 1/2" + Garden Hose Adaptor
Control Type: None
Max GPM: 6.5
Breaker DC: 30 Amp
|
408.67 |
|
|
Reversible Vane Pump
Diesel Transfer Pump
Flow rate: 7.9 USgallons/min)
Self-priming from dry up to 3ft
The Jabsco Reversible Rotary Vane Pump is ideal for transferring diesel fuel. It is self-priming to about three feet and can pump against a discharge head up to twenty feet. With its integral on-off reversing switch, it is ideal for moving fuel between port and starboard fuel tanks.
Features:
The pump head may be mounted at 90°
increments on the motor to allow mounting as needed
Meets USCG 183.410 & ISO8846 Marine (Ignition Protection)
Motor
Intermittant duty permanent magnet type with reversing switch
Port Type
1/2" NPT Female or 1" (25mm) Hose barb
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
407.03 |
|
|
Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSI
Flojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life.
All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.
Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
196.66 |
|
|
Groco C-60 24V Deck Wash Pump, 24Volt
Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 24VDC
More Info: C60
|
732.96 |
|
|
OBERDORFER CB9000L CAST IRON GEAR PUMP 1"
FEATURES:
• Flows to 24.8 GPM
• Max. RPM: 1725
• Max. PSI: 100
• Suction lift to 19.5 ft.*
• Maximum viscosity to 100,000 SSU at reduced speed
(max. input torque of 160 in.-lbs.)
• Housing gasket: Vellomoid
• Construction: Cast Iron housing, Steel gears, Steel shafts
• Shaft Seals: Synthetic Braided compression packing with Teflon dispersion
• Shaft Bearing Journals: Grease lubricated Cast Iron
• Temperature range: -20 to 210° F
• Maximum working pressure: 130 PSI
• Pumps can operate bidirectionally (reversible)
This Oberdorfer CB9000L is the drop in replacement for models C4K and C4V. It can also be considered as replacements for models 4KHK4 and 4KHJ7.
This self-priming, positive displacement, external rotary gear pedestal pump is ideal for oil based fluids in a wide
range of light-duty commercial, industrial, marine, and agricultural applications.
It is for use with particulate free and non-abrasive high lubricating oil-based fluids compatible with iron and steel.
Not to be used with water-based fluids. Line mounted pressure relief valves are recommended to protect downstream
equipment.
The pump should be mounted on a rigid base and properly aligned with the motor. Direct drive via flexible shaft coupling is the preferred method. When a belt drive is needed, additional support is necessary to absorb the added pulley load.
|
522.19 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump with 8110 Motor.
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
Lead time about one week, this is a Special Order Item
|
1920.48 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.85 gpm / 10.8 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ42SEEL 2Sfq Pump 5/8 Elec Ss 4.2/12
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow
4.2 gpm / 15.9 lpm
Max Pressure
1200
Inlet Port Size
3/8" NPT(F)
Discharge Port Size
3/8" NPT(F)
RPM
1725
Drive Type(s)
Direct
Material
316 Stainless Steel
|
1408.32 |
|
|
Tuthill 0LEV-C-A-7 Pump
Tuthill 0LEV-C-A-7 Pump with Relief valve CW rotation only with Tang Shaft
Tuthill 0LE Series are compact, highly efficient, cast iron positive displacement rotary gear pumps with a mechanical seal. Pumping action is based on a rotor, idler gear, and a cover cast with a crescent-shaped partition. They are self priming and particularly suited to handle liquids of 35 to 1000 SSU viscosity. Higher viscosities can be handled at reduced speeds. The pump has a non-pulsating flow and runs substantially quieter than other pump designs.
Features :
Pump Body: Cast Iron
Relief Valve: Relief valve is factory set to 55 PSI for spring adjustment between 55-120 PSI.
Shaft Seal: Mechanical Seal Viton
Port Size: Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT.
|
611.00 |
|
|
Cat Pumps 231 2.3GPM
Small Marine Systems (0.5 to 20 gpm, 1.9 to 75.7 lpm) Our compact, lightweight models are an ideal fit for small pleasure craft and portable units. Compact Direct Drive Models are available to meet small footprint demands and emit low noise levels.
This Cat Pump 231 is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of 316 SS manifolds, 316 SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. The 1725 RPM permits a close coupled installation using a bell housing and flexible coupling or direct-drive motor-pump unit.
Technical Specifications
Max Flow:2.3
Min Pressure:100
Max Pressure:1500
Inlet Port Size:0.5
Discharge Port Size:0.37
RPM:1725
Drive Type(s):Belt
Material:Stainless Steel (SS)
The rugged durability of Cat Pumps can withstand the corrosive environment in which they are subjected and they have proven to be true workhorses in the desalination field.
|
2702.04 |
|